Manufacturing Technology 2013, 13(2):173-178 | DOI: 10.21062/ujep/x.2013/a/1213-2489/MT/13/2/173

The GIST of Thermal Stresses of Cast Iron Castings

Peter Futáš1, Imrich Jelč2, Iveta Vasková1, Gabriel Fedorko3, Vieroslav Molnár3, Peter Kačmáry3
1 Department of Ferrous and Foundry Metallurgy, Faculty of Metallurgy, Technical University of Košice, Park Komenského 14, Košice, 040 01, Slovakia
2 IT TRADING, s.r.o., Expertises of the department of metallurgy, smelting and casting metals, Kysucká 14, Košice, 04001, Slovakia
3 Logistic institute of industry and transport, Faculty BERG, Technical University of Košice, Park Komenského 14, Košice, 040 01, Slovakia

This paper deals with problems concerning to the lifetime of thermal-stressed castings used in general practice. It is necessary to know in details the purport of thermal-stress of cast iron as well as conditions of the thermal-stress (the level of operational temperature, or its fluctuations, i.e. thermal duty cycle) for the right choice of chemical composition and structure (macro and micro) of a material. The successful solution of this problem is now provided by means of computer (simulation programs), including optimization of construction of components (castings). It requires comprehensive theoretical analysis of the purport of the thermal stress i.e. impact of various physical parameters to its origin, course and size.

Keywords: cast iron, heat stress

Published: June 1, 2013  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Futáš P, Jelč I, Vasková I, Fedorko G, Molnár V, Kačmáry P. The GIST of Thermal Stresses of Cast Iron Castings. Manufacturing Technology. 2013;13(2):173-178. doi: 10.21062/ujep/x.2013/a/1213-2489/MT/13/2/173.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. LICKFETT, H. (2012). Gussproduktion 2010 - globale Trends. In: Giesserei 99, Vol. 2012, No. 4, pp. 154 - 157, ISSN: 0016-9765. Go to original source...
    2. ANWAR, M. Y. (2006). A study on thermal cracking of cast iron. In: 70th Annual Session Proceedings, Pakistan Engineering Congress, pp. 414 - 422. http://pecongress.org.pk/images/upload/books/Paper677.pdf
    3. MOONESAN, M., HONARBAKHSH RAOUF, A., MADAH, F., HABIBOLLAH ZADEH, A. (2012). Effect of alloying elements on thermal shock resistance of gray cast iron. In: Journal of Alloys and Compounds, Vol. 503, pp. 226 - 231, ISSN 0925-8388. Go to original source...
    4. MANESH, A. A. I., SEGERLIND, L. J. (1991). Simulation of heat transfer and stress analysis of continuous casting. In: Archive of Applied Mechanics, Vol. 61, No. 6 - 7, pp. 393 - 403, ISSN: 0939-1533. Go to original source...
    5. MAIJER, D., COCKCROFT, S., JACOT, A. (2000). Modeling of microstructure and residual stress in cast iron calender rolls. In: Metallurgical and Materials Transactions A, Vol. 31, No. 4, pp. 1201 - 1211, ISSN 1073-5623. Go to original source...
    6. L. BUMBÁLEK. Zbytková napětí určovaná pomocí Barkhausenova šumu, Strojírenská technologie a Munufacturing Technology, 2004, 11-15 s.
    7. JELČ, I. (1983). Výroba hutníckych a ťažkých odliatkov. VŠT Košice, 1983, 974 s.
    8. GEDEONOVÁ, Z., JELČ, I. (2000). Metalurgia liatin. HF TU Košice, 2000, 288 s.
    9. Magmasoft 4.4: Magmairon Module, Simulation of Microstructural Modeling in Cast Iron, 2005.
    10. KIM, H. S. (2009). Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method. In: Materials Science and Engineering: A. Vol. 503, No. 1-2, pp. 130 - 136, ISSN 0921-5093. Go to original source...
    11. ZEMAN, P., MÁDL, J. Simulace doformací v obrobku softwarem AdvantEdge 3.6, Strojírenská technologie a Munufacturing Technology, 2002, 23-27 s
    12. BOŽEK, P., KORŠUNOV, A. I. (2012). Advantages of INS control systems. In: TechMat '12, pp. 1 - 7. http://dspace.upce.cz/bitstream/10195/48767/1/BozekP_AdvantagesOfINS_2012.pdf

    Return to the content