Manufacturing Technology 2018, 18(3):411-417 | DOI: 10.21062/ujep/114.2018/a/1213-2489/MT/18/3/411

Preparation of Porous Biomaterial Based on Ti-Si Alloys

Anna Knaislová, Pavel Novák
Department of Metals and Corrosion Engineering, University of Chemistry and Technology Prague. Technická 5, 166 28 Prague. Czech Republic

Porous titanium-based alloys are very promising materials for medical implants due to their low density and easy osseointegration. In addition, proper porosity and pore size allow adjusting the mechanical properties of implants to values closer to human bone. The aim of this work is to prepare porous metallic biomaterials based on Ti-Si alloys with defined porosity for surgical and dental applications. Alloys were prepared by powder metallurgy using reactive sintering. Best results reached TiSi5 and TiSi10 alloys. The TiSi5 alloy contains smaller pores and achieves lower porosity values. This alloy also has the highest yield strength in compression from these alloys. On the other hand, the TiSi10 alloy is more porous and it is likely to be more suitable for osseointegration.

Keywords: Biomaterial, Porosity, Osseointegration

Published: June 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Knaislová A, Novák P. Preparation of Porous Biomaterial Based on Ti-Si Alloys. Manufacturing Technology. 2018;18(3):411-417. doi: 10.21062/ujep/114.2018/a/1213-2489/MT/18/3/411.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. OH, I.-H., NOMURA, N., MASAHASHI, N.,HANADA, S. (2003). Mechanical properties of porous titanium compacts prepared by powder sintering. In: Scripta Materialia 49, 1197-1202. Go to original source...
    2. SZMUKLER-MONCLER, S.,DUBRUILLE, J. H. (1990). Is osseointegration a requirement for success in implant dentistry? In: Clinical Materials, Vol. 5, No. 2-4, pp. 201-208. Go to original source...
    3. VITERI, V. S. d.,FUENTES, E. (2013). Titanium and Titanium Alloys as Biomaterials.
    4. KEAVENY, T. M., MORGAN, E. F., NIEBUR, G. L.,YEH, O. C. (2001). Biomechanics of trabecular bone. In: Annu Rev Biomed Eng, Vol. 3, No. 307-333. Go to original source...
    5. COOPER, D. M. L., MATYAS, J. R., KATZENBERG, M. A.,HALLGRIMSSON, B. (2004). Comparison of Microcomputed Tomographic and Microradiographic Measurements of Cortical Bone Porosity. In: Calcified Tissue International, Vol. 74, No. 5, pp. 437-447. Go to original source...
    6. FIGUEIREDO DE MAGALHAES, M., NETO FERREIRA, R. A., GROSSI, P. A., DE ANDRADE, R. M. (2008). Measurement of thermophysical properties of human dentin: effect of open porosity. In: J Dent, Vol. 36, No. 8, pp. 588-594. Go to original source...
    7. MOUR, M., DAS, D., WINKLER, T., HOENIG, E., MIELKE, G., MORLOCK, M. M.,SCHILLING, A. F. (2010). Advances in Porous Biomaterials for Dental and Orthopaedic Applications. In: Materials, Vol. 3, No. 5, pp. 2947-2974. Go to original source...
    8. TAKEMOTO, M., FUJIBAYASHI, S., NEO, M., SUZUKI, J., KOKUBO, T.,NAKAMURA, T. (2005). Mechanical properties and osteoconductivity of porous bioactive titanium. In: Biomaterials, Vol. 26, No. 30, pp. 6014-6023. Go to original source...
    9. VOJTĚCH, D., KUBÁSEK, J.,VODĚROVÁ, M. (2012). Structural, mechanical and in vitro corrosion characterization of as-cast magnesium based alloys for temporary biodegradable medical implants. In: Manufacturing technology, Vol. 12, No. 13, pp. 285-292. Go to original source...
    10. LONG, M.,RACK, H. J. (1998). Titanium alloys in total joint replacement-a materials science perspective. In: Biomaterials, Vol. 19, No. 18, pp. 1621-1639. Go to original source...
    11. NOVÁK, P., SITA, L., KNAISLOVÁ, A.,VOJTĚCH, D. (2012). Powder metallurgy preparation of porous titanium for medical implants. In: Metal
    12. GEETHA, M., SINGH, A. K., ASOKAMANI, R.,GOGIA, A. K. (2009). Ti based biomaterials, the ultimate choice for orthopaedic implants - A review. In: Progress in Materials Science, Vol. 54, No. 3, pp. 397-425. Go to original source...
    13. NOVÁK, P., MICHALCOVÁ, A., MAREK, I., VODĚROVÁ, M.,VOJTĚCH, D. (2012). Possibilities of the observation of chemical reactions during the preparation of intermetallics by reactive sintering. In: Manufacturing Technology, Vol. 12, No. 13, pp. 197-201. Go to original source...
    14. KNAISLOVÁ, A., ©IMŮNKOVÁ, V., NOVÁK, P., PRŮ©A, F., CYGAN, S.,JAWORSKA, L. (2017). The optimization of sintering conditions for the preparation of Ti-Al-Si alloys. In: Manufacturing Technology, Vol. 17, No. 4, pp. 483-488. Go to original source...
    15. KNAISLOVÁ, A., PETERKA, M., NOVÁK, P.,VOJTĚCH, D. (2013). Porous Ti-Si Alloys for Implants. In: Manufacturing technology, Vol. 13, No. 3, pp. 330-333. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content