Manufacturing Technology 2018, 18(3):462-465 | DOI: 10.21062/ujep/122.2018/a/1213-2489/MT/18/3/462

Numerical Simulation of Cold Rolled Steel Sheet Metal during Blanking Process

Peter Pecháč, Milan Sága, Milan Sapieta
Faculty of Mechanical Engineering, Univerzity of Zilina. Unierzitna 1, 010 26 Zilina. Slovak Republic

This paper presents numerical simulation of blanking process using finite element method and comparison of results obtained by analytical solution commonly used in engineering practice. The problem was modeled using axial symmetry. Experimental measurement was used to create multi-linear plastic material model. Results of numerical simulation were used to create history of blanking force vs. tool displacement.

Keywords: Blanking process, numerical, sheet metal

Published: June 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Pecháč P, Sága M, Sapieta M. Numerical Simulation of Cold Rolled Steel Sheet Metal during Blanking Process. Manufacturing Technology. 2018;18(3):462-465. doi: 10.21062/ujep/122.2018/a/1213-2489/MT/18/3/462.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BLATNICKÝ, M., ©TAUDEROVÁ, M., DI®O, J. (2017). Numerical Analysis of the Structure Girder for Vehicle Axle Scale Calibration, In: Procedia Engineering, 177, pp. 510-515. Go to original source...
    2. KOPAS, P., JAKUBOVIČOVÁ, L., VA©KO, M., HANDRIK, M. (2016). Fatigue resistance of reinforcing steel bars, In: Procedia Engineering, 136, pp. 193-197. Go to original source...
    3. ADAMUS, J., LACKI, P., WIECKOWSKI, W. (2011). Numerical simulation of the fine blanking process of sheet titanium, In: Archives of Metallurgy and Materials, 56 (2), pp. 431-438. Go to original source...
    4. HANDRIK, M., VA©KO, M., KOPAS, P., MÓZER, V. (2016). The linear and nonlinear stability loss of structures due to thermal load, In: Procedia Engineering, 136, pp. 359-364. Go to original source...
    5. NOVAK, P., DEKYS, V. (2015). Induction heating of inner rolling bearing ring in ANSYS, In: Manufacturing Technology, Vol. 15, No. 5, pp. 881-885. Go to original source...
    6. ®MINDÁK, M., NOVÁK, P., DEKÝ©, V. (2017). Analysis of bond behaviour in strengthened reinforced concrete beam with carbon fiber reinforced polymer lamella, In: MATEC Web of Conferences, 107, art. no. 00045. Go to original source...
    7. SAPIETA, M., SAPIETOVA, A., DEKYS, V. (2017). Comparison of the thermoelastic phenomenon expressions in stainless steels during cyclic loading, In: Metalurgija, 56 (1-2), pp. 203-206.
    8. SVOBODA, M., SOUKUP, J. (2013). Dynamic Measurement of Four-Axle Railway Wagon. In: Manufacturing Technology, Vol. 13, No. 4 pp. 552-558. Go to original source...
    9. SVOBODA, M., SOUKUP, J. (2013). Verification of Numeric Solution by Experiment for Examination Vertical Oscillation of a Mechanical System. In: Manufacturing Technology, Vol. 13, No. 4, pp. 559-563. Go to original source...
    10. BITTNER, V., TUČEK, R., PANSKÁ, ©., SVOBODA, M., JELEN K. (2017). Using the Fourier Transform in the Analysis of Vibration Load Tests of Heterogeneous Mechanical Systems. In: Manufacturing Technology, Vol 17, No. 6, pp. 839-841. Go to original source...
    11. ASTARITA, A., PRISCO, U. (2017). Tensile Properties of a Hot Stretch Formed Ti-6Al-4V Alloy Component for Aerospace Applications. In: Manufacturing Technology, Vol. 17, No. 2, pp. 141-147. Go to original source...
    12. KOVÁCS, G. (2016). Productivity Improvement of Assembly Lines by Lean Methods. In: Manufacturing Technology, Vol. 17, No. 2, pp. 192-197. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content