Manufacturing Technology 2016, 16(5):1136-1140 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1136

Comparison of Ni-Ti-Si Alloy Prepared by Various Powder Metallurgy Routes

Pavel Salvetr, Benoit Daney, Pavel Novák
University of Chemistry and Technology, Department of Metals and Corrosion Engineering, Technicka 5, 166 28 Prague 6, Czech Republic

This work describes three ways of preparation of Ni-Ti-Si shape memory alloy by powder metallurgy methods. The self-propagating high-temperature synthesis, combination of self-propagating high-temperature synthesis, milling and spark plasma sintering and mechanical alloying with following spark plasma sintering were applied to Ni-Ti-Si powder mixture. The differences in microstructure, phase composition, transformation temperatures and mechanical properties were observed and at the same time these properties were compared with other Ni-Ti and Ni-Ti-X alloys.

Keywords: Ni-Ti-X alloy, Powder metallurgy, Self-propagating high-temperature synthesis, Spark plasma sintering, Mechanical alloying

Published: October 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Salvetr P, Daney B, Novák P. Comparison of Ni-Ti-Si Alloy Prepared by Various Powder Metallurgy Routes. Manufacturing Technology. 2016;16(5):1136-1140. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1136.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. W.M. HUANG, Z. DING, C.C. WANG, J. WEI, Y. ZHAO, H. PURNAWALI (2010). Shape memory materials. Materials Today, Vol. 13, pp. 54-61. Go to original source...
    2. J. MOHD JANI, M. LEARY, A. SUBIC, M.A. GIBSON (2014). A review of shape memory alloy research, applications and opportunities. Materials & Design, Vol. 56, pp. 1078-1113. Go to original source...
    3. T. DUERIG, A. PELTON, CH. TREPANIER (2011). Nitinol - PART I Mechanism and Behaviour, SMST e-Elastic newsletter, ASM International.
    4. K.S. SURESH, D.I. KIM, S.K. BHAUMIK, S. SUWAS (2014). Evolution and stability of phases in a high temperature shape memory alloy Ni49.4Ti38.6Hf12. Intermetallics, Vol. 44, pp. 18-25. Go to original source...
    5. R. SANTAMARTA, R. ARRÓYAVE, J. PONS, A. EVIRGEN, I. KARAMAN, H.E. KARACA, R.D. NOEBE (2013). TEM study of structural and microstructural characteristics of a precipitate phase in Ni-rich Ni-Ti-Hf and Ni-Ti-Zr shape memory alloys. Acta Materialia, Vol. 61, pp. 6191-6206. Go to original source...
    6. Y. KAIEDA (2003). Fabrication of composition-controlled TiNi shape memory wire using combustion synthesis process and the influence of Ni content on phase transformation behavior. Science and Technology of Advanced Materials, Vol. 4, pp. 239-246. Go to original source...
    7. K. OTSUKA, X. REN (2005). Physical metallurgy of Ti-Ni-based shape memory alloys. Progress in Materials Science, Vol. 50, pp. 511-678. Go to original source...
    8. J. FRENZEL, E.P. GEORGE, A. DLOUHY, C. SOMSEN, M.F.X. WAGNER, G. EGGELER (2010). Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Materialia, Vol. 58, pp. 3444-3458. Go to original source...
    9. J. FRENZEL, Z. ZHANG, K. NEUKING, G. EGGELER (2004). High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles. Journal of Alloys and Compounds, Vol. 385, pp. 214-223. Go to original source...
    10. A. FOROOZMEHR, A. KERMANPUR, F. ASHRAFIZADEH, Y. KABIRI (2011). Investigating microstructural evolution during homogenization of the equiatomic NiTi shape memory alloy produced by vacuum arc remelting. Materials Science and Engineering: A, Vol. 528, pp. 7952-7955. Go to original source...
    11. V. KUČERA, J. ČAPEK, A. MICHALCOVÁ, D. VOJTĚCH (2014). Preparation and characterization of niti shape memory alloy preparedby powder metallurgy. Manufacturing Technology, Vol. 14, pp. 342-347. Go to original source...
    12. P. NOVÁK, L. MEJZLÍKOVÁ, A. MICHALCOVÁ, J. ČAPEK, P. BERAN, D. VOJTĚCH (2013). Effect of SHS conditions on microstructure of NiTi shape memory alloy. Intermetallics, Vol. 42, pp. 85-91. Go to original source...
    13. P. NOVÁK, J. KŘÍŽ, A. MICHALCOVÁ, P. SALVETR (2015). Role of Reactive Sintering in Production of Technically Important Intermetallics. Manufacturing Technology, Vol. 15, pp. 74-77. Go to original source...
    14. P. NOVÁK, H. MORAVEC, P. SALVETR, F. PRŮŠA, J. DRAHOKOUPIL, J. KOPEČEK, M. KARLÍK, T.F. KUBATÍK (2015). Preparation of nitinol by non-conventional powder metallurgy techniques. Materials Science and Technology, Vol. 31, pp. 1886-1893. Go to original source...
    15. M.T. ANDANI, N. SHAYESTEH MOGHADDAM, C. HABERLAND, D. DEAN, M.J. MILLER, M. ELAHINIA (2014). Metals for bone implants. Part 1. Powder metallurgy and implant rendering. Acta Biomaterialia, Vol. 10, pp. 4058-4070. Go to original source...
    16. M. BRAM, A. AHMAD-KHANLOU, A. HECKMANN, B. FUCHS, H.P. BUCHKREMER, D. STÖVER (2002). Powder metallurgical fabrication processes for NiTi shape memory alloy parts. Materials Science and Engineering: A, Vol. 337, pp. 254-263. Go to original source...
    17. M.H. ELAHINIA, M. HASHEMI, M. TABESH, S.B. BHADURI (2012). Manufacturing and processing of NiTi implants: A review. Progress in Materials Science, Vol. 57, pp. 911-946. Go to original source...
    18. C. SURYANARAYANA (2001). Mechanical alloying and milling. Progress in Materials Science, Vol. 46, pp. 1-184. Go to original source...
    19. Z.A. MUNIR, U. ANSELMI-TAMBURINI, M. OHYANAGI (2006). The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method. Journal of Materials Science, Vol. 41, pp. 763-777. Go to original source...
    20. P. NOVÁK, T. VESELÝ, I. MAREK, P. DVOŘÁK, V. VOJTĚCH, P. SALVETR, M. KARLÍK, P. HAUŠILD, J. KOPEČEK (2016). Effect of Particle Size of Titanium and Nickel on the Synthesis of NiTi by TE-SHS. Metallurgical and Materials Transactions B, Vol. 47, pp. 932-938. Go to original source...
    21. M. WHITNEY, S.F. CORBIN, R.B. GORBET (2009). Investigation of the influence of Ni powder size on microstructural evolution and the thermal explosion combustion synthesis of NiTi. Intermetallics, Vol. 17, pp. 894-906. Go to original source...
    22. P. SALVETR, P. NOVÁK, H. MORAVEC (2015). Ni-Ti Alloys Produced by Powder Metallurgy. Manufacturing Technology, Vol. 15, pp. 689-694. Go to original source...
    23. P. SALVETR, T.F. KUBATÍK, P. NOVÁK. Preparation of Ni-Ti shape memory alloy by spark plasma sintering method. Manufacturing Technology, in press.
    24. A. ŠKOLÁKOVÁ, P. NOVÁK, P. SALVETR. Influence of Elements with High Affinity to Oxygen on Microstructure and Phase Composition of Ni-Ti Alloy. Manufacturing Technology, in press.

    Return to the content