Manufacturing Technology 2018, 18(6):912-916 | DOI: 10.21062/ujep/200.2018/a/1213-2489/MT/18/6/912

The Heat Treatment Impact on Material Properties of 34CrNiMo6 Steel

Mariana Janeková, Daniela Koštialiková, Andrej Dubec, Matej Burget, Františka Pešlová
Faculty of Industrial Technology in Púchov, Alexander Dubček University of Trenčín, I. Krasku 491/30, Púchov 020 01 Púchov, Slovakia

An article deals with the assessment of the heat treatment of the material for a particular machine component. This material is 34CrNiMo6, made of two melts. This steel belongs to a group of materials with special properties for working at higher temperatures and for the production of demanding components, turbine wheels, cardan shafts, toothed wheels. The material was evaluated for microstructure quality before and after heat treatment. Based on metallographic microstructures, it is possible to review the heat treatment mode, which subsequently affects the mechanical properties of the components. For a particular design element, better cast material was recommended based on a comprehensive evaluation.

Keywords: Heat Treatment, Microstructure, Melt, Steel, Fracture

Published: December 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Janeková M, Koštialiková D, Dubec A, Burget M, Pešlová F. The Heat Treatment Impact on Material Properties of 34CrNiMo6 Steel. Manufacturing Technology. 2018;18(6):912-916. doi: 10.21062/ujep/200.2018/a/1213-2489/MT/18/6/912.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. DAŇA, M., ZETEK, M., SCHORNÍK, V (2017). Cutting Tool Life when Tapping Nickel Based Super Alloy, Manufacturing Technology, No. 1, Vol. 17, (2017) ISSN 1213-2489, p 18-23. Go to original source...
    2. KEJZLAR, P., MACHUTA, J., NOVÁ (2017). Comparison of the Structure of CuZn40MnAl Alloy Casted into Sand and Metal Moulds. Manufacturing Technology, No. 1, Vol. 17, (2017) ISSN 1213-2489, p 44-48. Go to original source...
    3. LÉGÁT, V., ALEŠ, Z., HLADÍK, T. (2017).Maintenance Audit: the Tool for Maintenance Management Quality of Manufacturing Equipment. Manufacturing Technology, No. 1, Vol. 17, (2017) ISSN 1213-2489, p 53-62. Go to original source...
    4. MAJERNÍK, J., KMEC,J., KARKOVÁ, M. (2017).Analysis of the Impact of the Construction of a Gate on the Macroscopic Structure of a Casting and Its Influence on the Mechanical Properties of Castings. Manufacturing Technology, No. 1, Vol. 17, (2017) ISSN 1213-2489, p 62-66. Go to original source...
    5. STUDENÝ, Z., DOBROCKÝ, D., POKORNÝ, Z. (2017).Importance of Diffusion Process on the Fatigue Life of Steel.Manufacturing Technology, No. 1, Vol. 17, (2017) ISSN 1213-2489, p 94-99. Go to original source...
    6. ZETEK, M., ZETKOVÁ, I (2017).Influence of the Workpice Quality on the Cutting Tool Life when Gear Wheel are Machined. Manufacturing Technology, No. 1, Vol. 17, (2017) ISSN 1213-2489, p 121-125. Go to original source...
    7. HLUCHÝ, M., MODRÁČEK, O., PAŇÁK, P. (2002). Strojírenská technologie I. Metalografie a tepelné spracovaní. Praha, 2002. ISBN 80-7183-265-0.
    8. JANOVEC, J., DOMÁNKOVÁ, M., GRGAČ, P., GŐMŐRY, F., KUSÝ, M. (2012). Progresívne materiály a technológie. Bratislava. Slovenská technická univerzita, 2012. ISBN 978-80-227-3648-0.
    9. KLOPANOVÁ, V., NOVÁK,V., KVASNOVÁ,P., NOVÁK, D. (2017). Theoretical Basis of Fractographic Methods and Their Application in Fracture Modelling for Cr-Ni Steels Manufacturing Technology, No. 6, Vol. 17, (2017) ISSN 1213-2489, p 869-876. Go to original source...
    10. HAZLINGER, M., MORAVČÍK, R. (2007). Degradačné procesy a predikcia životnosti. Slovenská technická univerzita v Bratislave. 2007 ISBN 978-80-8096-031-5.

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content