Manufacturing Technology 2016, 16(5):1102-1106 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1102

The Shape and Structure of Titanium Dioxide Nanoparticles

Jan Novotný1, Martin Jaskevič2, Jaromír Cais1, Tran Doan Hung3
1 Faculty of Production Technology and Management, J. E. Purkyne University in Usti nad Labem. Pasteurova 7, 400 01 Usti nad Labem. Czech Republic
2 Faculty of Science, Department of Physics. J. E. Purkyne University in Usti nad Labem. České Mládeže 8, 400 01 Usti nad Labem. Czech Republic
3 Nha Trang University, Faculty of Civil Engineering, 02 Nguyen Dinh Chieu, Nha trang, Vietnam

Paper deals with problems of nanoparticles and nanomaterials applied in technical practice. In this time, we are looking for and examining ways of their best properties utilization. When being applied on the base material (metal, plastic, glass, incl. paper, cloth, etc.) In the form of very thin layer, then the base material can obtain very different properties, mostly advantageous, including improvement of their mechanical properties. To obtain these properties, it is necessary to apply nanomaterials in the form of very thin layer and for this purpose we need extremely fine granular nanoparticles that can be produced by means of fine milling technology. Resulting size, structure and shape of individual particles grains have the deciding influence on the successful application of these nanomaterials layers.

Keywords: nanoparticles, engineering practice, grinding processes

Published: October 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novotný J, Jaskevič M, Cais J, Hung TD. The Shape and Structure of Titanium Dioxide Nanoparticles. Manufacturing Technology. 2016;16(5):1102-1106. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1102.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. GIACOVAZZO, C. (2002). Fundamentals of Crystallography, Oxford University Press, USA 2002.
    2. KEJZLAR, P. (2012). Structure and mechanical properties of Fe-25Al-5Zr and Fe-30Al-5Zr intermetallic alloys. Manufacturing Technology, Ústí nad Labem, 2012 Voume 12. ISSN 1213-2489 Go to original source...
    3. NOVOTNY, J., JASKEVIC, M. (2015). Morphology and producing of TiO2 particles, Engineering for Rural Development, 2016 Vol. 15, Latvia, 2015, ISSN 16913043
    4. VALASEK, P., MULLER, M. (2012). Polymeric particle composites with filler saturated matrix. Manufacturing Technology, Ústí nad Labem 2012 Voume 12. ISSN 1213-2489 Go to original source...
    5. WEISS, V., STRIHAVKOVA, E. (2012). Influence of the homogenization annealing on microstructure and mechanical properties of AlZn5,5Mg2,5Cu1,5 alloy. Manufacturing Technology, Ústí nad Labem 2012 Voume 12. ISSN 1213-2489 Go to original source...

    Return to the content