Manufacturing Technology 2018, 18(2):194-200 | DOI: 10.21062/ujep/77.2018/a/1213-2489/MT/18/2/194

Dimensional Calculation of Automatic Soldering Station Chain Conveyor's Electric Motor

Miroslav Blatnický, Ján Dižo, Pavol Kurčík, Mária Blatnická
Faculty of Mechanical Engineering, University of Žilina. Univerzitná 8215/1, 010 26 Žilina. Slovakia

The paper deals with a design of required electric motor power for the conveyor line. This machine will serve for automatic soldering of a compressor outlet piping in a real company. The calculation of the motor is necessary to ensure a required handling of pallets with the compressors, i.e. between individual working positions. These positions consist of manual loading components on the line, automatic soldering and manual tightness control. After determining the power of the drive motor, it will be possible to produce a real prototype. The designed electric motor will be integrated into the machine and that will demonstrate the correctness of all design suggestions and calculations including the dimensional calculation of the drive motor in conjunction with the customer's technical standards requirements.

Keywords: Chain conveyor, soldering station, dimensional calculation, electric motor

Published: April 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Blatnický M, Dižo J, Kurčík P, Blatnická M. Dimensional Calculation of Automatic Soldering Station Chain Conveyor's Electric Motor. Manufacturing Technology. 2018;18(2):194-200. doi: 10.21062/ujep/77.2018/a/1213-2489/MT/18/2/194.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BARAN, P., BREZÁNI, M., KUKUČA, P., ŠŤASTNIAK, P. (2017) Basic dynamical analysis and comparison of balancing systems of non-conventional piston machine FIK. In: Proceedia Engineering, Vol. 192, pp. 34-39, ISSN 1877-7058. Go to original source...
    2. CHUDZIKIEWICZ, A., BOGACZ, R., KOSTRZEWSKI, M. (2014) Using acceleration signals recorded on a railway vehicle wheelsets for rail track condition monitoring. In: Proceedings of the 7th European Workshop on Structural Health Monitoring, EWSHM 2014, (Le Cam, Vincent and Mevel, Laurent and Schoefs, Franck, (Ed.)), pp. 167-174. Nantes, France.
    3. CHUDZIKIEWICZ, A., MELNIK, R. (2012) Statistical analysis of vibration for the rail vehicle suspension monitoring system. Proceedings of the Mini Conference on Vehicle System Dynamics, Identification and Anomalies, VSDIA 2012, (I. Zobory, (Ed.)), pp. 261-269. Budapest: Budapest University of Technology and Economisc.
    4. GERLICI, J., LACK, T. (2014) Rail vehicles brake components test bench utilisation. In: Applies Mechanics and Materials, Vol. 486, pp. 379-386, ISSN 1660-9336. Go to original source...
    5. GERLICI, J., LACK, T. (2014) Modified HHT method for vehicle vibration analysis in time domain utilisation. In: Applies Mechanics and Materials, Vol. 486, pp. 396-405, ISSN 1660-9336. Go to original source...
    6. GERLICI, J., LACK, T. (2009) Iterative method for railway wheel profile design. In: Komunikacie, Vol. 11, No. 2, pp. 49-56, ISSN 1335-4205. Go to original source...
    7. GERLICI, J., LACK, T., HARUŠINEC, J. (2014) Realistic simulation of railway operation on the RAILBCOT test stand. In: Applied Mechanics and Materials, Vol. 486, pp. 387-395, ISSN 1660-9336. Go to original source...
    8. GERLICI, J., LACK, T., KADOROVA, M. (2004) Calculation of the equivalent conicity function of the railway wheelset tread profile at the delta R function with a negative slope. In: Komunikacie, Vol. 6, No. 2, pp. 49-56, ISSN 1335-4205. Go to original source...
    9. GRENČÍK, J., RUMAN, F. (2015) Proposal of new maintenance scheme of air brake system on semi-trailer combination. In: Diagnostyka, Vol. 16, No. 2, pp. 11-19, ISSN 1641-6414.
    10. HARUŠINEC, J., MAŇUROVÁ, M., SUCHÁNEK, A. (2016) Optimalization of a brake unit in terms of control range. In: Manufacturing Technology, Vol. 16, No. 5, pp. 917-923, ISSN 1213-2489. Go to original source...
    11. HAUSER, V., NOZHENKO, O. S., KRAVCHENKO, K. O., LOULOVÁ, M., GERLICI, J., LACK, T. (2017) Impact of wheelset steering and wheel profile geometry to the vehicle behaviour when passing curved track. In: Manufacturing Technology, Vol. 17, No. 3, pp. 306-312, ISSN 1213-2489. Go to original source...
    12. HAUSER, V., NOZHENKO, O. S., KRAVCHENKO, K. O., LOULOVÁ, M., GERLICI, J., LACK, T. (2017) Proposal of a mechanism for setting bogie wheelsets to radial position while riding along track curve. In: Manufacturing Technology, Vol. 17, No. 2, pp. 186-192, ISSN 1213-2489. Go to original source...
    13. KOSTRZEWSKI, M. (2012) Logistics facilities designing method - a study of a procedure for logistics facilities designed and its OL09 software implementation. In: Archives of Transport, Vol. 24, No. 3, pp. 321-340, ISSN 0866-9546.
    14. LACK, T., GERLICI, J. (2012) Wheel-rail contact stress evaluation by means of the modified strip method utilization. In: Proceedings of the Mini Conference on Vehicle System Dynamics, Identification and Anomalies, VSDIA 2012, (I. Zobory, (Ed.)), pp. 261-269. Budapest: Budapest University of Technology and Economisc.
    15. LACK, T., GERLICI, J. (2016) Tangential stresses for non-elliptical contact patches computed by means of a modified FASTSIM method. In: Civil-Comp Proceedings, Vol. 110, No. 1, 10 pages, ISSN 1759-3433. Go to original source...
    16. LEITNER, B. (2013) Discrete optimization of the rail vehicle frame weight with respect to fatigue damage cumulation process. In: Proceedings of the 17th International Conference Transport means 2013, Kaunas, Lithuania.
    17. LOULOVÁ, M., SUCHÁNEK, A., HARUŠINEC, J. (2017) Evaluation of the parameters affecting passenger riding comfort of a rail vehicle. In: Manufacturing Technology, Vol. 17, No. 2, pp. 224-231, ISSN 1213-2489. Go to original source...
    18. MAŇUROVÁ, M., SUCHÁNEK, A. (2016) The analysis of a rail vehicle with a tilting bogie. In: Manufacturing Technology, Vol. 16, No. 5, pp. 1020-1027, ISSN 1213-2489. Go to original source...
    19. MELNIK, R., KOZIAK, S. (2017) Rail vehicle suspension condition monitoring - approach and implementation. In: Journal of Vibroengineering, Vol. 19, No. 1, pp. 487-501, ISSN 1392-8716. Go to original source...
    20. RUŽBARSKÝ, J., MAJERNÍK, R. (2017) Theoretical regulation of delimitation of metal level decrease in the furnace in case of pneumatic dosing device of metal. In: Manufacturing Technology, Vol. 17, No. 1, pp. 84-86, ISSN 1213-2489. Go to original source...
    21. SKOČILASOVÁ, B., SKOČILAS, J. (2015) Solidification of the aluminium alloy in the mold. In: Manufacturing Technology, Vol. 15, No. 5, pp. 909-914, ISSN 1213-2489. Go to original source...
    22. SMETANKA, L., GERLICI, J., LACK, T., PELAGIC, Z. (2015) Homogenization of fibers reinforced composite materials for simulation analysis. In: Manufacturing Technology, Vol. 15, No. 5, pp. 914-920, ISSN 1213-2489. Go to original source...
    23. SMETANKA, L., ŠŤASTNIAK, P. (2017) Analysis of contact stresses of theoretical and worn profile by using computer simulation. In: Manufacturing Technology, Vol. 17, No. 4, pp. 580-585, ISSN 1213-2489. Go to original source...
    24. ŠŤASTNIAK, P., SMETANKA, L., MORAVČÍK, M. (2017) Development of modern railway bogie for broad track gauge - Bogie frame assessment. In: Manufacturing Technology, Vol. 17, No. 2, pp. 250-256, ISSN 1213-2489. Go to original source...
    25. STEIŠŪNAS, S., BUREIKA, G. (2014) Study of freight wagon running dynamic stability taking into account the track stiffness variation. In: Transport problems, Vol. 9, No. 4, pp. 131-143, ISSN 1896-0596.
    26. SUDA, Y., GRENCIK, J. (1996) The mechanism of enhanced curving performance of unsymmetric suspension trucks under action traction/brake torque. In: Vehicle system Dynamics, Vol. 25, No. SUPPL., pp. 629-640, ISSN 0042-3114. Go to original source...
    27. SVOBODA, M., SOUKUP, J., JELEN, K., KUBOVÝ, P. (2015) Effect of impact on human head. In: Manufacturing Technology, Vol. 15, No. 2, pp. 226-231, ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content