Manufacturing Technology 2012, 12(1):18-21 | DOI: 10.21062/ujep/x.2012/a/1213-2489/MT/12/1/18

Experimental verification of abrasive mass flow impact on the technological head acceleration amplitude and vibrations frequency in the production system with AWJ technology

Fabian Stanislav, Salokyová Štefánia
Institute of Faculty of Manufacturing Technologies, The Technical University of Košice, Bayerova 1, 080 01 Prešov, Slovak Republic

During the operation of manufacturing systems with hydroabrasive jet technology, arising in the production system vibrations, which affeon ct its reliability and durability, operating costs and consequently economic efficiency and operational safety. The emergence and spread of vibrations generated by water jet technology remains actual and theoretically difficult issue, which is currently not sufficiently developed. Despite the best efforts of researchers and a good knowledge of the operation in PS with water jet technology remains unexplained facts. One of them is the abrasive mass flow technological parameter affecting the acceleration amplitude and vibrations frequency on technological head, which is the subject of experimental investigation during cutting steel abrasion resistant HARDOX 500.

Keywords: hydroabrasive water jet, technological head, vibration acceleration amplitude, frequency, cutting of material

Published: June 1, 2012  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Fabian S, Salokyová Š. Experimental verification of abrasive mass flow impact on the technological head acceleration amplitude and vibrations frequency in the production system with AWJ technology. Manufacturing Technology. 2012;12(1):18-21. doi: 10.21062/ujep/x.2012/a/1213-2489/MT/12/1/18.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BIČEJOVÁ, Ľ. - FABIAN, S.: Influence of fineness abrasive and cutting speed change on vibrations formation at cutting using AWJ technology, Scientific Papers, 2009, s. 88 - 93. ISSN 978-3-9802659-8-0
    2. FABIAN, S., KRENICKÝ T.: Vibrodiagnostika výrobných systémov s technológiou AWJ. In.: Spravodaj ATD SR, 2008, pp. 26 - 27, ISSN 1337-8252
    3. FABIAN, S., SALOKYOVÁ, Š.: Research and analysis of a cut material sort influence on vibrations of a technological head at cutting by technology AWJ. 2010. In: Scientific Papers: operation and diagnostics of machines and production systems operational states: vol. 3. - Lüdenscheid : RAM-Verlag, 2010 P. 99-103. - ISBN 978-3-942303-04-0
    4. FABIAN, S., STRAKA, Ľ.: Prevádzka výrobných systémov, In.: Vydavateľstvo Michala Vaška. Prešov, Prešov 2008, s. 251, ISBN 978-80-8073-989-8
    5. FEDÁK, M., FABIAN, S.: An example of theoretical knowledge application in the vibrodiagnostical laboratory, In: Výrobné inžninierstvo, roč.6, no.3, 2007, p.75-78, ISSN 1335-7972
    6. HOLEŠOVSKÝ, F., HRALA, M.: Effect of the Abrasive Grains on the Grinding Power and Surface Quality. In.: Manufactruing Technology. 2011. pp. 56 - 59. ISSN 1213-2489
    7. JACKO, P., KRENICKÝ, T., SALOKYOVÁ, Š., RIMÁR, M.: Zisťovanie vibrácií technologickej hlavice v procese rezania vodným prúdom. 2011. In.: Strojárstvo extra. č. 5 (2011), s. 46/1-46/3. - ISSN 1335 - 2938
    8. KREIDL, M., ŠMÍDL, R.: Technická diagnostika - senzory, metódy, analýza signálu. In.: Ben Praha. 2006. s. 406. ISBN 80-7300-158-6
    9. MÁDL, J., KOUTNÝ, V., RÁZEK, V., FALTUS, J.: Experimentální analýzy procesu přetváření materiálu pri obrábění. In.: Manufactruing Technology. 2011. pp. 13-20. ISSN 1213-2489
    10. MULLER M., VALÁŠEK P.: Interaction of steel surface treatment by means of abrasive cloth and adhesive bond strength. In.: Manufactruing Technology. 2011. pp. 49 - 57. ISSN 1213-2489 Go to original source...
    11. SALOKYOVÁ, Š., FABIAN, S.: The influence of abrasive mass flow on vibrations in the water jet cutting process. 2011. In.: Výrobné inžiniersvto. Roč.10, č. 1 (2011), s. 31 - 34. ISSN 1335-7972
    12. SALOKYOVÁ, Š.: Návrh metód a technických systémov (hardvér a softvér) pre elimináciu vibrácií a hlučnosti s aplikáciou na výrobné systémy s vybranými druhmi technológie. Písomný materiál k dizertačnej práci. 08.04.2011. Prešov. 2011
    13. ŤAVODOVÁ M.:Evaluation of roughness of the AIMg3 cut surface after abrasive water jet processing. In.: Manufactruing Technology. 2011. pp. 42 - 48. ISSN 1213-2489

    Return to the content