Manufacturing Technology 2016, 16(2):461-467 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/2/461

Influence of Cutting Conditions on Profile Milling of INCONEL 738LC Alloy

Jan Tomíček, Alexey Molotovnik
Department of machining, process planning and metrology, Faculty of mechanical engineering, CTU in Prague. Technicka 4, 166 07 Praha 6 Dejvice. Czech Republic

This article presents particular results from a long term research focused on machining of INCONEL alloys. As a representative of this group of material INCONEL 738LC is selected and the article presents results of different experiments conducted. The behavior of material under different conditions was evaluated with focus to define cutting condition that can be recommended as suitable cutting conditions for profile milling of material. Basic problems of profile milling are exposed with focus to the respective material. Several machining experiments are explained and archived results are discussed. Effect of tool geometry and geometrical constraints and relations during profile milling is defined. Tool wear and cutting forces were measured and evaluated. The final conclusion is a recommendation for successful machining of given material.

Keywords: Inconel 738LC, profile milling, CAM, cutting force, tool wear

Published: April 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Tomíček J, Molotovnik A. Influence of Cutting Conditions on Profile Milling of INCONEL 738LC Alloy. Manufacturing Technology. 2016;16(2):461-467. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/2/461.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. MALÝ, J. (2006). Obrábění težkoobrobitelných materiálů se zaměením na trvanlivost břitu nástroje a velikost sil při obrábění, České vysoké učení technické v Praze, fakulta strojní, VÝZKUMNÉ CENTRUM PRO STROJÍRENSKOU VÝROBNÍ TECHNIKU A TECHNOLOGII, Praha.
    2. AUTHORS COLLECTIVE, (2012). Hodnocení metalografických vzorků, [Online]. Available: http://ime.fme.vutbr.cz/files/Studijni%20opory/PHMV/ni_i738.php. [Accessed 01 11 2012].
    3. ALL METALS & FORGE GROUP, (2012). Alloy Information Report for Inconel™ 738, [Online]. Available: http://www.steelforge.com/forgings/alloys/inconel738report.php.
    4. AUTHORS COLLECTIVE, (2012). Nickel development institute - Machining Nickel Alloys handbook, [Online]. Available: http://www.nickelinstitute.org/~/Media/Files/TechnicalLiterature/MachiningNickelAlloys_11008_.pdf. [Accessed 05 07 2012].
    5. UHLÁŘ, V. (2008). Problematika prvního záběru břitu nástroje při frézování (doctoral thesis), VŠB-TUO, Fakulta strojní, Ostrava
    6. ALAUDDIN, M., MAZID, M.A.,EL BARADI, M.A., HASHMI, M.S.J. (1998) Cutting Forces In The End Milling Of Inconel 718, Journal of Materials Processing Technology, vol. 77, pp.153-159, Elsevier Go to original source...
    7. GUHRING at al. (2012) Guhring / Tool catalogue 2012 [Online]. Available: http://www.guehring.cz/data/produkty/cz_64.pdf. [Accessed 15 09 2014].
    8. VYSKOČIL, Z. (2013) Odborná zpráva o postupu prací a dosažených výsledcích za rok 2012 projektu Výzkum integrity povrchu pro zavedení nových progresivních technologií výroby na 4- a 5-ti osých obráběcích centrech, PBS Velká bíteš, Velká Bíteš.
    9. VRABEC, M., TOMÍČEK, J. (2007). Surface Quality after 5-Axis Milling, In: Funkčné povrchy v strojárstve 2007, pp. 187-192, ISSN 1336-9199. ISBN 978-80-8075-217-0, Trenčianska univerzita, Fakulta špeciálnej techniky, Trenčín.
    10. KYNCL, J., BERÁNEK, L., KOLAŘÍK, K., PALA, Z. (2014). The Research of the Surface Profile after Profiling of Inconel 738LC, Procedia Engineering, vol. 2014, no. 69, pp. 974-979, ISSN 1877-7058 Go to original source...
    11. KOLAŘÍK, K., PALA, Z., ČAPEK, J., BERÁNEK, L. VYSKOČIL, Z. (2014). Non-Destructive Inspection of Surface Integrity in Milled Turbine Blades of Inconel 738LC, In: Applied Mechanics and Materials, pp. 9-15, ISSN 1660-9336. ISBN 978-3-03785-977-3, Trans Tech Publications, Uetikon-Zurich Go to original source...
    12. GANEV, N., KOLAŘÍK, K., BERÁNEK, L., MIKEŠ, P. (2014). X-Ray Diffraction Analysis Of Residual Stersses After Milling Of Super-Alloys, in: International Conference on Technics, Technologies and Education ICTTE 2014, Faculty of Technics and Technologies, Trakia University, 2014, p. 49-54. ISSN 1314-9474, Yambol.

    Return to the content