Manufacturing Technology 2024, 24(2):324-331

Research on Piston Avoidance Valve Pit Milling Method

Changlong Zhao ORCID..., Hongnan Ma ORCID..., Qinxiang Zhao ORCID..., Xiaoyu Jia ORCID..., Haifeng Zhang ORCID...
College of mechanical and vehicle engineering, Changchun University, Changchun 130022. Changlong Zhao, China

In order to improve the processing efficiency and surface quality of the piston avoidance pit, reduce labor costs, and make the processing of the piston avoidance pit meet the modern production re-quirements, it is realistic and feasible to combine Pro/E and Mastercam software to complete the processing of the piston avoidance pit. Two different kinds of piston pits are selected for machining, and the 3D model of the piston pits is established by Pro/E software, and the process preparation and parameter setting are realized by Mastercam software, and the NC machining simulation is con-verted into NC code to realize the machining of the piston pits; two different surface finishing meth-ods are used in Mastercam software to complete the machining of the piston pits. The two different surface finishing methods are analyzed for their effects on the programming of the piston avoidance pit, and a method to improve the efficiency and surface quality of the piston avoidance pit is derived to further improve the machining method of the piston avoidance pit and provide reference for the subsequent machining of the piston avoidance pit.

Keywords: Piston avoidance valve pit, CNC machining, Surface finishing, Mastercam

Received: November 11, 2023; Revised: March 14, 2024; Accepted: April 16, 2024; Prepublished online: April 17, 2024; Published: April 30, 2024  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Zhao C, Ma H, Zhao Q, Jia X, Zhang H. Research on Piston Avoidance Valve Pit Milling Method. Manufacturing Technology. 2024;24(2):324-331.
Download citation

References

  1. X. ZHAO, F. LIU AND C. WANG (2022). Effects of different piston combustion chamber heights on heat transfer and energy conversion performance enhancement of a heavy-duty truck diesel engine. Energy, 249. Go to original source...
  2. H. DERESSO, R. B. NALLAMOTHU, V. R. ANCHA AND B. YOSEPH (2022). Numerical study of different shape design of piston bowl for diesel engine combustion in a light duty single-cylinder engine. Heliyon, 86. Go to original source...
  3. B. WU, Q. CONG AND P. XI (2015). Optimized design of internal engine piston skirt with bionic structure. Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, pp.287-293 and 318.
  4. R. ANNAMALAI, R. KUPPUSAMY AND S. K. RAMACHANDRAN (2018). Effect of piston bowl geometry and different injection pressure on the performance, emission, and combustion characteristics of diesel engine using biodiesel blend. Thermal Science, 223, pp.1445-1456. Go to original source...
  5. Y. ZHANG, W. LIU, S.-Y. ZHANG, Y.-Q. PEI, M.-M (2022). Dong and J. Qin. Optimization on thermal load of combustion chamber on two/fourstroke switchable diesel engine. Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 523, pp.504-514.
  6. LIU HAIDONG (2015). Die Design and NC Machining of Engine Crankshaft Based on Pro/E and Mas-terCAM. Mechanical Engineer, 06, pp.31-32.
  7. H. YAN, H. L. CHEN, P. YU AND D. LONG (2022). Research on simulation experiment of the corn seed precision metering device based on Pro/E. International Journal of Materials & Product Technology, pp.641, 1-22. Go to original source...
  8. LU, H. Q. (2019). Design of Function Mechanism of Hinge Four Bar Linkage Based on Pro/E Parameterization. AIP Conference Proceedings, 2073. Go to original source...
  9. W. H. ZHANG, Z. WEN, Y. F. YE AND S. H. ZHOU (2022). Structural mechanics analysis of bolt joint of rigid flexible coupling manipulator. Journal of Measurements in Engineering, 102, pp.93-104. Go to original source...
  10. M. SADILEK, L. KOUSAL, N. NAPRSTKOVA, T. SZOTKOWSKI AND J. HAJNY (2018). The analysis of accuracy of machined surfaces and surface roughness after 3axis and 5axis milling[J]. Manufacturing Technology, 186, pp.1015-1022. Go to original source...
  11. S. KAMARUDDIN, M. N. ROSDI AND N. A. SUKINDAR (2021). Optimization of Drilling Path Using the Bees Algorithm. Manufacturing Technology, 216, pp.788-792. Go to original source...
  12. M. A. IBRAHIM, H. KAI AND M. M. USMAN (2020). Application of CAD/CAM in the Design of Machining Process and Tooling Devices for Flange Tube. Jurnal Kejuruteraan, 321, pp.17-23. Go to original source...
  13. R. O. PILECCO, K. S. DAPIEVE, G. C. ARAGONEZ, L. F. GUILARDI, G. S. DE ANDRADE, K. S. MOREIRA, T. A. D. L. BURGO, R. M. DE MELO, L. F. VALANDRO AND M. P. RIPPE (2022). Surface milled by CAD-CAM system Vs laboratory methods to simulate the milled surface: Effect on the resin bond strength to lithium disilicate glass-ceramic[J]. International Journal of Adhesion and Adhesives, 113. Go to original source...
  14. SONG GUOLONG (2009). Analysis of Machining Features in Surface Modeling Based on Master CAM. Journal of Shaanxi University of Science & Technology, 2705, pp.127-129.
  15. ZHANG KUNZHUAN (2014). Application of CNC Machining Technology on the Manufacturing of the Piston Head. Mechanical & Electrical Engineering Technology,43(06), pp.125-128.
  16. A. S. PATIL, V. K. SUNNAPWAR, K. S. BHOLE AND Y. S. MORE (2021). Experimental investigation and fuzzy TOPSIS optimisation of Ti6Al4V finish milling. Advances in Materials and Processing Technologies. Go to original source...
  17. J. W. MA, X. LU, G. L. LI, Z. W. QU AND F. Z. QIN (2020). Toolpath topology design based on vector field of tool feeding direction in sub-regional processing for complex curved surface. Journal of Manufacturing Processes, 52, pp.44-57. Go to original source...
  18. YU YONG, GAO JUNLI (2016). Process Design of NC Machining for the High Precision Complex Type Mask Mold Surface. Die & Mould Manufacture, 16(02), pp.77-80.
  19. HAN YIJIAN (2009). Contour & Surface - Contour of MasterCAM. Manufacturing Technology & Machine Tool,09, pp.73-76.
  20. GUO DEQIAO (2018). On Angular Surface Processing Parameter Programming Based on Ball End Milling Cutter. Modular Machine Tool & Automatic Manufacturing Technique, 05, pp.98-100.

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.