Manufacturing Technology 2018, 18(5):799-804 | DOI: 10.21062/ujep/180.2018/a/1213-2489/MT/18/5/799
Mesocomposites Based on the Polymethylmethacrylate Matrix
- J.E Purkyně University in Ústí nad Labem, Faculty of Mechanical Engineering, Ústí nad Labem, Czech Republic
This article describes the formation of a composite coating in a polymer matrix on an aluminum alloy. It is a PMMA coating (polymethylmethacrylate) with the addition of TiO2 particles. Working with these particles requires not only safety but also a suitable preparation process to obtain particles of suitable size, their subsequent homogeneous distribution in the coating (particles of this size are influenced by electrostatically attractive forces and have a strong tendency to aggravate). The first part describes the material used, sample preparation and coating process, surface roughness measurement, SEM and EDS analysis of selected samples. The aim of the research is to find out whether it is possible to use dipping and brushing techniques when coating Al-Si alloys with polymeric materials. Consequently, what can be achieved is the roughness of the surface of the coated part compared to the uncoated surface (at different particle concentrations in the spin) and the distribution of TiO2 particles on the surface of the sample.
Keywords: Mesoparticles, coating, TiO2, PMMA, surface roughness
Published: October 1, 2018 Show citation
References
- R. HORKÝ (2018). Návrh nanokompozitních povlaků v polymerní matrici a jejich vliv na vlastnosti povrchu. Univerzita J. E. Purkyně v Ústí nad Labem, Ústí nad Labem, (2018)
- NOVOTNY, J., JASKEVIC, M. (2015). Morphology and producing of TiO2 particles, Engineering for Rural Development, 2016 Vol. 15, Latvia, 2015, ISSN 16913043
- J. NOVOTNÝ, M. JASKEVIČ, J. CAIS, T. D. HUNG (2016). The shape and structure of titanium dioxide nanoparticles. In Manufacturing Technology, Vol. 16, No. 5, pp. 1102-1106 (2016)
Go to original source... - VALAŠEK, P., MULLER, M. (2012). Polymeric particle composites with filler saturated matrix. Manufacturing Technology, Ústí nad Labem 2012 Voume 12. ISSN 1213-2489 Go to original source...
- MÜLLER, M. (2017). Effects of Aluminium Microparticles and Surface Treatment of AlCu4Mg on Mechanical Properties of Adhesive Bond Strength, In Manufacturing Technology, Vol. 17, No. 1, FVTM UJEP, Ústí nad Labem, pp. 66-71. ISSN 1213-2489 Go to original source...
- LYSONKOVA, I., NOVOTNY, J.,CAIS, J., MICHNA, S. (2017). Effect of addition of nanoparticles TiO2 into PTFE coating, In Engineering for Rural Development, 2017 Vol. 16, Latvia, pp. 26-30, 2017, ISSN 1691-5976 Go to original source...
- L. BĚHÁLEK, Polymery. [online], https://publi.cz/books/180/18.html
- WEISS, V., STRIHAVKOVA, E. (2012). Influence of the homogenization annealing on microstructure and mechanical properties of AlZn5,5Mg2,5Cu1,5 alloy. Manufacturing Technology, Ústí nad Labem 2012 Voume 12. ISSN 1213-2489 Go to original source...
- SURYANARAYANA, C. (2001). Mechanical alloying and milling, Department of Metallurgical and Materials Engineering, Colorado School of Mines, Golden, USA, 2001. ISBN 978-0-8247-4103-7.
- BHUSHAN, B. (2003). Springer handbook of nanotechnology, Springer, 2003. ISBN 978-3-642-02525-9.
- GIACOVAZZO, C. (2002). Fundamentals of Crystallography, Oxford University Press, USA 2002.
- KEJZLAR, P. (2012). Structure and mechanical properties of Fe-25Al-5Zr and Fe-30Al-5Zr intermetallic alloys. Manufacturing Technology, Ústí nad Labem 2012 Voume 12. ISSN 1213-2489 Go to original source...
- BRECHIGNAC, C., HOUDY, P., LAHMANI M. (2007). Nanomaterials and Nanochemistry, Springer, 2007. ISBN 978-3-540-72992-1 Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.