Manufacturing Technology 2024, 24(4):532-538 | DOI: 10.21062/mft.2024.060
Modern Conversion Layers as High-Performance Alternatives to Aluminum Anodizing and Its Alloys
- Czech technical university in Prague, Faculty of mechanical engineering, Department of manufacturing technology, Technická 4, Prague, Czech Republic
The paper focuses on a novel and perspective surface treatment technology called Plasma Electrolytic Oxidation (PEO) applied to aluminium and its alloys. This innovative technology generates layers with specific properties, particularly suitable for tribological and heat-resistant applications. Plasma Electro-lytic Oxidation technology represents an alternative to conventional oxidation methods, offering high utility properties and presenting a completely new approach to surface modification.
Keywords: PEO (Plasma Electrolytic Oxidation), Non-ferrous Metal Anodizing, Conversion Layers, Conventional Anodization
Received: February 5, 2024; Revised: June 16, 2024; Accepted: June 17, 2024; Prepublished online: August 2, 2024; Published: September 1, 2024 Show citation
References
- DEHNAVI, Vahid. Surface modification of aluminum alloys by plasma electrolytic oxidation. The University of Western Ontario (Canada), 2014.
- V. DEHNAVI, B.L. LUAN, D.W. SHOESMITH, X.Y. LIU, S. ROHANI, Effect of duty cycle and ap-plied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior, Surf. Coatings Technol. 226 (2013) 100-107.
Go to original source...
- V. DEHNAVI, X.Y. LIU, B.L. LUAN, D.W. SHOESMITH, S. ROHANI, Phase Transformation in Plas-ma Electrolytic Oxidation Coatings on 6061 Aluminum Alloy, Surf. Coatings Technol. 251 (2014) 160-114
Go to original source...
- R.H.U. KHAN, A. YEROKHIN, X. LI, H. DONG, A. MATTHEWS, Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: Effect of current density and electrolyte concentration, Surf. Coatings Technol. 205 (2010) 1679-1688.
Go to original source...
- ZYSKA, A., BOROŃ, K. Comparison of the Porosity of Aluminum Alloys Castings Produced by Squeeze Casting. Manufacturing Technology, 2021, vol. 21, iss. 5, p. 725-734.
Go to original source...
- CAISOVA, K., LATTNER, M. AND CAIS, J. Durable Material Deposition via PTA upon Al-alloys. Manufacturing Technology, 2022, vol. 22, iss. 1, p. 10-13.
Go to original source...
- DOLUK, E., RUDAWSKA, A., STANČEKOVÁ, D. AND MRÁZIK, J. Influence of surface treatment on the strength of adhesive joints. Manufacturing Technology, 2021, vol. 21, iss. 5, p. 585-591.
Go to original source...
- CHVOJKA, Martin a KUDLÁČEK, Jan. Vývoj laboratorního zařízení pro Plasmovou Elektrolytickou Ox-idaci (PEO). In: TECHNOLOGICAL FORUM 2019. 2019. Jaroměř: Ing. Kudláček, 2019, s. 33-41. ISBN 978-80-87583-30-2.
- CHVOJKA, Martin; ŠVORC, Jan; KULDÁČEK, Jan a KREIBICH, Viktor. MODERN PEO LAYERS ON NON-FERROUS METALS. In: Technological forum 2018 Book of Proceedings. 2018. Jaroměř: Ing. Kudláček, 2018, s. 86-90. ISBN 978-80-87583-26-5.
- DRAŠNAR, Petr; CHVOJKA, Martin; KUCHAŘ, Jan; HAZDRA, Zdeněk a MARUSIČ, Lukáš. TRIBOLOGICAL PROPERTIES OF MODERN COATINGS ON ALUMINIUM. In: International Conference on Innovative Technologies, IN-TECH 2019, Belgrad. 2019. Belgrad: Faculty of Engineering University of Rijeka, 2019, s. 138-141. ISSN 0184-9069.
- CHVOJKA, Martin; KREIBICH, Viktor; KUDLÁČEK, Jan a SVOBODA, Jakub. Moderní konverzní vrstvy jako výkonná alternativa k eloxování hliníku a jeho slitin. In: Progresivní a netradiční technologie povrchových úprav - 19. mezinárodní odborný seminář. 2023. Jaroměř: Ing. Kudláček, 2023, s. 102-107. ISBN 978-80-87583-42-5.
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.