Manufacturing Technology 2015, 15(3):409-415 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/409

Reaming of Very Precise Holes in Hydrostatic Component

Jan Řehoř1, Jaroslava Fulemová1, Daniel Rut1, Veronika Třísková1, Jan Kutlwašer1, Karel Kouřil2
1 Západočeská univerzita v Plzni, Fakulta Strojní, Univerzitní 8, 306 14 Plzeň. Česká republika
2 HAM-FINAL s.r.o., Vlárská 22, 627 00 Brno. Česká republika

Nowadays, one of the motive trend in engineering industry is transportation and manipulating technology. The hydrostatic mechanisms belong to the most important components and are created by hydraulic engines, pumps, switchgears etc. Inseparable part of hydraulic engine is a servo-valve which coordinates the fluid flow by a microscopic movement of piston. The servo-valve is a casting, usually made of ductile cast-iron that is necessary to machine. The functionality of hydrostatic circuits is influenced significantly by the precise movement of pistons.Therefore it is necessary to provide the dimension accuracy, machining quality and also the geometric shape of holes. This article describes the issue of holes reaming in hydrostatic components with a use of reamers made of sintered carbide and cermet.

Keywords: hydraulic engine, reaming, sintered carbide, cermet

Published: June 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Řehoř J, Fulemová J, Rut D, Třísková V, Kutlwašer J, Kouřil K. Reaming of Very Precise Holes in Hydrostatic Component. Manufacturing Technology. 2015;15(3):409-415. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/409.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. Internal backgrounds of Danfoss Power Solutions a.s. [cit. 2015-01-14]
    2. Hema's Hydraulic Pumps. Diesel Progress [online]. 2013 [cit. 2015-01-14]. Available from http://www.dieselprogress.com/April-2013/Hemas-Hydraulic-Pumps/#.VLZ13S6VOQl.
    3. GALDA, M. The design of hydraulic vehicle of universal driving unit of mowers in Brno: Czech Technical university in Brno, Faculty Mechanic engineering, 2011. p. 44. Tutor of the bachelors thesis Ing. Jan Brandejs, CSc.
    4. FIALA, S., KOUŘIL, K., ŘEHOŘ, J., Reasearch and development of high precise cutting tools of new generation with the use oof inovation technologies and progressive materials. The interim report to the project TA02010236 for 2012, HAM-FINAL s.r.o., Brno, 2012.
    5. ŘEHOŘ, J., KOUŘIL, K., KROFT, L., SKLENIČKA, J. Trendy v konstrukci výstružníků. Strojírenská technologie, 2014, roč. 19, č. 3,4, s. 227-232. ISSN: 1211-4162.
    6. KOUŘIL, K., ČEP, R., JANÁŠEK, A, KŘÍŽ, A., STANČEKOVÁ, D. Surface Integrity at Reaming Operation by MT3 Head.(2012) Manufacturing technology, vol. 14/2, p. 193-199. ISSN: 1213-2489. Go to original source...
    7. KASINA, M., VASILKO, K. Experimental verification of the relation between the surface roughness and the type of used tool coating. (2012) Manufacturing Technology, vol. 12, pp. 27-30. ISSN: 1213-2489. Go to original source...
    8. ČUBAN, J., CALONIUS, O., PIETOLA, M., JERSÁK, J. Fatigue life and surface integrity measurements of EN S355J2 steel used in hydraulic components. (2011) Manufacturing Technology, vol. 11, pp. 5-11. ISSN: 1213-2489. Go to original source...
    9. ULEWICZ, R. Practical application of quality tools in the cast iron foundry. (2014) Manufacturing Technology, vol. 14/1, pp. 104-111. ISSN: 1213-2489. Go to original source...
    10. LEGUTKO, S., KROLCZYK, G., KROLCZYK, J. Quality evaluation of surface layer in highly accurate Manufacturing. (2014) Manufacturing Technology, vol. 14/1, pp. 50-56. ISSN: 1213-2489. Go to original source...

    Return to the content