Manufacturing Technology 2015, 15(5):875-881 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/5/875

A 3D Laser Scanner Setup for a Measuring of Geometrical Product Specifications

Pavel Macháček, Rudolf Dvořák
Faculty of Mechanical Engineering Czech Technical University in Prague, Technická 4, 166 07 Prague, Czech Republic

The laser line scanners are coming to be frequently used in a field of dimensional inspection process. There are several phenomena that make the data acquisition more difficult. Particularly secondary reflection, direct reflection, scan overlapping, outlying points. The effect of these phenomena can be minimised by optimal setting of scanning parameters stated in this paper. The parameters were determined from an experimental measurements of 50 various parts. Additionally a thermal stability effect was measured at two types of Nikon scanners. The stabilisation time and the systematic error were determined for the scanner LC15Dx: 45 min, 20μm and 30 min and 37 μm for the LC60Dx scanner. It should help to prevent the systematic errors during the measurement.

Keywords: 3D Scannig, Laser Line Scanner, Dimensional Inspection, Stabilisation interval

Published: November 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Macháček P, Dvořák R. A 3D Laser Scanner Setup for a Measuring of Geometrical Product Specifications. Manufacturing Technology. 2015;15(5):875-881. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/5/875.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. NIOLA, V., ROSSI, C., SAVINO, S., STRANO, S. (2011). A method for the calibration of a 3-D laser scanner In: Robotics and Computer-Integrated Manufacturing, 27 (2), pp. 479-484. Available on <http://www.scopus.com/inward/record.url?eid=2-s2.0-78649319602∂nerID=40&md5=bd7cf5fb5cd5140048957a78f48293ee> Go to original source...
    2. VAN GESTEL, N., CUYPERS, S., BLEYS, P., KRUTH, J. (2009). A performance evaluation test for laser line scanners on CMMs. Optics and Lasers in Engineering [online]. vol. 47, 3-4, s. 336-342 [cit. 2014-03-13]. DOI: 10.1016/j.optlaseng.2008.06.001. Available on http://linkinghub.elsevier.com/retrieve/pii/S0143816608001292 Go to original source...
    3. SCHWENKE, H. et al. (2002). Optical Methods for Dimensional Metrology in Production Engineering, In: CIRP Annals Manufacturing Technology. Volume: 51, Issue: 2, Publisher: Elsevier Go to original source...
    4. Nikon Metrology : DS-LC15Dx-0214 [online]. c2014 [cit. 2014-03-10]. Available on WWW: < www.nikonmetrology.com >.
    5. NOVAK-MARCINCIN, J., TOROK, J., BARNA, J., NOVAKOVA-MARCINCINOVA, L. (2012). Technology of Perspective Scanning Methods for Realization of 3D Models of Manufacturing. Manufacturing Technology. 12(13): 186-191. ISSN 1213-2489. Go to original source...
    6. PODANÝ, J., MOLOTOVNIK, A. (2014). 3D Measurement of Surface Texture Parameters. Manufacturing Technology. 14(4): 596-600. ISSN 1213-2489. Go to original source...

    Return to the content