Manufacturing Technology 2024, 24(5):817-826 | DOI: 10.21062/mft.2024.078

Effect of Solubility of Alloying Elements on Selected Properties and on the Structure of AlSi5Cu2Mg

Martina Sýkorová ORCID..., Dana Bolibruchová ORCID..., Marek Brůna ORCID..., Mária Chalupová ORCID...
Faculty of Mechanical Engineering, University of Zilina, Univerzitna 8215/1, 010 26 Zilina, Slovakia

The paper deals with the solubility and influence of the melting method of alloying elements (Zr, Mo and Sr) on selected properties and structure of the hypoeutectic aluminum alloy AlSi5Cu2Mg. Alloy-ing elements in the form of master alloys (AlZr20, AlMo10, and AlSr10) were melted in two different methods. The first method consisted in melting the master alloy together with the batch material in an electric resistance furnace, the second method consisted in separately melting the master alloy in an induction electric furnace and then introducing the master alloy into the molten batch. The presence of alloying elements led to an increase in the porosity in all experimental alloys, which negatively affected the resulting physical and mechanical properties.

Keywords: Solubility, AlSi5Cu2Mg, Zirconium, Strontium, Molybdenum
Grants and funding:

This research was created within the project of the grant agency VEGA 1/0160/22 and Grant System of University of Zilina No. 1/2021 (14862). The authors thank for the support.
This article was funded by the University of Žilina project 313011ASY4 „Strategic implementation of additive technologies to strengthen the intervention capacities of emergencies caused by the COVID -19 pandemic“

Received: November 15, 2023; Revised: September 6, 2024; Accepted: October 22, 2024; Prepublished online: November 27, 2024; Published: November 28, 2024  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Sýkorová M, Bolibruchová D, Brůna M, Chalupová M. Effect of Solubility of Alloying Elements on Selected Properties and on the Structure of AlSi5Cu2Mg. Manufacturing Technology. 2024;24(5):817-826. doi: 10.21062/mft.2024.078.
Download citation

References

  1. BENEDYK, J. C. (2010). Aluminium Alloys for Lightweight Automotive Structures. Materials, Design and Manufacturing for Lightweight Vehicles, pp. 79-113. Woodhead Publishing, ISBN 9781845694630 Go to original source...
  2. BOLIBRUCHOVÁ, D., SÝKOROVÁ, M., BRŮNA, M., MATEJKA, M., ŠIRANEC, L. (2023). Effect of Zr Addition on Selected Properties and Microstructure of Aluminum Alloy AlSi5Cu2Mg. International Journal of Metalcasting, Vol. 17, pp. 2598-2611. DOI: 10.1007/s40962-023-01048-z Go to original source...
  3. BOLIBRUCHOVÁ, D., SÝKOROVÁ, M., ŠIRANEC, L. (2023). Vplyv Sr, Zr a Mo na vybrané vlastnosti AlSi5Cu2Mg zliatiny. Technológ, DOI: 10.26552/tech.C.2023.2.8 Go to original source...
  4. SHIN, J., TAEHYEONG, K., DONGEUNG, K., DONGKWON, K., KITAE, K. (2017). Castability and Mechanical Properties of New 7xxx Aluminum Alloys for Automotive Chassis/Body Applications. Journal of Alloys and Compounds, Vol. 698, pp. 577-590. ISSN 0925-8388 Go to original source...
  5. CZERWINSKI, F. (2020). Thermal Stability of Aluminum Alloys. Materials, Vol. 13, No. 15, DOI: 10.3390/ma13153441 Go to original source...
  6. BEROUAL, S., BOUMERZOUG, Z., PAILLARD, P., BORJON-PIRON, Y. (2019). Effect of Heat Treatment and Addition of Small Amounts of Cu and Mg on the Microstructure and Mechanical Properties of Al-Si-Cu and Al-Si-Mg Cast Alloys. Journal of Alloys and Compounds, Vol. 784, pp. 1026-1035. ISSN 0925-8388 Go to original source...
  7. BOLIBRUCHOVÁ, D., PASTIRČÁK, R. (2018). Zlievarenská metalurgia neželezných kovov, EDIS, Žilina. ISBN 978-80-554-1463-8
  8. BARRIRERO, J., ENGSTLER, M., GHAFOOR, N., JONGE, N., ODÉN, M., MUECKLICH, F. (2014). Comparison of Segregation Formed in Unmodified and Sr-modified Al-Si Alloys Studied by Atom Probe Tomography and Transmission Electron Microscopy. Journal of Alloys and Compounds, pp. 410-421. DOI: 10.1016/j.jallcom.2014.05.121 Go to original source...
  9. ZHANG, W., MA, S., WEI, Z., BAI, P. (2019). The Relationship between Residual Amount of Sr and Morphology of Eutectic Si Phase in A356 Alloys. Materials, Vol. 12, No. 19, DOI: 10.3390/ma12193222 Go to original source...
  10. OMRAN, A., ALI, M., KH, M., EZZELDIEN, M. (2018). Effect of Strontium Content on the Mechanical Properties of Hypo and Hyper Al-Si Cast Alloys. Journal of Al-Azhar University Engineering Sector, Vol. 13, No. 49, pp. 1322-1331. ISSN 1687-8418 Go to original source...
  11. LIPIŃSKI, T. (2024). Microstructure and Mechanical Properties AlSi7Mg Alloy with Sr, Al and AlSi7Mg. Manufacturing Technology Journal, Vol. 24, No. 2, pp. 227-234. ISSN 1213-2489 Go to original source...
  12. WANG, F., QIU, D., LIU, Z., TAYLOR, J., EASTON, M., ZHANG, M. (2013). The Grain Refinement Mechanism of Cast Aluminium by Zirconium. Acta Materialia, Vol. 61, No. 15, pp. 5636-5645. ISSN 1359-6454 Go to original source...
  13. MATEJKA, M., BOLIBRUCHOVÁ, D, KAJÁNEK, D. (2023). Evaluation of the Corrosion Resistance of the Al-Si-Cu-Mg Alloy with the Addition of Zirconium. Manufacturing Technology Journal, Vol. 23, No. 6, pp. 861-869. ISSN 1213-2489 Go to original source...
  14. BOLIBRUCHOVÁ, D., KURIŠ, M., MATEJKA, M., KASIŃSKA, J. (2022). Study of the Influence of Zirconium, Titanium and Strontium on the Properties and Microstructure of AlSi7Mg0.3Cu0.5 Alloy. Materials, Vol. 15, DOI: 10.3390/ma15103709 Go to original source...
  15. BEVILAQUA, W., STADTLANDER, A., FROEHLICH, A. (2020). High-temperature Mechanical Properties of Cast Al-Si-Cu-Mg Alloy by Combined Additions of Cerium and Zirconium. Materials Research Express, Vol. 7, No. 2, IOP Publishing. DOI: 10.1088/2053-1591/ab7163 Go to original source...
  16. QIAN, H., ZHU, D., HU, CH., JIANG, X. (2018). Effect of Zr Additive on Microstructure, Mechanical Properties, and Fractography of Al-Si Alloy. Metals, Vol. 8, No. 2, DOI: 10.3390/met8020124 Go to original source...
  17. SIGLI, C. (2004). Zirconium Solubility in Aluminum Alloys. Materials Science Forum, Vol. 28.
  18. RAKHMONOV, J., TIMELLI, G., BONOLLO, F. (2016). The Effect of Transition Elements on High-Temperature Mechanical Properties of Al-Si Foundry Alloys-A Review. Advanced Engineering Materials, Vol. 18, No. 7, pp. 1096-1105. DOI: 10.1002/adem.201500468 Go to original source...
  19. ŠURDOVÁ, Z., KUCHARIKOVÁ, L., TILLOVÁ, E., PASTIEROVIČOVÁ, L., CHALUPOVÁ, M., UHRIČÍK, M., MIKOLAJČÍK, M. (2022). The Influence of Fe Content on Corrosion Resistance of Secondary AlSi7Mg0.3 Cast Alloy with Increased Fe-content. Manufacturing Technology Journal, Vol. 22, No. 5, pp. 598-604. ISSN 1213-2489 Go to original source...
  20. MORRI, A., CESCHINI, L., MESSIERE, S., CERRI, E., TOSCHI, S. (2018). Mo Addition to the A354 (Al-Si-Cu-Mg) Casting Alloy: Effects on Microstructure and Mechanical Properties at Room and High Temperature. Metals, Vol. 8, No. 6, DOI: 10.3390/met8060393 Go to original source...
  21. SZYMCZAK, T., GUMIENNY, G., KLIMEK, L. (2020). Characteristics of Al-Si Alloys with High Melt-ing Point Elements for High Pressure Die Casting. Materials, Vol. 13, No. 21, DOI: 10.3390/ma13214861 Go to original source...
  22. GRIGORIEV, S., MIRONOV, A., KUZNETSOVA, E., PRISTINSKIY, Y., PODRABINNIK, P., PINARGOTE, N., GERSHMAN, I., PERETYAGIN, P., SMIRNOV, A. (2021). Enhancement of the Mechanical and Tribological Properties of Aluminum-Based Alloys Fabricated by SPS and Alloyed with Mo and Cr. Metals, Vol. 11, No. 12, DOI: 10.3390/met11121900 Go to original source...
  23. BRŮNA, M., KUCHARČÍK, L. (2013). Prediction of the Porosity of Al Alloys. Manufacturing Technology Journal, Vol. 13, No. 3, pp. 296-302. ISSN 1213-2489 Go to original source...
  24. BOLIBRUCHOVÁ, D., KURIŠ, M., MATEJKA, M. (2019). Effect of Zr on Selected Properties and Porosity of AlSi9Cu1Mg Alloy for the Purpose of Production of High-precision Castings. Manufacturing technology Journal, Vol. 19, No. 4, pp. 552-558. ISSN 1213-2489 Go to original source...
  25. VANDERSLUIS, E., EMADI, P., ANDILAB, B., RAVINDRAN, C. (2020) The Role of Silicon Morphol-ogy in the Electrical Conductivity and Mechanical Properties of As-Cast B319 Aluminum Alloy. Metallurgical and Materials Transactions A, pp. 1874-1886. DOI: 10.1007/s11661-020-05650-2 Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.