Manufacturing Technology 2018, 18(1):29-34 | DOI: 10.21062/ujep/48.2018/a/1213-2489/MT/18/1/29

The GRR a Fundamental Tool for Dealing with Measurement System Variability

Milan Dian, Lubomír Hodinář
Faculty of Mechanical Engineering, UJEP in Ústí nad Labem, Pasteurova 3334/7, 400 96 Ústí nad Labem, Czech Republic

With increasing complexity of machinery and products manufacturing the strict requirements for quality and, reliability of the measurement equipment and systems plays significant role in production system and quality assurance in terms of customer satisfaction. In nowadays automotive industry in connection to ISO/TS 16949:2009 there has been observed a strong confrontation with request for proof of suitability for use of selected gauges for a specific operations. An appropriate methodology allowing to determine a gauge the most suitable for a given operation is Gauge Reproducibility and Repeatability study (GRR or R&R). The GRR takes into a consideration the variability of produced parts, operator`s approach, and whole measurement system. The article deals with a description and the adequate methodology, and the experimental implementation of GRR in manufacturing quality process assurance in order to set up and continuously improve the quality level in automotive parts production.

Keywords: quality assurance, measurement variability, GRR, R&R, MSA

Published: February 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Dian M, Hodinář L. The GRR a Fundamental Tool for Dealing with Measurement System Variability. Manufacturing Technology. 2018;18(1):29-34. doi: 10.21062/ujep/48.2018/a/1213-2489/MT/18/1/29.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. DIAN, M. (2013). The Methodology of Quality Matrix in Manufacturing Quality Process Improvement. Manufacturing Technology. Vol. 13, No. 4, pp. 431-437. ISSN 1213-2489. Go to original source...
    2. APQP (2009). Advanced Product Quality Planning. ČSJ, Praha. ISBN 978-80-02-02142-1.
    3. ISO/TS 16949:2009. (2009). Systémy managementu kvality - zvláštní požadavky na používání ISO 9001:2008 v organizacích zajišťujících sériovou výrobu a výrobu náhradních dílů v automobilovém průmyslu. ČSJ, Praha. ISBN 978-80-02-02176-6.
    4. ISO 9001:2016.
    5. NĚMEČEK, P. (2008). Nejistoty měření. CSJ, Praha. ISBN 978-80-02-02089-9.
    6. FABIAN, F., HORALEK, V., KREPELA, J., MICHALEK, J., CHMELIK V., CHODOUNSKY, V., KRAL, J. (2008). Statistické metody řízení jakosti. ČSJ, Praha. ISBN 978-80-02-01897-1.
    7. PETRAŠOVÁ, I. (2011). Analýza systému měření (MSA). ČSJ, Praha. ISBN 978-80-02-02323-5.
    8. http://www.trestik.cz/msa-rar.
    9. HODINÁŘ, L. (2013). Dotykové a bezdotykové měření rozměrů pro průmyslové aplikace. Bakalářská práce, Univerzita J. E. Purkyně, FVTM, Ústí nad Labem.
    10. LEGÁT, V., ALEŠ, Z., HLADÍK, T. (2017). Maintenance Audit: the Tool for Maintenance Management Quality ofnManufacturing Equipment. In Manufacturing Technology, Vol. 17, No. 1, pp. 53-62. ISSN 1213-2489. Go to original source...
    11. RAZ, K., ZAHALKA, M., CHVAL, Z. (2017). Injection Molding Quality Improvement by Advanced Virtual Simulations. In Manufacturing Technology, Vol. 17, No. 1, pp. 79-83. ISSN 1213-2489. Go to original source...
    12. PECHÁČ, P., SÁGA, M., SMETANKA, L., (2017). Močilan, M. Generating Random Pattern for Homogenization of Fiber Reinforced Composites Using Memetic Algorithm. In Manufacturing Technology, Vol. 17, No. 3, pp. 354-360. ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content