Manufacturing Technology 2015, 15(4):534-541 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/534

Fractal Geometry Used for Evaluation of Corrosion Resistance of Fe-14Al-6Cr Wt. % against Molten Glass

Adam Hotar1, Vlastimil Hotar2
1 Department of Material Science, Technical University of Liberec, Studentska 2, 461 17 Liberec, Czech Republic
2 Departmet of Glass Producing Machines and Robotics, Technical University of Liberec, Studentska 2, 461 17 Liberec, Czech Republic

Corrosive attack of metals and alloys by molten glass can be described by parameters of surface roughness. Fractal geometry and statistic tools were used for surface roughness quantification. The obtained parameters of fractal geometry and statistics were determined on boundary curves between alloys and glass which had been generated from the digital photography of sample cross-section. This methodology was successfully used for quantification of surface changes of iron aluminides Fe-14Al-6Cr and austenitic steel during corrosion test in molten soda-lime glass at 1200°C.

Keywords: Fractal geometry, corrosion, molten soda-lime glass, iron aluminide, austenitic steel

Published: September 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Hotar A, Hotar V. Fractal Geometry Used for Evaluation of Corrosion Resistance of Fe-14Al-6Cr Wt. % against Molten Glass. Manufacturing Technology. 2015;15(4):534-541. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/534.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. MANDELBROT, B.B. (1982). The fractal geometry of nature, second ed., Freeman WH and Co., New York.
    2. PEITGEN, H. O., JUERGENS, H., SAUPE, D. (1992). Chaos and Fractals: New Frontiers of Science. Springer-Verlag, New York, Berlin, Heidelberg Go to original source...
    3. EVERTSZ, C. J. G., PEITGEN, H. O., VOSS, R. F. (1996). Fractal Geometry and Analysis. World Scientific Publishing Co.Pte. Ltd. Singapore
    4. HILBORN, R. C. (2003). Chaos and Nonlinear Dynamics. New York: Oxford.
    5. GULICK, D. (1992). Encounters with Chaos. McGraw-Hill, Inc.
    6. LEVY, V.J., LUTTON, E., TRICOT, C. (1997). Fractals in Engineering. Springer-Verlag, New York, Berlin, Heidelberg
    7. CONCI, A., PROENCA, C.B. (1998). A fractal image analysis system for fabric inspection based on a box-counting method. In: Computer Networks and Isdn Systems, Vol. 30, pp. 1887-1895. Go to original source...
    8. YU, L., QI, D.W. (2011). Applying multifractal spectrum combined with fractal discrete Brownian motion model to wood defects recognition. In: Wood Science and Technology, Vol. 45, pp. 511-519. Go to original source...
    9. MUGUTHU, J.N., GAO, D. (2013). Profile Fractal Dimension and Dimensional Accuracy Analysis in Machining Metal Matrix Composites (MMCs). In: Materials and Manufacturing Processes, Vol. 28, pp. 1102-1109. Go to original source...
    10. ZHENG, C.X., SUN, D.W., AND ZHENG, L.Y. (2006). Recent applications of image texture for evaluation of food qualities - a review. In: Trends in Food Science & Technology, Vol. 17, pp. 113-128. Go to original source...
    11. HOTAR, V. (2013). Fractal geometry for industrial data evaluation. In: Computers & Mathematics with Applications, Vol. 66, pp. 113-121. Go to original source...
    12. HOTAR, V., NOVOTNY, F., AND REINISCHOVA, H. (2011). Objective evaluation of the corrugation test for sheet glass surfaces. In: Glass Technology-European Journal of Glass Science and Technology Part A, Vol. 52, pp. 197-202.
    13. HOTAŘ, V., NOVOTNÝ, F. (2005). Surface Profile Evaluation by Fractal Dimension and Statistic Tools. In proceedings: 11th International Conference on Fracture. CCI Centro Congressi Internazionale s.r.l., pp. 588, Turin.
    14. HOTAR, V., NOVOTNY, F. (2004). Evaluation of surface defects by fractal geometry and statistical analysis. In: Glass Science and Technology, Vol. 77, pp. 230-237.
    15. HOTAŘ, V., SALAČ, P. (2014) Surface Evaluation by Estimation of Fractal Dimension and Statistical Tools. The Scientific World Journal, vol. 2014, Article ID 435935, 10 pages. Go to original source...
    16. HOTAR, A., KRATOCHVIL, P., AND HOTAR, V. (2009). The corrosion resistance of Fe3Al-based iron aluminides in molten glasses. In Kovove Materialy-Metallic Materials, Vol. 47, pp. 247-252.
    17. HOTAR, A., HOTAR, V., AND NOVOTNY, F. (2014). Corrosion behaviour of Fe-40Al-Zr (at.) alloy in molten soda-lime glass. In: Kovove Materialy-Metallic Materials, Vol: 52, pp. 149-155. Go to original source...
    18. DEEVI, S.C., SIKKA, V.K. (1996). Nickel and iron aluminides: an overview on properties, processing, and applications. In Intermetallics, Vol: 4, pp. 357-375 Go to original source...
    19. ©VEC, M., VODIČKOVÁ, V. (2014). The Effect of Niobium Addition and Heat Treatment on the Phase Structure of Fe3Al - Type Intermetallic Alloys. In Manufacturing Technology, Vol. 14, pp.456 - 461. Go to original source...
    20. ISO 4287 (1997). Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters. International Organization for Standardization, Geneva.

    Return to the content