Manufacturing Technology 2026, 26(4):480-486 | DOI: 10.21062/mft.2026.039

Effect of 3D printing on Changes in Modulus of Elasticity E Measured by Ultrasound, Bending Test and EBSD

Jana Vesela ORCID..., Petr Beneš ORCID..., David Bricín ORCID...
Research Centre Rez, 301 00 Morseova 4 Plzen, Czech Republic

The use of metal additive manufacturing is becoming an essential tool in industrial production, offer-ing opportunities for rapid innovation and increased efficiency. It is widely applied in prototype fabri-cation and spare‑part manufacturing, where it simplifies production processes, reduces costs, and shortens lead times. This study focuses on evaluating the influence of 3D printing parameters on the elastic modulus E measured in individual printing axes, and its change after thermomechanical post‑processing using Hot Isostatic Pressing (HIP). Elastic moduli were determined non‑destructively using ultrasonic testing and destructively through three‑point bending tests and EBSD (Electron Backscatter Diffraction) analysis.

Keywords: Ultrasound velocity, 3D printing, Elastic modulus E, Three‑point bending test, Elastic stiffness coefficient
Grants and funding:

The presented work has been realized within Institutional Support by Ministry of Industry and Trade of the Czech Republic

Received: March 31, 2026; Revised: July 14, 2026; Accepted: July 17, 2026; Prepublished online: November 16, 2026; Published: November 17, 2026  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Vesela J, Beneš P, Bricín D. Effect of 3D printing on Changes in Modulus of Elasticity E Measured by Ultrasound, Bending Test and EBSD. Manufacturing Technology. 2026;26(4):480-486. doi: 10.21062/mft.2026.039.
Download citation

References

  1. ÁLVARO, B.D.C.J., MARIA HELENA, T. L., MAURÍLIO, J. I, SAMARA, G.R., DEBORA, S.R., GUSTAVO, D. F., VINÍCIUS, M.B.F., JAIRO, A.V.D.O. (2022). Determination of elastic and mechanical properties in CA-50 steel by using ultrasonic waves. International Journal of Advanced Engineering Research, Vol.9, Issue 9, https://dx.doi.org/10.22161/ijaers.99.25. Go to original source...
  2. R. HASAN, A. F. ABU SAMAH, AND Z. SHAMSUDIN, (2024). Comparison of Young's Modulus Determination from Ultrasonic Testing and Three-Point Bending Testing", J. Adv. Res. Appl. Mech., vol. 121, no. 1, pp. 58-65, https://doi.org/10.37934/aram.121.1.5865. Go to original source...
  3. OLYMPUS / Evident, In: Elastic Modulus Measurement. 2002.
  4. NANEKAR, P.P., SHAH, B.K., (2003). Characterization of material properties by ultrasonic. BARC Newsletter, vol. Issue No. 249.
  5. STEPANOV, S.I., ZORINA, M.A., SATSKII, D.D., KARABANALOV, M.S., PUZANOV, M.P., LOGINOV, Y.N., LOBANOV, M.L. (2026). Estimation of elastic modulus anisotropy in grain-oriented electrical steel using EBSD and DMA methods. Lett. Mater., 16(1) 71-77, https://doi.org/10.48612/letters/2026-1-71-77. Go to original source...
  6. LEDBETTER, H.M., (1984). Monocrystal-polycrystal elastic constants of a stainless steel, Physica Status Solidi (a), 85(1), pp. 89-96. doi:10.1002/pssa.2210850111. Go to original source...
  7. SHAWISH, E.S. et al. (2021) 'IA single grain boundary parameter to characterize normal stress fluctuations in materials with elastic cubic grains', European Journal of Mechanics- A/Solids. Go to original source...
  8. BODA, R., PANDA, B., KUMAR, S. (2024) 'Bioinspired design of isotropic lattices with tunable and controllable anisotropy', Advanced Engineering Materials [Preprint]. doi:10.1002/adem.202401881. Go to original source...
  9. TEKLU, A. et al., (2004). Single-Crystal Elastic Constants of Fe-15Ni-15Cr alloy, Metallurgical and Materials Transactions A, 35(10), pp. 3149-3154. doi:10.1007/s11661-004-0059-y. Go to original source...
  10. VESELÁ, J., P. BENEŠ and D. BRICÍN. Effect of Thermal Ageing on Changes in Modulus of Elasticity E Measured by Ultrasound, Bending Test and EBSD. Manufacturing Technology. 2025, Vol. 25, No. 3. DOI: 10.21062/mft.2025.038. Go to original source...
  11. HÜRLOVÁ, Hana a Dalibor VOJTĚCH. Microstructure and Mechanical Properties of Biomedical Co-Cr-Mo Alloy Produced by Precision Casting and 3D Printing Technologies. Manufacturing Technology. 2026, 26(2), 1-8. DOI: 10.21062/mft.2026.013. Go to original source...
  12. CHLUPOVÁ, Alice, Jakub POLOPRUDSKÝ, Michal JAMBOR, Jaromír BRŮŽA, Ladislav POCZKLÁN a Jiří MAN. Heat Treatment-Induced Microstructural Changes in Selectively Laser Melted AlSi10Mg Alloy. Manufacturing Technology. 2025, 25(6). DOI: 10.21062/mft.2025.077. Go to original source...
  13. SIREGAR, I. et al. Milling Performance of Selective Laser Melted Ti6Al4V: A Taguchi Approach for Surface Roughness Optimization. Manufacturing Technology. 2025. DOI: 10.21062/mft.2025.030. Go to original source...
  14. CZAN, A. et al. Analysis of the Basic Characteristics of the Working Accuracy of the Atomic Diffusion Additive Manufacturing ADAM Process by Comparison with the Selective Laser Melting SLM Process. Manufacturing Technology. 2024. DOI: 10.21062/mft.2024.015. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.