Manufacturing Technology 2024, 24(4):588-593 | DOI: 10.21062/mft.2024.061

Thermal – Static Analysis of the Brake Disc in SolidWorks

Daniela Koštialiková ORCID..., Mariana Janeková ORCID..., Petra Dubcová ORCID..., Marek Hulc
Faculty of Industrial Technology in Puchov, Alexander Dubcek University of Trencín, I. Krasku 491/30, 020 01 Puchov, Slovakia

The work deals with the creation of 3D model of a disc brake of a personal vehicle, followed by a simula-tion of thermal and strengh analysis during car braking in the SolidWorks program. The disc brake is made of a gray cast iron, the most common material for this application. Cast iron discs offer excellent performance, making them suitable for various types of vehicles. The deformation of a brake disc was analyzed by using the program SolidWorks, where the first a simulation of the thermal load was per-formed, the aim of which was to determinate the temperature distribution on the brake disc and display the temperature rise during braking. In the next part, the simulation of strength deformation was carried out, and thus determination of the ther-mal load effect of the brake pads on the brake disc.

Keywords: Disc brake, Thermal analysis, Static analysis, Drum brakes, SolidWorks

Received: September 12, 2023; Revised: June 18, 2024; Accepted: June 20, 2024; Prepublished online: August 2, 2024; Published: September 1, 2024  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Koštialiková D, Janeková M, Dubcová P, Hulc M. Thermal – Static Analysis of the Brake Disc in SolidWorks. Manufacturing Technology. 2024;24(4):588-593. doi: 10.21062/mft.2024.061.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. MARRI, S.K., HU, J. (2017). Study on Transient Thermal Analysis of a Disc Brake During Braking and Re-leasing Periods. At: University of Massachusetts Lowell, Lowell, MA.
    2. DAKHIL, M., RAI, A.K., REDDY, P., JABBAR, A. (2014). Design and Structural Analysis of Disc Brake in Automobiles. International Journal of Mechanical and Production Engineering Research and Development, Vol. 4, Issue 1, pp. 95-112.
    3. SURBLYS, V., SOKOLOVSKIJ, E. (2016). Research of the Vehicle Brake Testing Efficiency. Procedia Engineering. Vol. 134, pp.452-458. Go to original source...
    4. KANADE, R., MANKAR, R.L. (2017). Material Selection Procedure for Disc Brake Rotor. International Journal for Scientific Research & Development, Vol. 5, Issue 4, ISSN (online): 2321-774X.
    5. PANDIT, K., SHELAR, A., MALAYE, S., DHUMAWAT, P., THAKUR, CH. (2021). Thermal Analysis of FSAE Brake Disc. International Research Journal of Engineering and Technology. Vol. 8, Issue 1, www.irjet.net, p-ISSN: 2395-0056.
    6. MANJUNATH, T.V., SURESH P. M. (2013). Structural and Thermal Analysis of Rotor Disc of Disc Brake, International Journal of Innovative Research in Science Engineering and Technology. Vol. 2, Issue 12, pp. 7741-7749.
    7. JUTRAS, I. (2012). FEA Static Thermal Stress Analysis Tutorial Solidworks Education Blog. Dassault Systemes.
    8. SATOPE, S., BOTE, A. (2017). Thermal analysis of disc brake. International Journal for Innovative Research in Science & Technology. Volume 3, Issue 12.
    9. NAVEED, N., ALFADHI, M. (2019) Design and Analysis of a Disc Brake Rotor for Optimal Perfor-mance in Racing. World Journal of Modelling and Simulation. ISSN 1746-7233.
    10. KUMAR, A. (2021) Thermal analysis of disc brake rotor using Solidworks International Journal of Sci-ence. Technology and Management (IJSTM). Vol. 8, Issue 2, ISSN (online): 2321-774X.
    11. KVASNOVÁ, P., NOVÁK, D., NOVÁK, V., ĎURIŠ, M. (2023). Computer Simulation of Heating Cycle of Aluminum Alloys Using Friction Stir Welding Technology. Manufacturing Technology, Vol. 23(1), pp. 47-52, DOI: 10.21062/mft.2023.014 Go to original source...
    12. ZHENG, B., WANG, X., ZHANG, J. (2021). Structure Optimization Design for Brake Drum Based on Response Surface Methodology. Manufacturing Technology 2021, Vol. 21(3), pp. 413-420, DOI: 10.21062/mft.2021.045 Go to original source...
    13. SEGLA, S., ROY, S. (2020). Dynamic Simulation Analysis of a Motorcycle Suspension System - Assessment of Comfort. Manufacturing Technology 2020, Vol. 20(3), pp. 373-377, DOI: 10.21062/mft.2020.052 Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content