Manufacturing Technology 2017, 17(3):291-295 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/3/291

Strength Analysis of a Structure for Attachment of a Winch on SUV

Miroslav Blatnický1, Ján Dižo1, Mária Štauderová2
1 Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Žilina, 010 26 Žilina. Slovak Republic
2 Department of Applied mechanics, Faculty of Mechanical Engineering, University of Žilina, 010 26 Žilina. Slovak Republic

The paper deals with design proposal of a cover part of a strength bumper, which is tasked with creating the outer design lines of an automobile without sharp edges according to legislation in force and also with protecting a vehicle against damage. The cover part serves for covering the strength part of a back strength bumper, which will be equipped with a winch and used in off-road vehicle Nissan Patrol Y61. Another aim is to perform a FEM analysis of the strength part of the bumper loaded by towing force of the winch and thus to verify a safety of the structure. The next solution of the issue will be an approach to real testing, which will verify a correctness of a numerical computations and also fulfilment of the purpose of creating the structure. Bases of FEM analysis and practical experimental verifications of the structure will be also used as a background for granting approvals, certifications and type approval by superior authorities.

Keywords: Numerical analysis, Winch, SUV, Bumper

Published: June 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Blatnický M, Dižo J, Štauderová M. Strength Analysis of a Structure for Attachment of a Winch on SUV. Manufacturing Technology. 2017;17(3):291-295. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/3/291.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BLATNICKÝ, M., DIŽO, J. (2016). Analysis of the hydraulic arm for use on a light goods vehicle. Production management and engineering sciences. pp. 351-354. CRC Press Taylor and Francis Group. ISBN 978-1-138-02856-2. Go to original source...
    2. HARUŠINEC, J., GERLICI, J., LACK, T. (2011). Contact stress between railway wheel and rail head analysis with the help of the finite element method. In: Prorail 2011: XX. International Conference "Current problems in Rail Vehicles", Žilina 2011, November 21st-23rd, Slovak Republic, Proceedings, Scientific and technical Society at the University of Žilina. ISBN 978-80-89276-8, pp. 3-16.
    3. GALLIKOVÁ, J., POPROCKÝ, R. (2015). Computer-aided analysis and the consequences of failures of the selected vehicle subsystem. In: TRANSCOM 2015: 11th European conference of young researchers and scientists: Žilina, June 22-24, 2015, Slovak Republic. - Žilina: University of Žilina, 2015. - ISBN 978-80-554-1048-7. - S. 58-63.
    4. GALLIKOVÁ, J., RUMAN, F. (2015). Using of technical diagnostics for an analysis of failure causes and consequences of a selected vehicle. In: Logistyka. - ISSN 1231-5478. - Nr. 4 (2015).
    5. GERLICI, J., LACK, T., HARUŠINEC, J. (2013). The test stand load modulus implementation for the realistic railway operation in the laboratory conditions. In: Manufacturing Technology, Vol. 13, Issue 7, 2013, Pages 444-449. ISSN 1213-2489. Go to original source...
    6. KLIMENDA, F., SKOČILASOVÁ, B. (2015). Rollers vibration of pipe conveyor. In: Manufacturing Technology, Vol. 15, Issue 6, 2015, Pages 991-995. ISSN 1213-2489. Go to original source...
    7. LACK, T., GERLICI, J. (2013). Wheel/rail contact stress evaluation by means of the modified strip method. In: Komunikacie, Vol. 15, Issue 3, 2013, Pages 126-132. ISSN 1335-4205. Go to original source...
    8. SMETANKA, L., GERLICI, J., LACK, T., PELAGIC, Z. (2015). Homogenization of fibers reinforced composite materials for simulation analysis. In: Manufacturing Technology, Vol. 15, Issue 5, 2015, Pages 914-920. ISSN 1213-2489. Go to original source...
    9. SVOBODA, M., SOUKUP, J., JELEN, K., KUBOVÝ, P. (2015). Effect of impacts on human head. In: Manufacturing Technology, Vol. 15, Issue 2, 2015, Pages 226-231. ISSN 1213-2489. Go to original source...
    10. www.zbierka.sk, Zbierka zákonov č. 116/1997 Čiastka 54.
    11. www.allmetal.sk

    Return to the content