Manufacturing Technology 2015, 15(4):502-508 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/502

Nanoadditives SiO2 and TiO2 in Process Fluids

Totka Bakalova1, Petr Louda1,2, Lukáš Voleský1, Karolína Borůvková1, Lucie Svobodová1
1 Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic
2 Faculty of Mechanical Engineering, Department of Material Science, Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic

Productivity growth in the machining industry is associated with a reduction in the cost of cleaning and recycling contaminated process fluids. The proper use of process fluids or lubricants can bring a significant reduction in friction and the amount of wear, thereby leading to a reduction in power consumption. The use of nanolubricants in modern technologies is a major advancement. Nanolubricant is a new system composed of nanometer-sized particles dispersed in a base lubricant. The use of nanoadditives in the form of nanoparticles is highly efficient due to their high chemical and biological activity. The doping of lubricants with nanoparticles is one of the ways to solve problems with the removal of bacteria, whereby improving the biological, chemical and technological stability of process fluids. In the article, we monitor the effects of doping process fluids with nanoparticles of silica (SiO2) and titanium dioxide (TiO2) on the friction coefficient of friction pairs of Si3N4 balls against steel 16MnCr5, EN 10084-94 and Si3N4 balls against aluminium AlCu4BiPb balls.

Keywords: nanoadditives, tribology, wear, friction pair, process fluid

Published: September 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Bakalova T, Louda P, Voleský L, Borůvková K, Svobodová L. Nanoadditives SiO2 and TiO2 in Process Fluids. Manufacturing Technology. 2015;15(4):502-508. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/502.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. SIDJANIN, L., KOVAC, P. (1997). Fracture mechanisms in chip formation processes. Mater Sci Technol 13:439-444. Go to original source...
    2. LIEWA, W. Y. H., HUTCHINGS, I. M., WILLIAMS, J. A. (1999). The interaction between tool material, environment, and process conditions in the machining of aluminium alloys. An International Journal Machining Science and Technology 3(2):273-286. Go to original source...
    3. BUMBÁLEK, B. (2003). Integrita povrchu a její význam pro posouzení vhodnosti dané plochy pro její funkci, Vysoké učení technické v Brně, ISBN: 80-214-2436-2, Brno.
    4. MACHADO, A.R., WALLBANK, J. (1997). The effect of extremely low lubricant volumes in machining. Wear 210:76-82. Go to original source...
    5. SAYUTI, M., AHMED, A. D., SARHAN, A. A. D., HAMDI, M. (2013). An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. Int J Adv Manuf Technol. 67:833-849 DOI 10.1007/s00170-012-4527-z. Go to original source...
    6. SAYUTI, M., SARHAN, A.A.D., TOMOHISA T., HAMDI, M., YOSHIO S., (2013c). Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. Int. J. Adv. Manuf. Tech 65 (9-12), 1493-1500. Go to original source...
    7. SHAJI, S., RADHAKRISHNAN, V., (2003). Application of solid lubricants in grinding: investigations on graphite sandwiched grinding wheels. Mach. Sci. Technol. 7, 137-155. Go to original source...
    8. KLOCKE, F., EISENBLÄTTER, G., (1997). Dry cutting. CIRP Ann. Manuf. Technol. 46, 519-526. Go to original source...
    9. PENG, D.X., KANG, Y., HWANG, R.M., SHYR, S.S., CHANG, Y.P. (2009). Tribological properties of diamond and SiO2 nanoparticles added in paraffin. Tribol. Int. 42, 911-917. Go to original source...
    10. MURSHED, S.M.S., LEONG, K.C., YANG, C., (2009). A combined model for the effective thermal conductivity of nanofluids. Appl. Therm. Eng. 29, 2477-2483. Go to original source...
    11. NIKKAM, N., SALEEMI, M., TOPRAK, M. S., MUHAMMED, S. Li, M., HAGHIGHI, E. B., KHODABANDEH, R., PALM, B. (2011). Novel nanofluids based on mesoporous silica for enhanced heat transfer. J Nanopart Res. 13:6201-6206 DOI 10.1007/s11051-011-0404-1. Go to original source...
    12. NAKAMURA, T., TANAKA, S., HAYAKAWA, K., FUKAI, Y., (2000). A study of the lubrication behavior of solid lubricants in the upsetting process. J. Tribol. 122, 803-808. Go to original source...
    13. SIA, S. Y., BASSYONY, E. Z., AHMED A. D. S. (2014). Development of SiO2 nanolubrication system to be used in sliding bearings, Manuf Technol 71:1277-1284. Go to original source...
    14. CHEN, J.. (2010). Tribology properties of Polytetrafluoroethylene, nanotitanium dioxide, and nano-silicon dioxide as additives in mixed oil based titanium complex grease. Tribol Lett 38:217-224. Go to original source...
    15. SARHAN, A. A. D., SAYUTI, M., HAMDI, M.. (2012). Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. Int J Adv Manuf Technol. doi:10.1007/s00170-012-3940-7 Go to original source...
    16. SAYUTI, M. A., SARHAN, A. D., SALEM, F. (2013). Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption. ScienceDirect: Journal of Cleaner Production. p. 1-12. Go to original source...
    17. HOLMEG, K., MATTHEWS, A. (1998). Coating tribology - properties, techniques and applications in surface engineering, Elsevier, Amsterdam.
    18. BURAKOWKI, T., WIERZCHON, T. (1999). Surface engineering of metals, CRC Press LLC, ISNB 0-8493-8225-4, New York.
    19. ROCO, M.C., (1999). Nanoparticles and nanotechnology research. J. Nanoparticle Res. 1(1), 1-6. Go to original source...
    20. XIANG, L., GAO, C., WANG Y., PANA, Z., HU, D. (2014). Tribological and tribochemical properties of magnetite nanoflakes as additives in oil lubricants, Particuology Vol. 17, December 2014, p. 136-144, ISSN: 1674-2001, Longhua. Go to original source...
    21. DEBNATH, S., REDDY M. M., YI, Q. S. (2014). Environmental friendly cutting fluids and cooling techniques in machining, Journal of Cleaner Production 83, p. 33-47, ISSN: 0959-6526. Go to original source...
    22. CHAN, C. Y., LEE, W. B., WANG, H.. (2013). Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning, International Journal of Machine Tools and Manufacture 73, p. 62-70, ISSN: 0890-6955. Go to original source...
    23. BAKALOVA, T., LOUDA, P., VOLESKÝ, L., and KŘIKLAVOVÁ, L. (2014). The impact of natural nanoadditive on the tribological and chemical properties of process fluids. In: Proceedings: 8th International Conference on Tribology, 30thOct.-1stNov.2014. Ploesti: Petroleum-Gas University of Ploiesti Publishing House, p. 143-148. ISBN 978-973-719-570-8, Sinaia, Romania.

    Return to the content