Manufacturing Technology 2016, 16(2):354-360 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/2/354

Measurement of Noise during the Process of Cutting Materials by Water Jet

Jan Kmec1, Daniel Kucerka1, Miroslav Gombar1, Monika Karkova1, Alena Vagaska2
1 The Institute of Technology and Business in České Budějovice, Czech Republic
2 Technical University of Kosice, Faculty of Manufacturing Technologies, Slovak Republic

Water jet technology material cutting is analyzed from the point of view of environment, namely of an impact of noise to production process working conditions. Except noise, vibrations also influence working environment but this problem in this text is not dealt with. Measuring of noise level was focused on one working shift at a production workplace of a firm WATING Prešov. Two workers were chosen for this puprouse - operators who operate two cutting desks during a common working shift. In accordance of given methodics, measuring microphones were placed on the operators and on selected places of the workplace. The recorded results of measuring were evaluated and consequently steps for noise elimination during water jet cutting process were accepted.

Keywords: Noise at production process, Water jet material cutting, Noise measuring, Noise impact to working environment

Published: April 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kmec J, Kucerka D, Gombar M, Karkova M, Vagaska A. Measurement of Noise during the Process of Cutting Materials by Water Jet. Manufacturing Technology. 2016;16(2):354-360. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/2/354.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BADIDA, M., KMEC, J., SOBOTOVÁ, L., BIČEJOVÁ, Ľ., GOMBÁR, M. (2013). Hydroerosion and Environment. Edition first, Lüdenscheid, Germany : RAM-Verlag. p. 131. ISBN 978-3-942303-20-0.
    2. KMEC, J., KUČERKA, D., GOMBÁR, M., BIČEJOVÁ, Ľ.,SOBOTOVÁ, L., OPEKÁROVÁ, L., STRAKOVÁ, J., VAGASKÁ, A., HRMO, R. (2014). Water Jet for Practice. Edition second, Lüdenscheid, Germany : RAM-Verlag. p. 150. ISBN 978-3-942303-27-9
    3. BIČEJOVÁ, Ľ. (2013). Abrasive kind and granularity changes affects to water jet technology head vibration during cutting HARDOX material thickness alternation process. In: Applied Mechanics and Materials. Vol. 308, p. 75-79. - ISSN 1660-9336. Go to original source...
    4. FABIAN, S., BIČEJOVÁ, Ľ. (2014). Technological head tilt angle influence analysis to generation of vibration during ceramics material machining by means of AWJ. In: Applied Mechanics and Materials. Vol. 616, p. 175-182. - ISSN 1660-9336. Go to original source...
    5. BIČEJOVÁ, Ľ., FABIAN, S. (2014). Analysis of technological head working pressure, tilt angle and shift impact to its vibrations using AWJ. In: Applied Mechanics and Materials. Vol. 616, p. 159-166. - ISSN 1660-9336. Go to original source...
    6. PAVLENKO, S., HAĽKO, J., MAŠČENIK, J., NOVÁKOVÁ, M. (2008). Machine Parts Design with PC Support. - 1. vyd - Prešov : FVT TU, 347 s. - ISBN 978-80-553-0166-2.
    7. MAŠČENIK, J., GAŠPÁR, Š. (2011). Experimental Assessment of Roughness Changes in the Cutting Surface and Microhardness Changes of the Material S 355 J2 G3 after Being Cut by Non-Conventional Technologies In: Advanced Materials Research. Vol. 314-316, p. 1944-1947. - ISSN 1022-6680. Go to original source...
    8. KRENICKÝ, T. (2011). Implementation of Virtual Instrumentation for Machinery Monitoring, in: Scientific Papers: Operation and Diagnostics of Machines and Production Systems Operational States 4, Lüdenscheid, RAM-Verlag, p. 5-8.
    9. HAĽKO, J., PAVLENKO, S. (2013). Design strenght calculation of cycloidal lantern gear. In: BarSU Herald Scientific and practical journal : Physical and Mathematical Sciences : Engineering Sciences. No. 1, p. 58-65. - ISSN 2309-1339.
    10. KRENICKÝ, T., JACKO, P. (2009). Simultaneous temperature monitoring using virtualization, in: Scientific Papers: Operation and diagnostics of machines and production systems operational states. Lüdenscheid: RAM-Verlag, p. 58-62.
    11. KUNDRÁK, J. (2011). Alternative machining procedures of hardened steels, in: Manufacturing Technology, XI/2011, ISSN 1213-2489, p. 32 - 39.
    12. MULLER M., VALÁŠEK P.: Interaction of steel surface treatment by means of abrasive cloth and adhesive bond strength. In.: Manufactruing Technology. 2011. pp. 49 - 57. ISSN 1213-2489 Go to original source...
    13. KOCMAN, K. Application of magnetic correlation analysis on the choice and correction of cutting parameters for automated manufacturing systems. Manufacturing Technology, vol.XI, 2011, pp. 28-32 Go to original source...
    14. SÝKOROVÁ, L., Malachová, M. (2012). Laser Machining and Temperature Field Simulation Using COSMOS / M Software. Manufacturing Technology. Nr. 12. ISSN 12132489, s. 113-117

    Return to the content