Manufacturing Technology 2015, 15(4):520-526 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/520

Influence of Adhesive Bonded Surface Treatment of Alloy Alcu4mg and Increased Environmental Temperature on Adhesive Bond Strength

Jan Cidlina, Miroslav Müller
Faculty of Engineering, Czech University of Life Sciences Prague. Czech Republic

For the creation of the bond the treatment of the adhesive bonded surface is essential. The second important factor is the temperature of the environment to which the adhesive bond is exposed. It is a way of a degradation of adhesive bonds. The aim of the research was to evaluate the effect of adhesive bonded surface treatment of alloy AlCu4Mg and increased environmental temperature on a strength of adhesive bonds using two-component epoxies used in the transportation industry. As a bonding material AlCu4Mg was used, whose surface was in the first series mechanically and chemically treated. In the second series tested specimens were without the surface treatment. A destructive testing was conducted at a laboratory temperature 22 ± 2 °C and at increased temperatures, i.e. 40, 60 and 80 ± 2 °C. At a mutual comparison of the mechanical treatment and the chemical treatment of the adhesive bonded surface with un-treated surface, the tensile lap-shear strength increased by an average of 57.24 ± 18.52 %. The results show that there is a difference in the tensile lap-shear strength between the test temperatures in the interval 20-80 °C, the decrease was up to 88 %.

Keywords: Adhesive bond, two-component epoxy adhesives, testing

Published: September 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Cidlina J, Müller M. Influence of Adhesive Bonded Surface Treatment of Alloy Alcu4mg and Increased Environmental Temperature on Adhesive Bond Strength. Manufacturing Technology. 2015;15(4):520-526. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/520.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. MÜLLER, M., VALÁ©EK, P. (2012). Degradation medium of agrokomplex - adhesive bonded joints interaction. In: Research in Agricultural Engineering, Vol. 58, pp. 83-91. Go to original source...
    2. MESSLER, R., W. (2004). Joining of materials and structures from pragmatic process to enabling technology. Burlington: Elsevier, 816 pp. Go to original source...
    3. MÜLLER, M. (2013). Research of Liquid Contaminants Influence on Adhesive Bond Strength Applied in Agricultural Machine Construction. In: Agronomy Research, Vol.11, pp. 147-154.
    4. RUDAWSKA, A. (2014). Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joint strength of steel sheets. In: International Journal of Adhesion and Adhesives, Vol. 50, pp. 235-243. Go to original source...
    5. CIDLINA, J., MÜLLER, M., VALÁ©EK, P. (2014). Evaluation of Adhesive Bond Strength Depending on Degradation Type and Time. In: Manufacturing Technology, Vol. 14, No. 1, pp. 8-12. Go to original source...
    6. PAREIRA, A.M., FERREIRA, J.M., ANTUNES, F.V., BARTOLO, P.J. (2010). Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints. In: Journal of Materials Processing Technology, Vol. 210, pp. 610-617. Go to original source...
    7. RAMAZAN, K., MEHMET, S., BEKIR, Y. (2008). Influence of adhesive thickness and filler content on the mechanical performance of aluminium single-lap joints bonded with aluminium powder filled epoxy adhesive. In: Journal of materials processing technology, Vol. 205. pp. 183-189. Go to original source...
    8. VALÁ©EK, P. (2014). Long-term degradation of composites exposed to liquid environments in agriculture. In: Scientia Agriculturae Bohemica, Vol. 3, No. 1, pp.187-192. Go to original source...
    9. MÜLLER, M. (2011). Influence of Surface Integrity on Bonding Process. In: Research in Agricultural Engineering, Vol. 57, pp. 153-162. Go to original source...
    10. ADAMS, R. D., COMYN, J., WAKE, W. C. (1997). Structural adhesive joints in engineering. 2nd ed. Chapman & Hall, London. 360 pp.
    11. HABENICHT, G. (2002). Kleben: Gundlagen, Technologien, Anwendung. Berlin: Springer. 921 pp. Go to original source...
    12. HARRIS, A. F., BEEVERS, A. (1999). The effects of grit-blasting on surface properties for adhesion. In: International Journal of Adhesion & Adhesives, Vol. 19, No. 6, p. 445-452. Go to original source...
    13. SHAHID, M., HASHIM, S. A. (2002). Effect of surface roughness on the strength of cleavage joints. In: International Journal of Adhesion & Adhesives, Vol. 22, No.3, p. 235-244. Go to original source...
    14. GRITCHLOW, G.W., BREWIS, D.M. (1995). Influence of surface macroroughness on the durability of epoxide-aluminium joints. In: International Journal of Adhesion & Adhesives, Vol. 15, No. 3, p. 173-176. Go to original source...
    15. SARGENT, J.P. (1994). Adherend surface morphology and its influence on the peel strength of adhesive joints bonded with modified phenolic and epoxy structural adhesives. In: International Journal of Adhesion & Adhesives, Vol. 14, No. 1, p. 21-30. Go to original source...
    16. NOVÁK, M. (2012). Surfaces with high precision of roughness after grinding. In: Manufacturing technology, Vol. 12, pp. 66-70. Go to original source...
    17. NOVÁK, M. (2011). Surface quality of hardened steels after grinding. In: Manufacturing technology, Vol. 11, pp.55-59. Go to original source...
    18. HRICOVA, J. (2014). Environmentally conscious manufacturing: the effect of metalworking fluid in high speed machining. In: Key engineering materials. Vol. 581, pp. 89-94. Go to original source...
    19. CROCOMBE, A. D. (1997). Durability modelling concepts and tools for the cohesive environmental degradation of bonded structures. In: International Journal of Adhesion & Adhesives, Vol. 17, No. 3, p. 229-238. Go to original source...
    20. KINLOCH, A. J., OSIYEMI, S. O. (1993). Predicting the fatigue life of adhesively-bonded joints. In: Journal of adhesion, Vol. 43, No. 12, p. 79-90. Go to original source...
    21. MÜLLER, M., HERÁK, D. (2013). Application possibilities of adhesive bonds - Europe, Indonesia. In: Scientia Agriculturae Bohemica, Vol. 44, pp. 167-171. Go to original source...
    22. MÜLLER, M., HERÁK, D., VALÁ©EK, P. (2013). Degradation limits of bonding technology depending on destinations Europe, Indonesia. In: Tehnicki Vjesnik-Technical Gazette, Vol. 20, pp. 571-575.
    23. DOBRÁNSKÝ, J., BARON, P., KOÈI©KO, M., BÌHÁLEK, L, VOJNOVÁ, E. (2015). Soloving depressions formed during production of plastic molding. In: Metalurgija, Vol. 54, No. 3, 496-498.
    24. DOBRÁNSKÝ, J., BARON, P., KOÈI©KO, M., VOJNOVÁ, E (2014). Monitoring of the influence of moisture content in thermoplastic granulate on rheological properties of material. In: Applied Mechanics and Materials. Vol. 616, 207-215. Go to original source...
    25. HU, P., HAN, X. LI, W.D., LI, L., SHAO, Q. (2013). Research on the static strength performace of adhesive single lap joints subjected to extreme temperature environment for automotive industry. In: International Journal of Adhesion and Adhesives. Vol. 41, pp. 119-126. Go to original source...
    26. MÜLLER, M., RU®BARSKÝ, J., VALÁ©EK, P. (2014). Degradation process in area of connecting metal sheets by adhesive bonding technology in agrocomplex. In: Applied Mechanics and Materials. Vol. 616, pp. 52-60. Go to original source...
    27. «AVODOVA, M. (2013). The surface quality of materials after cutting by abrasive water jet evaluated by selected methods. In: Manufacturing technology. Vol. 13, pp. 236-241. Go to original source...
    28. PROLONGO, S.C., URENA, A. (2009). Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints. International Journal of Adhesion & Adhesives. Vol. 29, p. 23-31. Go to original source...
    29. BAKER, A.A., CHESTER, R.J. (1992). Minimum surface treatments for adhesively bonded repairs. In: International Journal of Adhesion & Adhesives, Vol. 12, No. 2, p. 73-78. Go to original source...
    30. ELBING, F., ANAGREH, N., DORM, L. UHLMANN, E. (2003). Dry ice blasting as pretreatment of aluminium surfaces to improve the adhesive strength of aluminium bonding joints. In: International Journal of Adhesion & Adhesives, Vol. 23, p. 69-79. Go to original source...
    31. BORSELLINO, C., DI BELLA, G., RUISI, V.F. (2009). Adhesive joining of aluminium AA6082: the effects of resin and surface treatment. In: International Journal of Adhesion & Adhesives, Vol. 29, p. 36-44. Go to original source...
    32. HARRIS, A.F., BEEVERS, A. (1999). The effects of grit-blasting on surface properties for adhesion. In: International Journal of Adhesion & Adhesives, Vol. 19, p. 1445-452. Go to original source...
    33. GRANT, L. D. R., ADAMS, R.D, DA SILVA, L.F.M (2009). Experimental and numerical analysis of single-lap joints for the automotive industry. In: International Journal of Adhesion & Adhesives, Vol. 4, pp. 405-413. Go to original source...

    Return to the content