Manufacturing Technology 2018, 18(4):600-604 | DOI: 10.21062/ujep/145.2018/a/1213-2489/MT/18/4/600

The Potential for Heat Treating Cemented Carbides

Antonín Kříž, David Bricín, Vojtěch Průcha
Faculty of Mechanical Engineering, University of West Bohemia in Pilsen. , Univerzitní 22, 30614 Plzeň. Czech Republic

The focus at the outset was on nothing more than cryogenic treatment of cemented carbides. Then, in relation to additional findings arising from heating of cemented carbides, this paper was expanded to include the results of heat treatment and the behaviour at elevated temperatures. Although heat treatment is applied to diverse materials, no profound study of heat treatment has been dedicated to cemented carbides. This is despite the fact that both cryogenic treatment and heating to elevated temperatures have been proven to cause changes in their properties. Not all these changes are favourable. If precisely-defined rules are not followed, the changes may be adverse. The interest in heat treatment of cemented carbide has been very low. This paper not only provides comprehensive information on the properties of heat-treated cemented carbides but also presents the processes which take place in cemented carbides under load.

Keywords: Cemented Carbides, WC-Co, Heat Treatment, Cryogenic Treatment, Wear

Published: September 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kříž A, Bricín D, Průcha V. The Potential for Heat Treating Cemented Carbides. Manufacturing Technology. 2018;18(4):600-604. doi: 10.21062/ujep/145.2018/a/1213-2489/MT/18/4/600.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. KŘÍŽ, A., ŠPIRIT, Z. (2013). Vlastnosti slinutých karbidů po tepelném zatěžování. Praha: ATZK, 2013, s. 24-30.
    2. KŘÍŽ, A., BRICÍN, D., JANEČEK J. (2015). Změny vybraných vlastností slinutých karbidů v důsledku teplotního zatížení. Praha: ATZK, 2015, s. 58-65.
    3. UPADHYAYA, G. (1999). Cemented Tungsten Carbides: Production, Properties and Testing.1 edition. ed. William Andrew; 1999. 420 p. ISBN:0-8155-1417-4
    4. JANEČEK, J. (2015).Corrosion properties of sintered carbides [thesis]. Pilsen: University of West Bohemia, Faculty of Mechanical Engineering; 2015. 85 p. Available from: https://portal.zcu.cz/stag?urlid=prohlizeni-prace-detail≺aceIdno=63342
    5. KATHERIN, M. (2002). Grundlagen der beschichtung. In: Kundenseminar Ceratizit; Ceratizit; 2002.
    6. ŠPIRIT, Z. (2013). Selected properties and cutting tool applications of sintered carbides. [thesis]. Pilsen: University of West Bohemia, Faculty of Mechanical Engineering; 2013. 90 p. Available from: https://portal.zcu.cz/stag?urlid=prohlizeni-prace-detail≺aceIdno=52610
    7. HUMÁR, A. (2008). Materiály pro řezné nástroje. MM publishing. 2008. 235 p. ISBN: 8025422502
    8. KŘÍŽ, A., ŠPIRIT, Z. (2013). Degradation of cemented carbides under thermal stress. Žilina, 2013. Konference Degradácia konštrukčných materiálov 2013.
    9. VOITOVICH, V. B., SVERDEL, V. V., VOITOVICH, R. F., GOLOVKO, E. I. (1996). Oxidation of WC-Co, WC-Ni and WC-Co-Ni Hard Metals in the Temperature Range 500-800°C. Metals& Hard Materials 14, Elsevier Science, 1996, s. 289-295. Go to original source...
    10. CAMPO, L., PÉREZ-SÁEZ, R.B., GONZÁLEZ-FERNÁNDEZ, L., TELLO, M.J. (2009). Kinetics inversion in isothermal oxidation of uncoated WC-based carbides between 450 and 800 °C. Corrosion Science 51, Elsevier Science, 2009, s. 707-712. Go to original source...
    11. PALÁN, J. (2015). Měření zbytkových napětí povrchů ve vazbě na technologii přípravy. [thesis]. PLZEŇ: ZÁPADOČESKÁ UNIVERZITA, FAKULTA STROJNÍ; 2015. 80
    12. DHANDE, S. T., KANE, V. A., GOGTE, L. T. (2014). Cryogenic Treatment of Tungsten Carbide Tools: Review. International Journal of Science and Research (IJSR) Volume 3 Issue 11, November 2014 ISSN: 2319-7064
    13. JAGADEESH, H. N., AJAYKUMAR, B. S., GOWDA, CH. T., NIKHIL J., NIKITH S. (2015). Effect Of Deep-Cryogenic Treatment On Coated Cemented Carbide Turning Inserts. International Journal of Manufacturing and Mechanical Engineering Volume 1, Number 1 (2015), pp. 15-21.
    14. KALSI, N. S., SEHGAL, R., SHARMA, V.S. (2014). Effect of tempering after cryogenic treatment of tungsten carbide-cobalt bounded inserts. Bull. Mater. Sci., Vol. 37, No. 2, April 2014, pp. 327-335. Go to original source...
    15. PETRU, J., ZLAMAL, T., MRKVICA R. C. (2014). The Effect of Thermal Shocks on Wear of Exchangeable Sintered Carbide Inserts during the Cutting Process, Manufacturing Technology Volume 14, Number 4 (2014), pp.590-596 Go to original source...
    16. PITRMUC, Z., RÁZEK, V., BERÁNEK, J., VRABEC, M., ŠIMOTA, J. (2016). Importance and Methods of Residual Stress Profile Measurement, Manufacturing Technology Volume 16, Number 3 (2016), pp.590-595 Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content