Manufacturing Technology 2016, 16(5):1162-1168 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1162

Microscopy of Material Surfaces for Tissue Engineering

Václav ©vorčík1, Petr Slepička1, Jakub Siegel1, Oleksiy Lyutakov1, Nikola Slepičková Kasálková1, Kateřina Kolářová1, Alena Řezníčková1, Zdeňka Kolská2
1 Department of Solid State Engineering, University of Chemistry and Technology, Technická 3, 16628 Prague, Czech Republic
2 Faculty and Science, J. E. Purkyne University in Usti nad Labem, 400 01 Usti nad Labem. Czech Republic

The field of material surface modification with aim of biomaterials construction involves several approaches based on surface treatments that allow to prepare materials, which support the cell adhesion and proliferation and thus aid and improve the tissue formation. Modified materials have a surface composition and morphology intended to interact with biological systems and cellular functions. Not only surface chemistry has an effect on material biological response, surface structures of different morphology can be constructed to guide a desirable biological outcome. Nano-patterned material surfaces have been tested with aim to determine how surface geometry, physical and chemical properties on a micro- and nano-scale can affect cellular response and influence cell adhesion and proliferation. Surface physico-chemical properties (e.g. chemistry, morphology, wettability, electrical conductivity, optical and mechanical properties) of treated surfaces were determined. The enhancement in cell adhesion and proliferation on modified substrates was studied in vitro. Bactericidal action of noble metal nano-particles (e.g. Au, Ag) on polymers was characterized. The influence of metal nano-particles grafting by using metal nano-particle suspension prepared by "green" methods was determined.

Keywords: Polymer, Surface Treatment, Morphology, Cells, Bacteria, Surface Characterization

Published: October 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
©vorčík V, Slepička P, Siegel J, Lyutakov O, Slepičková Kasálková N, Kolářová K, et al.. Microscopy of Material Surfaces for Tissue Engineering. Manufacturing Technology. 2016;16(5):1162-1168. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1162.
Download citation

References

  1. BAUER, S., SCHMUCKI, P., von der MARK, K., PARK, J. (2013). Engineering biocompatible implant surfaces: Part I: Materials and surfaces. Progress Materials Science, 58, pp. 261-326. Go to original source...
  2. PROKOPOVICH, P., RAHNEJAT, H. (2010). Surface phenomena in thin-film tribology, Tribology and Dynamics of Engine and Powertrain Fundamentals, Applied Future Trends, 12, pp. 73-104. Go to original source...
  3. FENG, CH. L., ZHANG, D., SCHONHERR, H. (2011). The investigation of cell adhesion on nano-patterned biointerfaces of block copolymer films by reactive microcontact printing approach. Journal of Controlled Relase, 152, pp. 201-202. Go to original source...
  4. VASUDEVAN, R., KENNEDY, A. J., MERRITT, M., CROCKER, F. H., BANEY, R. H. (2014). Microscale patterned surfaces reduce bacterial fouling-microscopic and theoretical analysis. Colloids Surface B, 117, pp. 225-232. Go to original source...
  5. TIAN, H., TANG, Z., ZHUANG, X., CHEN, X., JING, X. (2012). Biodegradable synthetic polymers: Preparation, functionalization and biomedical application. Progress in Polymer Science, 37, pp. 237-280. Go to original source...
  6. SLEPIČKA, P., TROSTOVÁ, S., SLEPIČKOVÁ KASÁLKOVÁ, N., KOLSKÁ, Z., MALINSKÝ, P., MACKOVÁ, A., ©VORČÍK, V. (2012). Nanostructuring of polymethylpentene by plasma and heat treatment for improved biocompatibility. Polymer Degradation and Stability, 97, pp. 1075-1082. Go to original source...
  7. SLEPIČKOVÁ KASÁLKOVÁ, N., SLEPIČKA, P.,KOLSKÁ, Z., HODAČOVÁ, P., KUČKOVÁ, ©., ©VORČÍK, V. (2014). Grafting of bovine serum albumin proteins on plasma-modified polymers for potential application in tissue engineering. Nanoscale Research Letters, 9, pp. 161-167. Go to original source...
  8. GRAUSOVÁ, L., VACÍK, J., VORLÍČEK, V., ©VORČÍK, V., SLEPIČKA, P., BÍLKOVÁ, P., VANDROVCOVÁ, P. (2009). Fullerene C-60 films of continuous and micropatterned morphology as substrates for adhesion and growth of bone cells. Diamond and Related Materials, 2-3, pp. 578-86. Go to original source...
  9. LI, L., HONG, M., SCHMIDT, M., ZHONG, M., MALSHE, A., HUIS, P., VELD, B. (2011). Laser nano-manufacturing - State of the art and challenges, CIRP Annals: Manufacture Technology, 11, pp. 735-55. Go to original source...
  10. SLEPIČKA, P., CHALOUPKA, A., SAJDL, P., HEITZ, J., HNATOWICZ, V., ©VORČÍK, V. (2011). Angle dependent laser nanopatterning of poly(ethylene terephthalate) surfaces. Applied Surface Science,;257, pp. 6021-25. Go to original source...
  11. SIEGEL, J., HEITZ, J., ŘEZNÍČKOVÁ, A., ©VORČÍK, V. (2013). Preparation and characterization of fully separated gold nanowire arrays. Applied Surface Science, 264, pp. 443-447. Go to original source...
  12. REBOLLAR, E., FRISCHAUF, I., OLBRICH, M., PETERBAUER, T., HERING, S., PREINER, J. (2008). Proliferation of aligned mammalian cells on laser-nanostructured polystyrene. Biomaterials, 29, pp. 1796-1806. Go to original source...
  13. SVOBODA, M., SOUKUP, J., JELEN, K., KUBOVÝ, P. (2015). Effect of Impacts on Human Head. Manufacturing Technology, 15, pp. 226-231. Go to original source...
  14. YANG, Z-W., LUO, Q., TIAN, G., ZHANG, W., ZHU, J.-T. (2015). Design and Implement of Infrared Thermography Detection System Excited by Pulsed Flash Lamp. Manufacturing Technology, 15, pp. 249-255. Go to original source...
  15. SLEPIČKA, P., SLEPIČKOVÁ KASÁLKOVÁ, N., SIEGEL, J., KOLSKÁ, Z., BAČÁKOVÁ, L., ©VORČÍK, V. (2015). Nano-structured and functionalized surfaces for cytocompatibility improvement and bactericidal action, Biotechnology Advances, 33, pp. 1120-1129. Go to original source...
  16. BAČÁKOVÁ, L., FÍLOVÁ, E., PAŘÍZEK, M., RUML, T., ©VORČÍK, V. (2011). Control of cell adhesion, proliferation and differentiation on materials designed for body implants. Biotechnology Advances, 29, pp. 739-767. Go to original source...
  17. MIKULÍKOVÁ, R.,MORITZ, S., GUMPENBERGER, T., OLBRICH, M., ROMANIN, C., BAČÁKOVÁ, L., ©VORČÍK, V., HEITZ, J. (2005). Cell microarrays on photochemically modified PTFE. Biomaterials, 26, pp. 5572-5580. Go to original source...
  18. ŘEZNÍČKOVÁ, A., KOLSKÁ, Z., HNATOWICZ, V., ©VORČÍK, V. (2011). Nano-structuring of PTFE surface by plasma treatment, etching, and sputtering with gold. Journal of Nanoparticles Research, 13, pp. 2929-2938. Go to original source...
  19. ©VORČÍK, V., MAKAJOVÁ, Z., SLEPIČKOVÁ KASÁLKOVÁ, N.,, KOLSKÁ, Z., STIBOR, I., KARPÍ©KOVÁ, J., ®ÁKOVÁ, P., SLEPIČKA, P. (2014). Cytocompatibility of polymers grafted by activated carbon nano-particles. Carbon, 69, pp.361-371. Go to original source...
  20. SLEPIČKOVÁ KASÁLKOVÁ, N., SLEPIČKA, P., KOLSKÁ, Z., SAJDL, P., BAČÁKOVÁ, L., ©VORČÍK, V. (2012). Cells adhesion and proliferation on Au nano-particles grafted polyethylene. Nuclear Instruments and Methods B, 272, pp.391-395. Go to original source...
  21. SIEGEL, J., KVÍTEK, O., ULBRICH, P., KOLSKÁ, Z., SLEPIČKA, P., ©VORČÍK, V. (2012). Progressive approach for metal nanoparticle synthesis. Materials Letters, 89, pp. 47-50. Go to original source...
  22. SLEPIČKA, P., PETERKOVÁ, L., RIMPELOVÁ, S., PINKNER, A., SLEPIČKOVÁ KASÁLKOVÁ, N., KOLSKÁ, Z., RUML, T., ©VORČÍK, V. (2016). Plasma activation of perfluoroethylenepropylene for cytocompatibility enhancement. Polymer Degradation and Stability, 130, pp. 277-287. Go to original source...
  23. ©VANDA, J., LYUTAKOV, O., VOSMANSKÁ, V., ©VORČÍK, V. (2015). Combination of temperature and saturated vapor annealing for phase separation of block copolymer. Journal of Applied Polymer Science 132, 41853, pp. 1-8. Go to original source...
  24. SLEPIČKA, P., MICHALJANIČOVÁ, I., SLEPIČKOVÁ KASÁLKOVÁ, N., KOLSKÁ, Z., RIMPELOVÁ, S., RUML, T., ©VORČÍK, V. (2013). Poly-L-lactic acid modified by etching and grafting with gold nanoparticles. Journal of Materials Science, 48, pp.5871-5879. Go to original source...
  25. ŘEZNÍČKOVÁ, A., KOLSKÁ, Z., HNATOWICZ, V., STOPKA, P., ©VORČÍK, V. (2011). Comparison of glow argon plasma-induced surface changes of thermoplastic polymers. Nuclear Instruments and Methods B, 269, pp. 83-88. Go to original source...
  26. SIEGEL, J., KOLÁŘOVÁ, K., VOSMANSKÁ, V., RIMPELOVÁ, S., LEITNER, J., ©VORČÍK, V. (2013). Antibacterial properties of green-synthesized noble metal nanoparticles. Materials Letters, 113, pp. 59-63. Go to original source...
  27. NOVOTNÁ, Z., ŘEZNÍČKOVÁ, A., RIMPELOVÁ, S., VESELÝ, M., KOLSKÁ, Z., ©VORČÍK, V. (2015). Tailoring of PEEK bioactivity for improved cell interaction: Plasma treatment in action. RSC Advances, 5, pp. 41428-41436. Go to original source...
  28. POLÍVKOVÁ, M., VALOVÁ, M., SIEGEL, J., RIMPELOVÁ, S., HUBÁČEK, T., LYUTAKOV, O., ©VORČÍK, V. (2015). Antibacterial properties of palladium nanostructures sputtered on polyethylenenaphthalate. RSC Advances, 5, pp. 73767-73774. Go to original source...
  29. VOSMANSKÁ, V., KOLÁŔOVÁ, K., RIMPELOVÁ, S., KOLSKÁ, Z., ©VORČÍK, V. (2015). Antibacterial dressing: Does plasma treatment affect chitosan and AgCl impregnation on the cellulose surface. RSC Advances, 5, pp. 17690-17695. Go to original source...