Manufacturing Technology 2017, 17(5):827-831 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/5/827

Influence of Alloying Elements on Properties of Ni-Ti-X5 Alloys Consolidated by Spark Plasma Sintering

Pavel Salvetr, Andrea Školáková, Filip Průša, Pavel Novák
University of Chemistry and Technology, Department of Metals and Corrosion Engineering, Technicka 5, 166 28 Prague 6, Czech Republic

This paper deals with the preparation of highly dense Ni-Ti alloys with addition of alloying elements like iron, vanadium and zirconium. The alloying elements were added in an amount of 5 wt. % into Ni-Ti46 wt. % powder mixture. The prealloyed NiTiX5 powder was prepared by the self-propagating high-temperature synthesis with following milling of the product. The prealloyed powder was consolidated by spark plasma sintering. The microstructures, mechanical properties and abrasive wear of prepared alloys were investigated. The results were compared with Ni-Ti and NiTiX alloys and other materials prepared by powder metallurgy. The undesirable changes in microstructures (formation of the Ti2Ni and Ni3Ti phases), the increase of hardness and abrasive wear resistance were found during milling and spark plasma sintering.

Keywords: Powder metallurgy, spark plasma sintering, Ni-Ti alloy, mechanical properties, wear resistance

Published: October 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Salvetr P, Školáková A, Průša F, Novák P. Influence of Alloying Elements on Properties of Ni-Ti-X5 Alloys Consolidated by Spark Plasma Sintering. Manufacturing Technology. 2017;17(5):827-831. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/5/827.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. DUERIG, T., PELTON, A., TREPANIER, CH. (2011). Nitinol - PART I Mechanism and Behaviour, In: SMST e-Elastic newsletter, ASM International.
    2. JABUR, A.S., AL-HAIDARY, J.T., AL-HASANI, E.S. (2013). Characterization of Ni-Ti shape memory alloys prepared by powder metallurgy. In: Journal of Alloys and Compounds, Vol. 578, pp. 136-142. Go to original source...
    3. SINA, H., SURREDDI, K.B., IYENGAR, S. (2016). Phase evolution during the reactive sintering of ternary Al-Ni-Ti powder compacts. In: Journal of Alloys and Compounds, Vol. 661, pp. 294-305. Go to original source...
    4. ŠKOLÁKOVÁ, A., NOVÁK, P., SALVETR, P., MORAVEC, H., ŠEFL, V., DEDUYTSCHE, D., DETAVERNIER, C. (2017). Investigation of the effect of magnesium on the microstructure and mechanical properties of NiTi shape memory alloy prepared by self-propagating high-temperature synthesis. In: Metallurgical and Materials Transactions A, Vol. 48, pp. 3559-3569. Go to original source...
    5. ELAHINIA, M.H., HASHEMI M., TABESH, M., BHADURI, S.B. (2012). Manufacturing and processing of NiTi implants: A review. In: Progress in Materials Science, Vol. 57, pp. 911-946. Go to original source...
    6. NOVÁK, P., MEJZLÍKOVÁ, L., MICHALCOVÁ, A., ČAPEK, J., BERAN, P., VOJTĚCH, D. (2013). Effect of SHS conditions on microstructure of NiTi shape memory alloy. In: Intermetallics, Vol. 42, pp. 85-91. Go to original source...
    7. WHITNEY, M., CORBIN, S.F., GORBET, R.B. (2008). Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis. In: Acta Materialia, Vol. 56, pp. 559-570. Go to original source...
    8. NOVÁK, P., MICHALCOVÁ, A., ŠERÁK, J., VOJTĚCH, D., FABIÁN, T., RANDÁKOVÁ, S., PRŮŠA, F., KNOTEK, V., NOVÁK, M. (2009). Preparation of Ti-Al-Si alloys by reactive sintering. In: Journal of Alloys and Compounds, Vol. 470, pp. 123-126. Go to original source...
    9. PRŮŠA, F., VOJTĚCH, D., BLÁHOVÁ, M., MICHALCOVÁ, A., KUBATÍK, T.F., ČÍŽEK, J. (2015). Structure and mechanical properties of Al-Si-Fe alloys prepared by short-term mechanical alloying and spark plasma sintering. In: Materials & Design, Vol. 75, pp. 65-75. Go to original source...
    10. NOVÁK, P., MORAVEC, H., SALVETR, P., PRŮŠA, F., DRAHOKOUPIL, J., KOPEČEK, J., KARLÍK, M., KUBATÍK, T.F. (2015). Preparation of nitinol by non-conventional powder metallurgy techniques. In: Materials Science and Technology, Vol. 31, pp. 1886-1893. Go to original source...
    11. LIU, B., HUANG, S., CHEN, L., VAN HUMBEECK, J., VLEUGELS, J. (2017). Rapid synthesis of dense NiTi alloy through spark plasma sintering of a TiH2/Ni powder mixture. In: Materials Letters, Vol. 191, pp. 89-92. Go to original source...
    12. NOVÁK, P., PRŮŠA, F., ŠERÁK, J., VOJTĚCH, D., MICHALCOVÁ, A. (2010). High-temperature behaviour of Ti-Al-Si alloys produced by reactive sintering. In: Journal of Alloys and Compounds, Vol. 504, pp. 320-324. Go to original source...
    13. NOVÁK, P. (2012). Příprava, vlastnosti a použití intermetalických sloučenin. In: Chemické Listy, Vol. 106, pp. 884-889.
    14. WHITNEY, M., CORBIN, S.F., GORBET, R.B. (2009). Investigation of the influence of Ni powder size on microstructural evolution and the thermal explosion combustion synthesis of NiTi. In: Intermetallics, Vol. 17, pp. 894-906. Go to original source...
    15. NOVÁK, P., VESELÝ, T., MAREK, I., DVOŘÁK, P., VOJTĚCH, V., SALVETR, P., KARLÍK, M., HAUŠILD, P., KOPEČEK, J. (2016). Effect of Particle Size of Titanium and Nickel on the Synthesis of NiTi by TE-SHS. In: Metallurgical and Materials Transactions B, Vol. 47, pp. 932-938. Go to original source...
    16. ZHANG, Z.-H., LIU, Z.-F., LU, J.-F., SHEN, X.-B., WANG, F.-C., WANG, Y.-D. (2014). The sintering mechanism in spark plasma sintering - Proof of the occurrence of spark discharge. In: Scripta Materialia, Vol. 81, pp. 56-59. Go to original source...
    17. NOVÁK, P., ŠKOLÁKOVÁ, A., PIGNOL, D., PRŮŠA, F., SALVETR, P., KUBATÍK, T.F., PERRIERE, L., KARLÍK, M. (2016). Finding the energy source for self-propagating high-temperature synthesis production of NiTi shape memory alloy. In: Materials Chemistry and Physics, Vol. 181, pp. 295-300. Go to original source...
    18. SURYANARAYANA, C. (2001). Mechanical alloying and milling. In: Progress in Materials Science, Vol. 46, pp. 1-184. Go to original source...
    19. NOVÁK, P., VOJTĚCH, D., ŠERÁK, J. (2006). Wear and corrosion resistance of a plasma-nitrided PM tool steel alloyed with niobium. In: Surface and Coatings Technology, Vol. 200, pp. 5229-5236. Go to original source...
    20. SALVETR, P., KUBATIK, T.F., NOVÁK, P. (2016). Preparation of Ni-Ti shape memory alloy by spark plasma sintering method. In: Manufacturing Technology, Vol. 16, pp. 804-808. Go to original source...
    21. SALVETR, P., NOVÁK, P., MORAVEC, H. (2015). Ni-Ti alloys produced by powder metallurgy. In: Manufacturing Technology, Vol. 15, pp. 689-694. Go to original source...
    22. ŠKOLÁKOVÁ, A., NOVÁK, P., SALVETR, P. (2016). Influence of elements with high affinity to oxygen on microstructure and phase composition of Ni-Ti alloy. In: Manufacturing Technology, Vol. 16, pp. 808-814. Go to original source...
    23. SALVETR, P., ŠKOLÁKOVÁ, A., NOVÁK, P. (2016). Changes in microstructure and properties of ni-ti alloy after addition of ternary alloying element. In: Manufacturing Technology, Vol. 16, pp. 1359-1363. Go to original source...
    24. KRISTIANOVÁ, E., NOVÁK, P. (2016). Composite materials NiTi-Ti2Ni, In: Manufacturing Technology, Vol. 16, pp. 961-965. Go to original source...
    25. NOVÁK, P., MAREK, I., MEJZLÍKOVÁ, L., MICHALCOVÁ, A., VOJTĚCH, D. (2012). Reactive-sintering production of intermetallics. In: Materials and Technology, Vol. 46, pp. 559-562.

    Return to the content