Manufacturing Technology 2026, 26(4):438-445 | DOI: 10.21062/mft.2026.040

Experimental Verification of the Effect of Fuel Additives on the Wear of Common Rail Pumps

Pavol Mikuš ORCID..., Alena Breznická ORCID..., Lucia Kakošová ORCID..., Jozef Jaroslav Fekiač ORCID..., Marcel Kohutiar ORCID..., Maroš Eckert ORCID..., Michal Krbaťa ORCID...
Faculty of Special Technology, Alexander Dubcek University of Trenčín, Ku Kyselke 469, 911 06 Trenčín, Slovakia

The article addresses the issue of failures of high-pressure fuel pumps in Common Rail systems and evaluates the influence of fuel additives on their wear. The first part discusses the operating principle of the Common Rail system, the design of high-pressure fuel pumps, and the most common failure modes occurring during their operation. The experimental section focuses on the disassembly and visual analysis of a damaged pump, as well as on the experimental verification of the effects of summer and winter fuel additives in various ratios with diesel fuel. Tribological properties were evaluated using laboratory measurements, supplemented by non-destructive spectral material analysis and hardness testing. The results indicate a significant effect of fuel additives on reducing friction and wear of selected pump components, which may contribute to increased service life and operational reliability.

Keywords: Fuel, Wear, Injection, Tribology, Pump

Received: January 30, 2026; Revised: June 15, 2026; Accepted: September 2, 2026; Prepublished online: November 16, 2026; Published: November 17, 2026  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Mikuš P, Breznická A, Kakošová L, Fekiač JJ, Kohutiar M, Eckert M, Krbaťa M. Experimental Verification of the Effect of Fuel Additives on the Wear of Common Rail Pumps. Manufacturing Technology. 2026;26(4):438-445. doi: 10.21062/mft.2026.040.
Download citation

References

  1. GRITSUK, I. V.; EY, E. Z.; BULGAKOV, N.; GOLOVAN, A.; KURIC, I.; MATEICHYK, V.; POHORLETSKYI, D. (2018). The complex application of monitoring and express diagnosing for searching failures on common rail system units. In: SAE Technical Papers, No. 2018-01-1773. DOI: https://doi.org/10.4271/2018-01-1773 Go to original source...
  2. CHEN, H.; SU, X.; HE, J.; XIE, B. (2019). Investigation on combustion and emission characteristics of a common rail diesel engine fueled with diesel/n-pentanol/methanol blends. In: Energy, Vol. 167, p. 297-311. DOI: https://doi.org/10.1016/j.energy.2018.10.154 Go to original source...
  3. MIKUŠ, P.; BREZNICKÁ, A.; KOHUTIAR, M.; KRBAŤA, M.; JUS, M.; KAKOŠOVÁ, L.; FEKIAČ, J. (2025). Experimental Investigation of the Effect of Fuel on Engine Oil Life. In: Manufacturing Technology, Vol. 25, No. 5, p. 655-661. DOI: https://doi.org/10.21062/mft.2025.068 Go to original source...
  4. MIKUŠ, P.; BREZNICKÁ, A. (2023). Use of tribodiagnostics in practice. In: Reliability: Theory & Applications, Vol. 18, No. 2 (73), p. 340-347. DOI: https://doi.org/10.24412/1932-2321-2023-273-340-347 Go to original source...
  5. BREZNICKÁ, A.; MIKUŠ, P.; TIMÁROVÁ, Ľ.; JUS, M. (2025). Monitoring the Soft Sludge and Water Content of Hydraulic Oil Samples Using Drop Analysis. In: Key Engineering Materials, Vol. 1016, p. 73-84. DOI: https://doi.org/10.4028/p-ehzt7g Go to original source...
  6. SUNDUS, F.; FAZAL, M. A.; MASJUKI, H. H. (2017). Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties. In: Renewable and Sustainable Energy Reviews, Vol. 70, p. 399-412. DOI: https://doi.org/10.1016/j.rser.2016.11.217 Go to original source...
  7. LOO, D. L.; TEOH, Y. H.; HOW, H. G.; LE, T. D.; NGUYEN, H. T.; RASHID, T.; SHER, F. (2023). Effect of nanoparticles additives on tribological behaviour of advanced biofuels. In: Fuel, Vol. 334, p. 126798. DOI: https://doi.org/10.1016/j.fuel.2022.126798 Go to original source...
  8. XU, W.; ZHAO, X.; SHI, H.; HUANG, L. (2025). Study on Trapped Oil and Cavitation of Jet Fuel Gear Pump. In: Manufacturing Technology, Vol. 25, No. 1, p. 131-142. https://doi.org/10.21062/mft.2025.005 Go to original source...
  9. HOLUBEK, M.; PEXA, M.; PAVLU, J.; CEDÍK, J.; VESELA, K.; KUCHAR, P. (2019). Analysis of the Influence of Fuel on Oil Charge and Engine Wear. In: Manufacturing Technology, Vol. 19, No. 1, p. 64-70. https://doi.org/10.21062/ujep/245.2019/a/1213-2489/MT/19/1/64 Go to original source...
  10. LIČEK, R., et al. (2017). Evaluation of Tribological Properties by Using Different Process Fluid by Test Ball on Disc. In: Manufacturing Technology, Vol.17, No.2, p. 217-223. https://doi.org/10.21062/ujep/x.2017/a/1213-2489/MT/17/2/217 Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.