Manufacturing Technology 2017, 17(3):374-381 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/3/374

Production of Planetary Mechanism Model Prototype using Additive Method of Rapid Prototyping

Josef Sedlak, Barbora Kudlacova, Oskar Zemcik, Ales Jaros, Martin Slany
Department of Machining Technology, Institute of Manufacturing Technology, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, Brno 616 69, Czech Republic

An article deals with a production of a planetary mechanism model prototype using an additive method of Rapid Prototyping (RP) by a 3D printer called uPrint. The first part of the article contains a theoretical analysis of a main principle and kinematics parameters of the planetary mechanism model. The second part begins with an experimental analysis of a planetary assembly calculation and continues with a description of a production process of all individual mechanism parts and description of the final completing of the planetary mechanism prototype. The final part deals with a characterization of ABS styrene polymers generally used for production printed by uPrint device.

Keywords: Additive Method, Rapid Prototyping, Fused Deposition Modelling, uPrint, Planetary Mechanism, ABS Styrene Polymer

Published: June 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Sedlak J, Kudlacova B, Zemcik O, Jaros A, Slany M. Production of Planetary Mechanism Model Prototype using Additive Method of Rapid Prototyping. Manufacturing Technology. 2017;17(3):374-381. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/3/374.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. KUDLACOVA, B. (2014). Application of Fused Deposition Modelling Method to Production of Planetary Mechanism Model. Brno 2014. Bachelor Thesis. Brno University of Technology, Faculty of Mechanical Engineering, Department of Machining Technology. 66 pp., 5 pp. Appendices. Supervisor doc. Ing. Josef Sedlak, Ph.D.
    2. CHUA, CHEE KAI, KAH FAI LEONG A CHU SING LIM. (2010). Rapid Prototyping: Principles and Applications. 3rd Ed. New Jersey: World Scientific, c2010, 512 p. ISBN 978-981-277-897-0. Go to original source...
    3. DRAPELA, M. (2015). Modul Rapid Prototyping. [Online]. [Seen 18th April 2015]. Available at: http://www.vu.vutbr.cz/digidesign/Moduly/Rapid%20Prototyping%20%20Ing.%20Milosvav%20Dr%C3%A1pela.pdf.
    4. PISKA, M. et al. (2009). Speciální technologie obrábění. 1st Edition Brno: Academic Publishing Company CERM, 2009, 247 pp. ISBN 978-802-144-025-8.
    5. MYNAR, V. (1977). Části strojů: převody. Ostrava: Technical University of Ostrava, 1977, 142 pp.
    6. JAN, Z., ZDANSKY, B., CUPERA, J (2009). Automobily. 2nd Edition. Brno: Avid, 2009, 155 pp. ISBN 978-808-714-312-4.
    7. PRIKRYL, K. (2008). Kinematika. 5th Edition, At Academic Publishing Company CERM 3rd Edition. Brno: Academic Publishing Company CERM, 2008, 142 pp. ISBN 9788021436794.
    8. BOHACEK, F. (1987). Části a mechanismy strojů III. Převody. 2nd Edition. Brno: VUT Brno, 1987, 267 pp.
    9. Planetové převody s přímými a šikmými zuby. MITCalc. [Online]. 2003-2014 [Seen 18th April 2015]. Available at: www.mitcalc.com/doc/gear5/help/cz/gear5.htm.
    10. SHIGLEY, J. E., MISCHKE, CH. R., BUDYNAS, R. G., HARTL, M., VLK, M. (2010). Konstruování strojních součástí. 1st Edition. Brno: VUTIUM, 2010, 1159 pp. ISBN 978-802-142-629-0.
    11. uPrint SE. Stratasys Ltd. [Online]. 2015 [Seen 18th May 2015]. Available at: http://www.stratasys.com/3d-printers/idea-series/uprint-se.
    12. FDM Technology. Stratasys Ltd. [Online]. 2015 [Seen 18th May 2015]. Available at: http://www.stratasys.com/3dprinters/technologies/fdm-technology.
    13. SEDLAK, J., RICAN, D., PISKA, M. (2015). Study of Materials Produced by Powder Metallurgy Using Classical and Modern Additive Laser Technology. Procedia Engineering, 2015. Vol. 2015, No. 1, p. 1232-1241. ISSN 1877-7058. Go to original source...
    14. NOVAK-MARCINCIN, J., JANAK, M., NOVAKOVA-MARCINCINOVA, L. (2012). Increasing of Product Duality Produced by Rapid Prototyping Technology. Manufacturing Technology, 2012. Vol. 12, No. 12, p. 71-75. ISSN 1213-2489. Go to original source...
    15. SEDLAK, J. (2014). Aplikace aditivní technologie pro výrobu prototypových modelů totální endoprotézy kolenního kloubu. Sborník příspěvků Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU. 1st Edition. Ostrava: VSB - TU Ostrava, Faculty of Mechanical Engineering, 2014, p. 1-10. ISBN 978-80-248-3518-1.
    16. SEDLAK, J., PTACKOVA, M., NEJEDLY, J., MADAJ, M., DVORACEK, J., ZOUHAR, J., PISKA, M. (2013). Material Analysis of Titanium Alloy Produced by Direct Metal Laser Sintering. International Journal of Metal Casting, 2013. Vol. 7, No. 2, p. 43-50. ISSN 1939-5981. Go to original source...
    17. SEDLAK, J., SLANY, M., FIALA, Z., JAROS, A. (2015). Production Method of Implant Prototype of Knee-Joint Femoral Component. Manufacturing Technology, 2015. Vol. 15, No. 2, p. 195-204. ISSN 1213-2489. Go to original source...
    18. SOVA, M., KREBS, J. (2001). Termoplasty v praxi. Praha: Verlag Dashöfer, Vol. 2001. ISBN 80-862-2915-7.
    19. BRIMUS, J. (2007). Vliv koncentrované energie laserového paprsku na různé polymerní materiály.[Online]. Vol. 2007 [seen 2016-03-27]. Available at: http://digilib.k.utb.cz/bitstream/handle/10563/4374/brimus_2007_dp.pdf?sequence=1. Diploma thesis. Tomas Bata University in Zlin. Supervisor Libuse Sykorova.
    20. KUO, CHAO-CHUNG, LUNG-CHANG LIU, WEI-FENG TENG, HSIEH-YUNG CHANG, FU-MING CHIEN, SHENG-JU LIAO, WEN-FA KUO A CHIEN-MING CHEN. (2016). Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications. Composites Part B: Engineering. 2016, 86, 36-39. DOI: 10.1016/j.compositesb.2015.10.005. ISSN 13598368. Available at: http://linkinghub.elsevier.com/retrieve/pii/S1359836815005983. Go to original source...

    Return to the content