Manufacturing Technology 2024, 24(4):692-699 | DOI: 10.21062/mft.2024.067
Linear Motor System Identification and Simulation Experiments Based on LabVIEW
- 1 Hubei Key Laboratory of Intelligent Convey Technology and Device, Hubei Polytechnic University, 16Guilin Rd. (N), Huangshi, Hubei, China; School of Mechanical and Electrical Engineering, Hubei Polytechnic University, 16Guilin Rd. (N), Huangshi, Hubei, China
- 2 School of Mechanical and Electrical Engineering, Hubei Polytechnic University, 16Guilin Rd. (N), Huangshi, Hubei, China
There are currently many control methods for linear motors, and the focus of controlling the motor should be different for different application needs. In general applications, simple PID control can meet the application requirements, but in precision motion situations with high requirements for motion accuracy, response speed, and stability, PID control is often difficult to achieve satisfactory control results, which requires the application of more advanced control strategies to complete. At present, combining multiple control algorithms and concentrating the advantages of each algorithm while trying to overcome each other's disadvantages has become a major trend in the development of motor control theory. High speed, high efficiency, high precision become the development direction of the current numerical control equipment, linear motor because of its unique performance, now widely used in a variety of precision positioning occasions. Aiming at the requirements of high speed response and high precision of linear motor, the linear motor system is designed based on LabVIEW software and NI acquisition card, including hardware composition and software algorithm. In the LabVIEW simulation environment and the actual control system, the conventional PID algorithm and fuzzy PID algorithm are used to control, and the control results are compared. The experimental results show that compared with the PID control, the fuzzy PID algorithm has obvious advantages in improving the control accuracy, anti-interference ability, reducing the overshoot and improving the system response speed.
Keywords: Llinear motor, System identification, LabVIEW, Fuzzy PID, Simulation experiment
Grants and funding:
This work was supported by Key Projects of Hubei Provincial Natural Science Joint Innovation Fund (2023AFD002), Young and Middle-Aged Talent Project of Hubei Education Department (Q20214502), The Teaching and Scientific Research Project of Hubei Polytechnic University (2021A06)
Received: March 8, 2024; Revised: June 28, 2024; Accepted: July 10, 2024; Prepublished online: July 10, 2024; Published: September 1, 2024 Show citation
References
- QIN YI, ZHOU YONGPENG, DENG ZHONGHUA, et al. Modern AC servo system. Wuhan: Huazhong University of Technology Press, 2020.
- FU ZIYI, ZHANG HUA. Research on Fuzzy PID Control of Vertical Motion Permanent Magnet Linear Synchronous Motor. Industrial and Mining Automation, 2021, (4): 10-13.
- JAN HWAN KIM. High precision position of linear permanent magnet synehronous motor for surface mount device placement system. Power Conversion Conference, 2022, l(l):37-42.
Go to original source...
- GUO QINGDING. Precision Control Technology of Linear AC Servo System. Beijing: China Machine Press, 2020.
- DENG ZHONGLIANG. Research on High Frequency Response Precision Displacement Linear Motor and Its Control. Chinese Journal of Electrical Engineering, 2019, 19 (2): 41-46.
- SEAMUS GORDON. Development of a high speed CNC cutting machine using linear motors. Materials Processing Technology, 2019166:321-329.
Go to original source...
- FA-JENG LIN. On-line gain tuning using RFNN for linear synehronous motor. Power Electronies Specialists Conference, 2021, 2:766-771.
Go to original source...
- BOWERS R. Scanning Our Past from London Using Yesterday's Engineering Tomorrow: Eric Laithwaite. Proc. IEEE, 2021, 89(2):214-216.
Go to original source...
- SONG SHUZHONG. Development and Application of Linear Motor. Control Engineering, 2016, 03: 199-201+277.
- B. RAISON, F. FRANCOIS, G. ROSTAING, AND J. ROGON, Induction drive monitoring by neural networks, Proc. IEEE Int. Conf. Industrial Electronics, Control Instrumentation, 2020:859-863.
- SHAO XIAOQIANG. Current Situation and Development Direction of Linear Motor. Electrical Technology, 2021, 07:58-60.
- GUILLEMOT F, SOUQUET A, CATROS S, et al. High-throughput laser printing of cells and biomaterials for tissue engineering. Acta Biomater, 2020, 6(7):2494~2500.
Go to original source...
- MA RONGHUA. dSPACE-based PID controller for a linear motor-driven inverted pendulum. Proceedings of International Conference on Mechatronics and Machine Vision in Practice, Xiamen, China, 2019:68-72.
Go to original source...
- THORNTON RICHARD D. Linear synchronous motor design. IEEE Electric Machines and Drives Conference, MA, US, 2019:1555 -1560.
Go to original source...
- SEITZ H, RIEDER W, IRSEN S, et al. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res B Appl Biomater, 2019, 74(2):782~788.
Go to original source...
- DHAOUADI, R. Design and implementation of an extended kalman filter for the state estimation of a PMSM. IEEE Transactions on Power Electronics, 2019, 6(3):491-497.
Go to original source...
- FAN HAIMIN. Linear Motor Control System Based on Smiht Preestimator. Applied Science and Technology, 2021, 29(5):27-29.
- K.YOSHIDA. Deeooupled-control method for levitation and propulsion in amphibious train marine- ex-press. Memories of the faculty of engineering Kyushu University, 2022, vol.55, No.4, PP467-489.
- QUADRANI P, PASINI A, MATTIOLLI-BELMONTE M, et al. High-resolution 3D scaffold model for engineered tissue fabrication using a rapid prototyping technique. Med Biol Eng Comput, 2020, 43(2):196~199.
Go to original source...
- SHI, Y., ZHU, Y. 2023. Research on Viewpoint Planning Method for Multi-view Image 3D Reconstruction. Manufacturing Technology, 23, 532-537.
Go to original source...
- ABIAN, M., HUÒADY, R., KUPEC, F. 2022. Reverse Engineering and Rapid Prototyping in the Process of Developing Prototypes of Automotive Parts. Manufacturing Technology, 22, 669-678.
Go to original source...
- ZHANG DAILIN. Control Strategy and Experimental Research of Permanent Magnet Synchronous Linear Motor Ser-vo System. Huazhong University of Science and Technology, 2019.
- SMITH C M, ROY T D, BHALKIKAR A, et al. Engineering a titanium and polycaprolactone construct for a biocompatible interface between the body and artificial limb. Tissue Eng Part A, 2020, 16(2):717~724.
Go to original source...
- SHAO, S., XING, Y., QU, L., LI, X. 2021. An Automatic Generation Method of Exploded View Based on Projection. Manufacturing Technology, 21, 691-699.
Go to original source...
- NOROTTE C, MARGA F S, NIKLASON L E, et al. Scaffold-free vascular tissue engineering using bioprinting. Biomaterials, 2019, 30(30):5910~5917.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.