Manufacturing Technology 2017, 17(4):451-459 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/4/451

Effect of Roller Path on the Formability of Drawing Spinning

Z. R. Han1, Z. Jia1, Y. Xiao2, B. M. Liu1, Z. J. Fan1
1 Key Lab of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process, Shenyang Aerospace University, Shenyang, 110136, China
2 School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, 710072, China

Drawing spinning is widely used for the manufacture of cylinder parts from disk blank. And the roller path can affect its formability strongly. But how does the effect mechanism work is rarely revealed. The plastic of the metal is one key factor for the failure of spinning such as fracture and wrinkling. In order to reveal the relationship between the roller path and the formability, two working conditions with one-pass (Scheme I) and multi-pass (Scheme II) roller path are proposed. And the comparative analysis of their metal flow evolution is carried out by the finite element method. It is found that one-pass roller path isn't conducive to putting down the flange gradually. And this will bring larger deformation resistance to cause cylinder wall fracture and reduce the formability of drawing spinning.

Keywords: Multi-pass roller path, Drawing spinning, Formability, FEM

Published: September 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Han ZR, Jia Z, Xiao Y, Liu BM, Fan ZJ. Effect of Roller Path on the Formability of Drawing Spinning. Manufacturing Technology. 2017;17(4):451-459. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/4/451.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. XIA, Q., XIAO, G., LONG, H,, CHENG, X., SHENG, X. (2014). A review of process advancement of novel metal spinning. In: International Journal of Machine Tools and Manufacture, Vol.85, pp.100-121. Go to original source...
    2. HUANG, L. YANG, H., ZHAN, M. (2008). 3D-FE modeling method of splitting spinning. In: Computational Materials Science, Vol.42, No.4, pp.643-652. Go to original source...
    3. AHMED, K. I., GADALA, M. S., EL-SEBAIE, M. G. (2015). Deep spinning of sheet metals. In: International Journal of Machine Tools and Manufacture, Vol.97, pp.72-85. Go to original source...
    4. BAI, Q., YANG, H., ZHAN, M. (2008). Finite element modeling of power spinning of thin-walled shell with hoop inner rib. In: Transactions of Nonferrous Metals Society of China, Vol.18, No.1, pp.6-13. Go to original source...
    5. ZHAN, M., YANG, H., GUO, J., WANG, X. X. (2015). Review on hot spinning for difficult-to-deform lightweight metals. In: Transactions of Nonferrous Metals Society of China, Vol.25, No.6, pp.1732-1743. Go to original source...
    6. RUSNAKOVA, S., CAPKA, A., FOJTL, L., ZALUDEK, M., RUSNAK, V. (2016). In: Manufacturing Technology, Vol. 16, No.4, pp. 799-804. Go to original source...
    7. ZENG, C., ZHANG, S., XIA, Q., XIE, H. (2014). Research on effect of roller-races and process parameters on multi-pass drawing spinning quality. In: Forging & Stamping Technology, Vol.39, No.1, pp.58-63. (in Chinese)
    8. XIA, Q., SHIMA, S., KOTERA, H., YASUHUKU, D. (2005). A study of the one-path deep drawing spinning of cups. In: Journal of Materials Processing Technology, Vol.159, No.3, pp.397-400. Go to original source...
    9. LIN B, GU J, ZHOU S, JIAN-MIN, G., WANG, D. (2010). Research on multi-process drawing spinning of Q235 and 1060 plates. In: Forging & Stamping Technology, Vol.35, No.4, pp.56-59. (in Chinese)
    10. LIN, B. (2011) Research on Process of Multi-pass Draw-spinning of Hyper-hemispherical Shell. In: Journal of Mechanical Engineering, Vol.47, No.6, pp.86-91. (in Chinese) Go to original source...
    11. TREGLER, M., KEJZLAR, P., PILVOUSEK, T., ANDR©OVÁ, Z., VOLESKÝ, L. (2016). The study of deformation behaviour of DC06 deep drawing steel. In: Manufacturing Technology, Vol. 16, No.1, pp.284-289. Go to original source...
    12. XIA, Q. X., CHENG, X. Q., HU, Y., RUAN, F. (2006). Finite element simulation and experimental investigation on the forming forces of 3D non-axisymmetrical tubes spinning. In: International Journal of Mechanical Sciences, Vol.48, No.7, pp.726-735. Go to original source...
    13. XIA, Q. X., XIE, S. W., HUO, Y. L., RUAN, F. (2008). Numerical simulation and experimental research on the multi-pass neck-spinning of non-axisymmetric offset tube. In: Journal of materials processing technology, Vol.206, No.1, pp.500-508. Go to original source...
    14. JIANG, S. Y., ZHENG, Y. F., REN, Z. Y., LI, C. F. (2009). Multi-pass spinning of thin-walled tubular part with longitudinal inner ribs. In: Transactions of Nonferrous Metals Society of China, Vol.19, No.1, pp.215-221. Go to original source...
    15. JIANG, S. Y., REN, Z. Y., LI, C. F. XUE, K. M. (2009). Role of ball size in backward ball spinning of thin-walled tubular part with longitudinal inner ribs. In: Journal of materials processing technology, Vol.209, No.4, pp.2167-2174. Go to original source...
    16. MIAO, W., LIU, D., SHAO, X. (2014). Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning. In: Journal of Netshape Forming Engineering, Vol.6, No.2, pp.18-22. (in Chinese)
    17. LI, Y., WANG, J., LU, G., PAN, G. (2014). A numerical study of the effects of roller paths on dimensional precision in die-less spinning of sheet metal. In: Journal of Zhejiang University SCIENCE A, Vol.15, No.6, pp.432-446. Go to original source...
    18. WATSON, M., LONG, H. (2014). Wrinkling Failure Mechanics in Metal Spinning. In: Procedia Engineering, Vol.81, pp.2391-2396. Go to original source...
    19. E, D. X. (2007). Forming technology and die. Beijing Institute of Technology Press, Beijing. (in Chinese)

    Return to the content