Manufacturing Technology 2024, 24(5):721-730 | DOI: 10.21062/mft.2024.081
Possibilities of Analyzing Sources of Impurities in Hydraulic Oil
- Faculty of Special Technology, Alexander Dubcek University of Trenčín, Ku Kyselke 469, 911 06 Trenčín, Slovakia
The task of comprehensive machine care, monitoring of reliability and maintenance is currently a priority not to wait for a malfunction, but to prevent malfunctions before they occur. In the possibilities of mod-ern diagnostic tools, this activity is the task of oil analysis, which is a highly effective tool for monitoring the condition of hydraulic oils during their long-term operation. It is possible to prevent the failure of the entire system by regular monitoring of the technical condition of oils based on the analysis of hydraulic oil pollution. Oil analysis can reveal the amount of additive elements, oil pollution, the amount of addi-tives and changes in the physico-chemical parameters of the oil. In order to determine the current state of the oil filling, it is necessary to use a suitable diagnostic method. The submitted contribution de-scribes an experiment aimed at evaluating the state of hydraulic oil by means of EDX (Energy-dispersive X-ray spectroscopy) analysis, DSC (Different Scanning Calorimetry) analysis and infrared spectroscopy.
Keywords: EDX analysis, Reliability, Oil pollution, Additives, Infrared spectroscopy
Received: May 22, 2024; Revised: September 4, 2024; Accepted: October 22, 2024; Prepublished online: November 27, 2024; Published: November 28, 2024 Show citation
References
- ILINA, O. A., MIKOSIANCHYK, O. O., YASHCHUK, O. P., MNATSAKANOV, R. H., BEREZIVSKYI, N. M. (2023). Tribomonitoring of the quality of aviation hydraulic oils according to lubricity and rheological indicators. In: Problems of Tribology, Vol. 28, No. 1/107, pp. 34-40.
Go to original source...
- STANCEKOVA, D., MRÁZIK, J., ŤAVODOVÁ, M., SAPIETOVÁ, A., RUDAWSKA, A., TURIAN, F. (2022). Testing the Effect of Bending Moment on Wheel Bearing Heating. In: Manufacturing Technology, Vol. 22, No. 1, pp. 71-79.
Go to original source...
- LICEK, R. 2017. Evaluation of Tribological Properties by Using Different Process Fluid by Test Ball on Disc. in: Manufacturing Technology, Vol. 17, pp. 217-223.
Go to original source...
- PABSETTI, P., MURTY, R. S. V. N., BHOJE, J., MATHEW, S., RAHUL, K., FEROSKHAN, M. (2023). Performance of hydraulic oils and its additives in fluid power system: A review. In: IOP Conference Series: Earth and Environmental Science, Vol. 1161, No. 1, p. 012009. IOP Publishing.
Go to original source...
- ŠVEC, M., NOVÁKOVÁ, I., SOLFRONK, P. (2023). Determination of the Effect of Deformation on the Corrosion Resistance of Zn-Al-Mg Coated Sheets. In: Manufacturing Technology, Vol. 23, No. 5, pp. 709-16.
Go to original source...
- HUA, Z., LEI, Z., HUA, C. (2019). Research on Hydraulic System Optimization of Loader Based on GA-BP. In: Manufacturing Technology, Vol. 19, pp. 952-958.
Go to original source...
- POPOV, A., KHRAMENKOV, M. (2019). Effect of Hydraulic Oil Entering the Cutting Fluid on the Tool Life and Roughness in Milling of Structural Steel. In: Manufacturing Technology, Vol. 19, pp. 482-486.
Go to original source...
- SCIMECA, M., BISCHETTI, S., LAMSIRA, H. K., BONFIGLIO, R., BONANNO, E. (2018). Energy Dispersive X-ray (EDX) microanalysis: A powerful tool in biomedical research and diagnosis. In: European journal of histochemistry: EJH, Vol. 62, No. 1.
Go to original source...
- PIROZZI, N. M., KUIPERS, J., GIEPMANS, B. N. (2021). Sample preparation for energy dispersive X-ray imaging of biological tissues. In: Methods in Cell Biology, Vol. 162, pp. 89-114.
Go to original source...
- KOVÁČIKOVÁ, P., DUBEC, A., KURICOVÁ, J. (2021). The Microstructural Study of a Damaged Motor-cycle Gear Wheel. In: Manufacturing Technology, Vol. 21, No. 1, pp. 83-90.
Go to original source...
- MENEZES, P. L., NOSONOVSKY, M., LOVELL, M. R., INGOLE, S., KAILAS, S. V. (2013). Tribology for Scientists and Engineers: From Basics to Advanced Concepts. 959 p. Springer, New York. ISBN 978-1461419440.
Go to original source...
- PINHEIRO, C. T., RENDALL, R., QUINA, M. J., REIS, M. S., & GANDO-FERREIRA, L. M. (2017). Assessment and prediction of lubricant oil properties using infrared spectroscopy and advanced predictive analytics. In: Energy & Fuels, Vol. 31, No. 1. pp. 179-187.
Go to original source...
- DOYLE, A., SAAVEDRA, A., TRISTÃO, M. L. B., AUCELIO, R. Q. (2015). Determination of S, Ca, Fe, Ni and V in crude oil by energy dispersive X-ray fluorescence spectrometry using direct sampling on paper substrate. In: Fuel, Vol. 162, pp. 39-46.
Go to original source...
- DUYCK, C., MIEKELEY, N., DA SILVEIRA, C. L. P., AUCELIO, R. Q., CAMPOS, R. C., GRINBERG, P., BRANDAO, G. P. (2007). The determination of trace elements in crude oil and its heavy fractions by atomic spectrometry. In: Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 62, No. 9, pp. 939-951.
Go to original source...
- ABD MUTALIB, M., RAHMAN, M. A., OTHMAN, M. H. D., ISMAIL, A. F., JAAFAR, J. (2017). Scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) spectroscopy. In: Membrane characterization, pp. 161-179. Elsevier.
Go to original source...
- PATSCHULL, J., ROTH, P. (1995). Measurement and reduction of particles emitted from a two-stroke en-gine. In: Journal of aerosol science, Vol. 26, No. 6, pp. 979-987.
Go to original source...
- KOVACS, A., OLAGOS, D. (1990). Synthetic two-stroke engine oil as a tool of exhaust emission control. In: Journal of Synthetic Lubrication, Vol. 7, No. 1, pp. 47-55.
Go to original source...
- DOS SANTOS, W. N., MUMMERY, P., WALLWORK, A. (2005). Thermal diffusivity of polymers by the laser flash technique. In: Polymer testing, Vol. 24, No. 5, pp. 628-634.
Go to original source...
- ABDULAGATOV, I. M., ABDULAGATOVA, Z. Z., KALLAEV, S. N., BAKMAEV, A. G., OMAROV, Z. M. (2020). Heat capacity and thermal diffusivity of heavy oil saturated rock materials at high temperatures. In: Journal of Thermal Analysis and Calorimetry, Vol. 142, No. 1, pp. 519-534.
Go to original source...
- WOLAK, A., MOLENDA, J., ZAJĄC, G., JANOCHA, P. (2021). Identifying and modelling changes in chemical properties of engine oils by use of infrared spectroscopy. In: Measurement, Vol. 186, 110141.
Go to original source...
- NG, E. P., MINTOVA, S. (2011). Quantitative moisture measurements in lubricating oils by FTIR spectroscopy combined with solvent extraction approach. In: Microchemical Journal, Vol. 98, No. 2, pp. 177-185.
Go to original source...
- BALABIN, R. M., SAFIEVA, R. Z. (2008). Motor oil classification by base stock and viscosity based on near infrared (NIR) spectroscopy data. In: Fuel, Vol. 87, No. 12, pp. 2745-2752.
Go to original source...
- BALABIN, R. M., SAFIEVA, R. Z., LOMAKINA, E. I. (2011). Near-infrared (NIR) spectroscopy for motor oil classification: From discriminant analysis to support vector machines. In: Microchemical Journal, Vol. 98, No. 1, pp. 121-128.
Go to original source...
- KORNEEV, S. V., ZHIGADLO, A. P., BAKULINA, V. D., PASHUKEVICH, S. V. (2023). Evaluation of changes in the characteristics of motor oils on the Fourier infrared spectrometer. In: AIP Conference Proceedings, Vol. 2784, No. 1. AIP Publishing.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.