Manufacturing Technology 2015, 15(4):748-752 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/748

Influence of Chemical Composition in Steel on Laser Cutting Stability

Andrej Zrak, Radoslav Koňár, Peter Jankejech
Faculty of Mechanical Engineering, University of ®ilina, Univerzitná 1, 010 08 ®ilina. Slovak Republic

The translation in this article analyses the technology of laser cutting, describes properties of laser cutting equipment the oxidation process of melting and sublimation laser cutting. In the article chemical composition of cutted material in the interaction with the quality of cutting edges from cut-outs is analysed. The measurement was performed on experimental samples made from steel grade S355 however the composition of chemical elements in each sample varied. On these experimental samples the cutting edges was examined for the purpose to find out the influence of chemical purity of material on the quality of components which were cut by using laser technology.

Keywords: laser cutting, mild steel S355, chemical purity of steel, quality of cutting edge

Published: September 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Zrak A, Koňár R, Jankejech P. Influence of Chemical Composition in Steel on Laser Cutting Stability. Manufacturing Technology. 2015;15(4):748-752. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/748.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. NOVÁK, P., ME©KO, J., ®MINDÁK, M. (2013). Finite element implementation of Multi-Pass Fillet Weld with Phase Changes. In: Manufacturing Technology Vol. 13, No.1. ISSN 1213-2489 Go to original source...
    2. MIČIETOVÁ, M., NESLU©AN, M., ČILLÍKOVÁ, M. (2013). Influence of surface geometry and structure after non-conventional methods of parting on the following milling operations. In: Manufacturing technology, Vol. 13, No. 2, pp. 152-157. ISSN 1213-2489 Go to original source...
    3. DOPJERA, D., MIČIAN, M. (2014) The detection of articullary made defects in welded joint with ultrasonic defectoscopy Phased Array. In: Manufacturing Technology, Vol. 14, No. 1, pp. 12-17, ISSN 1213-2489 Go to original source...
    4. ASHBY M.F., EASTERLING K.E. (1984). The transformation hardening of steel surfaces by laser beams - I. In: Hypo-eutectoid steels. Acta Metall. Vol. 32, No 11, pp. 1935-1948. Go to original source...
    5. RADEK, N., ANTOSZEWSKI, B. (2009) Influence of laser treatment on the properties of electro-spark deposited coatings. In: Kovove Materialy - Metallic Materials 47, pp. 31-38, 2009
    6. ZMINDAK, M., NOVAK, P., ME©KO, J. (2010). Numerical simulation of arc welding processes with metallurgical transformations. Metallurgy, Vol. 49, No.2, pp. 595-599.

    Return to the content