Manufacturing Technology 2014, 14(3):470-474 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/3/470

Analysis of Surface Integrity of Parts after Non Conventional Methods of Machining

Alena Vajdová1, Anna Mičietová1, Miroslav Neslušan1, Kamil Kolařik2
1 Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic
2 ČUVT Praha, Faculty of mechanical Engineering, Trojanova 13, 120 00 Praha 2, Czech Republic

This paper deals with analysis of surface integrity of steel after electro discharge machining (EDM), water jet machining, (WJM) laser beam machining (LBM) and plasma beam machining (PBM). The paper discusses surface integrity expressed in surface roughness, sample precision expressed in perpendicularity deviation as well as stress state. This study also demonstrates influence of the various non conventional methods on structure transformations and reports about sensitivity of the different non conventional methods of machining with regard to variable thickness of machined samples.

Keywords: Equation, Manufacturing Technology, Pictures, Tables, Template

Published: October 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vajdová A, Mičietová A, Neslušan M, Kolařik K. Analysis of Surface Integrity of Parts after Non Conventional Methods of Machining. Manufacturing Technology. 2014;14(3):470-474. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/3/470.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. MIČIETOVÁ, A. (2007). Nekonvenčné metódy obrábania - výber, využitie, perspektívy. EDIS-vydavateľstvo ŽU, Žilina, 2007, ISBN 978-80-8070-775-0, s.72.
    2. MIČIETOVÁ, A., MAŇKOVÁ, I., VELÍŠEK, K. (2007). Top trendy v obrábaní, V. časť - Fyzikálne technológie obrábania. MEDIA/ST, s.r.o., Žilina, 2007, ISBN 80-968954-7-2, 225 s.
    3. MAŇKOVÁ, I. (2000). Progresívne technológie, Vienala - vydavateľstvo, Košice, pp. 275.
    4. MIČIETOVÁ, A., NESLUŠAN, M., ČILLIKOVÁ, M. (2013). Influence of surface geometry and structure after non-convetional methods of parting on the following milling operation, Manufacturing technology, Vol.13, 2013, pp. 199-204 Go to original source...
    5. GANEV, N., ZEMAN, P., KOLAŘÍK, K., BAKALOVÁ, T. (2007). Residual Stresses Distribution in Surface Layer after Milling of Steel, Manufacturing Technology, Vol. 7, 2007, pp. 10 - 18.
    6. LUKOVICS, I., MALACHOVÁ, M. (2007). Use of Laser in Engineering, Manufacturing Technology, Vol. 7, 2007, pp. 26 - 317.
    7. MIČIETOVÁ, A., NESLUŠAN, M., ČILLIKOVÁ, M. (2013). Residual stresses after thermal methods parting, Machines Technologies Materials, Vol. 2, 2013, pp. 235 - 240.
    8. RAJESH, R., DEV ANAND, M. (2012). The optimization of EDM process using response surface methodology and generic algorithms, Procedia Engineering, Vol. 18, 2012, pp. 3941 - 3950. Go to original source...
    9. GARCÍA NAVAS, V. et. all (2008). EDM versus hard turning and grinding - comparison of residual stress and surface integrity generated in AISI O1tool steel, Journal of Material processing Technology, Vol. 195, 2008, pp. 186 - 194. Go to original source...
    10. PARANDOUSH, P. - HOSSAIN, A. (2014). A review of modeling and simulation of laser beam machining, International Journal of Machine Tools and Manufacture, Vol. 85, pp. 135-145. Go to original source...
    11. MEIJER, J. (2004). LBM state of art and new opportunities, Journal of Material Processing Technology, Vol. 149, 2004, pp. 2-17. Go to original source...
    12. ALLEN, D.M. et. all (2009). Ion beam, focused ion beam, and plasma discharge machining, CIRP Annals Vol. 58, 2009, pp. 647-662. Go to original source...
    13. AXINTE, D.A. (2014). HEFJet-machining: From scientific and technological advances to niche industrial applications, CIRP Annals, Vol. 63, 2014, In Press. Go to original source...
    14. JUNKAR, M., JURISEVIC, B., FAJDIGA, M., GRAH, M. (2006). Fine element analysis of single-impact in abrasive water jet machining, International Journal of Impact Engineering, Vol. 32, 2006, pp. 1095-1112. Go to original source...
    15. KRAUS I., GANEV N. (2004). Technické aplikace difrakční analýzy, Vydavatelství ČVUT, Praha 2004, 233 s. ISBN 80-01-03099-7.
    16. KRAUS I., GANEV N. (1995). Difrakční analýza mechanických napětí. 1 vyd., Praha : ČVUT, 1995. 274 s. ISBN 80-01-01366-9.

    Return to the content