Manufacturing Technology 2025, 25(1):103-112 | DOI: 10.21062/mft.2025.010
Optimization of Titanium Surface for Live Cells
- Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 16607, Prague 6. Czech Republic
The present paper is focused on the study of the characteristics of selected titanium alloys before and after heat treatment. The specimens were cooled both in water and liquid nitrogen from 900°C and 1000°C for pure titanium and from 1000°C and 1100°C for the Ti-6Al-4V alloy. Further, the paper deals with line MG63 live bone cells deposited on a titanium base substrate. Proliferation and differentiation are monitored of cells during 7-day in vitro cultivation portraying growth of cells on a biologically selected material.
Keywords: Titanium alloys, Live cells, Mechanical properties, Scanning electron microscopy, Heat treatment
Received: March 2, 2024; Revised: March 4, 2025; Accepted: March 7, 2025; Prepublished online: March 27, 2025; Published: April 25, 2025 Show citation
References
- ANISIMOV, E. (2012). Effect of Degradation Processes in Surface Layers of Materials on the Function of a Body Replacement. Dissertation Thesis. CTU in Prague, Prague. (In Czech)
- MICHNA, Š. (2007). Technical Materials II, Děčín. (In Czech)
- MACEK, K., et al. (2006). Metallic Materials, 1st Ed., CTU in Prague, Prague. ISBN 80-01-03513-1 (In Czech)
- SEDLÁČEK, V. (1963). Titanium and Alloys: Production, processing and use, SNTL, Prague. (In Czech)
- JACKSON, M.J., AHMED, W. (2007). Surface Engineered Surgical Tools and Medical Devices. In: Springer, pp. 533-576.
Go to original source...
- HUTZSCHENREUTER, P., BRÜMMER, H. (1980). Screw design and stability In Current concepts of Internal Fixation. In: Springer-Verlag, pp. 244-250.
- OGLEZNEVA, S.A. (2011). Diamond Tools with Metastable Steel Binder for Natural Stone Cutting. In: Journal of Friction and Wear, No. 4, Vol. 32, pp. 313-317. Allerton Press, Inc. ISSN 1068-3666.
Go to original source...
- GAMMON, L.M., et al. (2004). Metallography and Microstructures of Titanium and Its Alloys, Metallography and Microstructures, pp. 899-917. ASM Handbook. Vol. 9. ASM International, Materials Park, ISBN: 0-87170-706-3.
Go to original source...
- WILLIAMS, G., LUTJERING, J.C. (2003). Titanium. In: Springer-Verlag.
- LÜTJERING, G., WILLIAMS J.C., GYSLER, A. (2000). Microstructure and Properties of Materials: Microstructure and Mechanical Properties of Titanium alloys, pp. 1-77. Word Scientific, ISBN 981-02-4180-1.
Go to original source...
- KLUSÁK, O. (2010). The metal biocompatible materials and their use Brno. Bachelor´s thesis, Brno Univer-sity of Technology, Brno. Available at: http://kfe.fjfi.cvut.cz/~sinor/EDU/F7PMIPLB-N/docs/src/bio/biomat/final-thesis.pdf (In Czech)
- JELEN, K., KUBOVY, P., LOPOT, F., FARA, L., JEZDIK, R., HRUSA, F., PURS, H., TIKKANEN, T., NOVAK, M., SVOBODA, M., TOMSOVSKY, L. (2023). Experimental Validation of the Biomechan-ical Response of an Anthropo-morphic Testing Device (Dummy) at Low Impact Velocities. In: Manufacturing Technology, Vol. 23, No. 4, pp. 418-425. J. E. Purkyně University in Ústí nad Labem. Czech Republic. ISSN: 1213-2489. doi: 10.21062/mft.2023.047.
Go to original source...
- VAN, T.N., NAPRSTKOVA, N. (2024). Accuracy of Photogrammetric Models for 3D printed Wrist-hand Orthoses. In: Manufacturing Technology, Vol. 24, No. 3, pp. 458-464. J. E. Purkyně University in Ústí nad Labem. Czech Republic. ISSN: 1213-2489. doi: 10.21062/mft.2024.048.
Go to original source...
- KUSMIERCZAK, S. & SRB, R. (2023). Influence of Thermomechanical Processing Parameters on Selected Properties of B-post Made of 22MnB5 Steel. In: Manufacturing Technology, Vol. 23, No. 6, pp. 837-845. J. E. Purkyně University in Ústí nad Labem. Czech Republic. ISSN: 1213-2489. doi: 10.21062/mft.2023.105.
Go to original source...
- PUCHNIN, M., PEŠLOVÁ, F., KUCHAŘ, J., KREJBICH, V. (2022). Rapid Determination of Changes in Material Properties of Water Turbines Blades. In: Manufacturing Technology, Vol. 22, No. 5, pp. 585-589. J. E. Purkyně University in Ústí nad Labem. Czech Republic. ISSN: 1213-2489. doi: 10.21062/mft.2022.075.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.