Manufacturing Technology 2016, 16(5):949-955 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/949

Surface Treatment of Materials for Variable Applications and Surface Properties and Characterization

Zdenka Kolska1, Monika Benkocka1, Tereza Knapova1, Nikola Slepickova Kasalkova2, Katerina Kolarova2, Petr Slepicka2, Vaclav Svorcik2
1 Faculty of Science, J. E. Purkyne University in Usti nad Labem. Ceske Mladeze 8, 400 96 Usti nad Labem. Czech Republic
2 Department of Solid State Engineering, University of Chemistry and Technology, Technická 3, 16628 Prague, Czech Republic

Many materials of general interest, which they are frequently employed in common life, industry, biotechnology, tissue engineering studies, medicine, have many excellent properties, but their inert nature may limit their wider usage in some cases. Many modification techniques have been therefore developed to improve surface properties of variable substrates for other applications. For a long time we study surface properties of a wide range of substrates (polymers, glass, silicate powders, etc.). Surfaces of studied materials are firstly activated by chemical or physical ways and than variable chemical compounds (e.g. nanoparticles, nanostructures or nanolyers) are grafted or deposited on. Surface properties are characterized before and after individual activation or modification steps by many techniques (microscopies, spectroscopies, goniometry, electrokinetic analyses, X-ray diffraction, etc.). Some of tested samples are also tested for antimicrobial activities and/or for cell adhesion and proliferation for their potential usage in tissue engineering. This paper presents a survey of techniques for preparation of nano-structured materials for usage in electronic, optics or medicine and selected results.

Keywords: Surface Modification, Surface Properties, Surface Characterization, Surface Activation, Grafting

Published: October 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kolska Z, Benkocka M, Knapova T, Slepickova Kasalkova N, Kolarova K, Slepicka P, Svorcik V. Surface Treatment of Materials for Variable Applications and Surface Properties and Characterization. Manufacturing Technology. 2016;16(5):949-955. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/949.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BAČÁKOVÁ, L., FÍLOVÁ, E., PAŘÍZEK, M., RUML, T., ©VORČÍK, V. (2011). Control of cell adhesion, proliferation and differentiation on materials designed for body implants. Biotechnology Advances, 29, pp. 739-767. Go to original source...
    2. REZNICKOVA, A., SIEGEL, J., SLAVIKOVA, N., KOLSKA, Z., STASZEK, M., SVORCIK, V. (2016). Metal nanoparticles designed PET: preparation, characterization and biological response. Reactive and Functional Polymers, 105, pp. 1-8. Go to original source...
    3. KOLSKÁ, Z., ŘEZNÍČKOVÁ, A., NAGYOVÁ, M., SLEPIČKOVÁ KASÁLKOVÁ, N., SAJDL, P., SLEPIČKA, P., ©VORČÍK, V. (2014). Plasma activated polymers grafted with cysteamine for bio-application. Polymer Degradation and Stability, 101, pp. 1-9. Go to original source...
    4. LUPÍNKOVÁ, S., VÝBORNÝ, K., BENKOCKÁ, M., KOLSKÁ, Z., SLEPIČKOVÁ KASÁLKOVÁ, N., ©VORČÍK, V. (2014). Analýza povrchů polymerů aktivovaných plazmatem a následně roubovaných vicinálními sloučeninami. Chemické Listy, 108, pp. s237-s240.
    5. MIKULÍKOVÁ, R., MORITZ, S., GUMPENBERGER, T., OLBRICH, M., ROMANIN, C., BAČÁKOVÁ, L., ©VORČÍK, V., HEITZ, J. (2005). Cell microarrays on photochemically modified PTFE. Biomaterials, 26, pp. 5572-5580. Go to original source...
    6. SLEPIČKA, P., SLEPIČKOVÁ KASÁLKOVÁ, N., SIEGEL, J., KOLSKÁ, Z., BAČÁKOVÁ, L., ©VORČÍK, V. (2015). Nano-structured and functionalized surfaces for cytocompatibility improvement and bactericidal action. Biotechnology Advances, 33, pp. 1120-1129. Go to original source...
    7. LI, L., HONG, M., SCHMIDT, M., ZHONG, M., MALSHE, A., HUIS, P., VELD, B. (2011). Laser nano-manufacturing - State of the art and challenges, CIRP Annals. Manufacturing Technology, 11, pp. 735-55. Go to original source...
    8. SVOBODOVÁ, J., KRAUS, P. (2015). Influence of Chemical Pre-treatments Nanotechnology Based Applied to the Al Sheet on the Roughness and Morphology of the Surface. Manufacturing Technology, 15, pp. 714-720. Go to original source...
    9. DOAN, V.T., KUSMIC, D., POSPICHAL, M. (2015). Surface Treatment Technologies for Wear Resistance Increasing of 42CrMo4 Steel. Manufacturing Technology, 15, pp. 303-307. Go to original source...
    10. SLEPIČKA, P., CHALOUPKA, A., SAJDL, P., HEITZ, J., HNATOWICZ, V., ©VORČÍK, V. (2011). Angle dependent laser nanopatterning of poly(ethylene terephthalate) surfaces. Applied Surface Science, 257, pp. 6021-6025. Go to original source...
    11. SIEGEL, J., HEITZ, J., ŘEZNÍČKOVÁ, A., ©VORČÍK, V. (2013). Preparation and characterization of fully separated gold nanowire arrays. Applied Surface Science, 264, pp. 443-447. Go to original source...
    12. SLEPIČKA, P., NEDĚLA, O., SIEGEL, J., KRAJCAR, R., KOLSKÁ, Z., ©VORČÍK, V. (2014). Ripple polystyrene nano-pattern induced by KrF laser. EXPRESS Polymer Letters, 8, pp. 459-466. Go to original source...
    13. SLEPIČKA, P., NEDĚLA, O., SAJDL, P., KOLSKÁ, Z., ©VORČÍK, V. (2013). Polyethylenenaphtalate as an excellent candidate for ripple nanopatterning. Applied Surface Science, 285B, pp. 885-892. Go to original source...
    14. ZAKOVA, P., KASALKOVA SLEPICKOVA, N., KOLSKA, Z., LEITNER, J., KARPISKOVA, J., STIBOR, I., SLEPICKA, P., SVORCIK, V. (2016). Cytocompatibility of amine functionalized carbon nanoparticles grafted on polyethylene. Materials Science & Engineering C-Materials for Biological Applications, 60, pp. 394-401. Go to original source...
    15. ŘEZNÍČKOVÁ, A., KOLSKÁ, Z., SIEGEL, J., ©VORČÍK, V. (2012). Grafting of gold nanoparticles and nanorods on plasma-treated polymers by thiols. Journal of Material Science, 47, pp. 6297-6304. Go to original source...
    16. ©VORČÍK, V., KOLSKÁ, Z., KVÍTEK, O., SIEGEL, J., ŘEZNÍČKOVÁ, A., ŘEZANKA, P., ZÁRUBA, K. (2011). "Soft and rigid" dithiols and Au nanoparticles grafting on plasma-treated polyethyleneterephthalate. Nanoscale Research Letters, 6, pp. 607-613. Go to original source...
    17. ©VORČÍK, V., KOLSKÁ, Z., SIEGEL, J., SLEPIČKA, P. (2013). "Short" Dithiol and Au Nanoparticles Grafting on Plasma Treated Polyethyleneterephthalate. Journal of Nano Research, 25, pp. 40-48. Go to original source...
    18. ŘEZNÍČKOVÁ, A., KOLSKÁ, Z., ZÁRUBA, K., ©VORČÍK, V. (2014). Grafting of gold nanoparticles on polyethyleneterephthalate using dithiol interlayer. Materials Chemistry and Physics, 145, pp. 484-490. Go to original source...
    19. ©VORČÍK, V., MAKAJOVÁ, Z., KASÁLKOVÁ, N., KOLSKÁ, Z., BAČÁKOVÁ, L. (2012). Plasma-Modified and Polyethylene Glycol-Grafted Polymers for Potential Tissue Engineering Applications. Journal of Nanoscience and Nanotechnology, 12, pp. 6665-6671. Go to original source...
    20. KOLSKÁ, Z., MATOU©EK, J., ČAPKOVÁ, P., BRABOREC, B., ČERNÁ, H., BENKOCKÁ, M., LONDESBOROUGH, M.G.S. (2015). A luminescent montmorillonite/borane nanocomposite. Applied Clay Science, 118, pp. 295-300. Go to original source...
    21. LUPÍNKOVÁ, S., BENKOCKÁ, M., BRABOREC, J., MATOU©EK, J., KOLÁŘOVÁ, K., LONDESBOROUGH, M. G. S., KOLSKÁ, Z. (2016). Analýza chemicky modifikovaných polymerních povrchů. Czech Chemical Society Symposium Series, 14, pp. 19-22.
    22. KOLSKÁ, Z., MAKAJOVÁ, Z., KOLÁŘOVÁ, K., KASÁLKOVÁ SLEPIČKOVÁ, N., TROSTOVÁ, S., ŘEZNÍČKOVÁ, A., SIEGEL, J., ©VORČÍK, V. (2013). Electrokinetic potential and other surface properties of polymer foils and their modifications. In: Polymer Science, pp. 203-228. In Tech d.o.o., Rijeka, Croatia. Go to original source...
    23. KOLSKÁ, Z., ŘEZNÍČKOVÁ, A., ©VORČÍK, V. (2012). Surface characterization of polymer foils. e-Polymers, Article No. 083, pp. 1-13. Go to original source...
    24. KOLSKÁ, Z., SLEPIČKOVÁ KASÁLKOVÁ, N., SIEGEL, J., ©VORČÍK, V. (2013). Electrokinetic Potential for Characterization of Nanosctructured Solid Flat Surfaces. Journal of Nano Research, 25, pp. 31-39. Go to original source...
    25. HIEMENZ, P., RAJAGOPALAN, R. (1997). The electrical double layer and double-layer interactions. In: Principles of colloid and surface chemistry, pp. 499-533, Marcel Dekker, Inc., New York.
    26. BEATTIE, J. K. (2006). The intrinsic charge on hydrophobic microfluidic substrates. Laboratory Chip, 6, pp. 1409-1411. Go to original source...
    27. KOSMULSKI, M. (2001). Chemical properties of material surfaces. 102, Marcel Dekker, Inc., New York, 2001. Go to original source...
    28. KLIKA, Z., PUSTKOVÁ, P., PRAUS, P., KOVÁŘ, P., POSPI©IL, M., MALÝ, P., GRYGAR, T., KULHÁNKOVÁ, L., ČAPKOVÁ, P. (2009). Fluorescence of reduced charge montmorillonite complexes with methylene blue: Experiments and molecular modeling. Journal of Colloid and Interface Science, 339, pp. 416-423. Go to original source...
    29. KLIKA, Z., PUSTKOVÁ, P., DUDOVÁ, M., ČAPKOVÁ, P., KLIKOVÁ, C., GRYGAR, T.M. (2011). The adsorption of methylene blue on montmorillonite from acid solutions. Clay Minerals, 46, pp. 461-471. Go to original source...
    30. POLIVKOVA, M., SIEGEL, J., KOLAROVA, K., RIMPELOVA, S., SVORCIK, V. (2016). Silver Nanostructures Sputtered on Polyimide: Surface Characterization and Antibacterial Properties. Chemické Listy, 110, pp. 139-143.
    31. SIEGEL, J., POLIVKOVA, M., STASZEK, M., KOLAROVA, K., RIMPELOVA, S., SVORCIK, V. (2015). Nanostructured silver coatings on polyimide and their antibacterial response. Materials Letters, 145, pp. 87-90. Go to original source...

    Return to the content