Manufacturing Technology 2015, 15(2):119-125 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/2/119

Design of Double-row Magnetic Cycloid Gearbox

Juraj Bezák1, Peter Bezák1, Alena Vajdová2
1 Department of Design and Mechanical Elements, University of ®ilina, Univerzitná 8215/1, 010 26 ®ilina, Slovak Republic
2 Faculty of Mechanical Engineering, University of ®ilina, Univerzitná 8215/1, 010 26 ®ilina, Slovak Republic

The paper deals with the issue of magnetism and its use in mechanical engineering as well as in other industries. Transmission systems are rather frequently present in almost every technical system. The purpose of each transmission system is to transform energy, based on which its quality can be assessed.
The main objective of this paper is the structural design of a magnetic cycloid gearbox, a detailed description of transmission kinematic analysis, elaboration of calculation models for FEM analyses consisting of the analysis of gearing power relations and calculation of maximum torque the gearing is able to transform.

Keywords: magnetic transmission, kinematic equations, stress analysis, gearset, cycloid gearbox

Published: April 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Bezák J, Bezák P, Vajdová A. Design of Double-row Magnetic Cycloid Gearbox. Manufacturing Technology. 2015;15(2):119-125. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/2/119.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. FURLANI, E. (2001). Permanent magnet and electromechanical device. San Diego, CA : Academic Press, 2001. 500 s. ISBN 0-12-269951-3
    2. MORALES, W., FUSARO R. (2003). Permanent magnetic bearing for spacecraft aplications. [online]. 2003. Dostupné na internete: <http://gltrs.grc.nasa.gov/reports/2008/TM-2003-211996-REV1.pdf >. NASA/TM-2003-211996/REV1
    3. BEZÁK, J. (2011). Vývoj bezkontaktných prevodových systémov na báze interakcií magnetických polí : Diplomová práca. ®ilina : ®ilinská univerzita, 2011. 75 s.
    4. Ansys Inc. (2007). Release 11.0 Dokumentation for Ansys. Elektronický manuál k aplikácii Ansys.
    5. HATCH, G. (2010). Recent developments in permanent magnet gear systems and machines. [online]. 2010. Dostupné na internete: <http://www.terramagnetica.com/papers/hatch-permanent-magnet-gears.pdf>.
    6. MÁLIK, L. a kol. (2003). Časti a mechanizmy strojov. ®ilina : EDIS, 2003. 535 s. ISBN 80-8070-043-5.
    7. VAJDOVA, A., a kol. (2014). Analysis of Surface Integrity of Parts after Non-conventional Methods of Machining. Manufacturing Technology, Vol. 14, No. 3 Go to original source...
    8. NOVAK, P., MESKO, J., ZMINDAK, M. (2013). Finite element implementation of Multi-Pass Fillet Weld with Phase Changes. In: Manufacturing Technology, Vol. 13, No.1. Go to original source...

    Return to the content