Manufacturing Technology 2018, 18(6):1001-1006 | DOI: 10.21062/ujep/214.2018/a/1213-2489/MT/18/6/1001

Influence of Material Change of a Single-stage Front Gearbox Drive Shaft on Selected Strength Analysis Parameters

Martin Podařil, Ján Majerník
Faculty of Technology, The Institute of Technology and Business in České Budějovice. Okruľní 517/10, 370 01 České Budějovice. Czech Republic

Contribution is focused on the analysis of power ratios on a drive shaft of a single-stage front gearbox and comparison of design solution of drive shaft using selected materials suitable for shaft production in terms of minimizing gearbox dimensions with respect to maintaining the transmitted power. The aim of the authors is to achieve the smallest possible dimensions of the gearbox shaft by changing the materials from which it is made.

Keywords: gearbox, drive shaft, material, power

Published: December 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Podařil M, Majerník J. Influence of Material Change of a Single-stage Front Gearbox Drive Shaft on Selected Strength Analysis Parameters. Manufacturing Technology. 2018;18(6):1001-1006. doi: 10.21062/ujep/214.2018/a/1213-2489/MT/18/6/1001.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. HAĄKO, J., PAVLENKO, S., (2007). Návrh reduktorov, remeňových a re»azových provodov. Fakulta výrobních technologií TU v Koąicích. ISBN 978-80-8073-956-0
    2. PAVLENKO, S., HAĄKO, J., MA©ČENIK, J., NOVÁKOVÁ, M. (2008). ČASTI STROJOV II.. 1st ed. 2008. 186 p. ISBN 978-80-553-0103-7.
    3. ©VEC, V., (1985). Části a mechanismy strojů: Ozubené převody. Praha: České vysoké učení technické. Fakulta strojní.
    4. KLIMENDA, F., SOUKUP, J., ZMINDAK, M. (2016). Deformation of Aluminium Thin Plate, Manufacturing Technology, Volume 16, (2016), ISSN 1213-2489, 124-129. Go to original source...
    5. LEINVEBER, J., VÁVRA, P., (2008). Strojnické tabulky. Čtvrté doplněné vydání. Úvaly: Albra. ISBN 978-80-7361-051-7
    6. HANDRIK, M., SÁGA, M., PECHÁČ, P., KOPAS, P. (2015). Analysis of Force Conditions of the Hot Forming Machine in Rolling-Out of Bearing Rings, Manufacturing Technology, Volume 15, (2015), ISSN 1213-2489, 821825. Go to original source...
    7. PALÁT, H., (2012). Ozubené převody, základní profil ozubení [online]. 2012 [cit. 2016-03-29]. Dostupné z: http://www.strojka.opava.cz/UserFiles/File/_sablony/SPS_III/VY_32_INOVACE_C-0805.pdf
    8. IAIN BOYLE, YIMING RONG, DAVID C. BROWN (2011). A review and analysis of current computer-aided fixture design approaches. In: Robotics and Computer-Integrated Manufacturing, Vol. 27, No. 1, pp.1-12. Go to original source...
    9. Ozubené převody. SPSS Olomouc [online]. [cit. 2016-08-11]. Dostupné z: http://www.spssol.cz/~vyuka/PREDMETY/SPS/ozubene_prevody.pdf
    10. MAJERNÍK, J., KMEC, J., GOMBÁR, M., PODAŘIL, M. (2017). The Use of Simulation Programmes for the Structural Analysis and Engineering Optimization of Gating System Structures for Use with High Pressure Die Casting Technology. Manufacturing Technology, 2017, vol. 17, no. 3, p. 343-347. ISSN 1213-2489. Go to original source...
    11. Konstruování strojů: Výroba ozubených kol.: Ústav konstruování [online]. [cit. 2016-08-11]. Dostupné z: http://old.uk.fme.vutbr.cz/kestazeni/6C2/prednasky/prednaska3_6c2.pdf
    12. SMETANKA, L., ©«ASTNIAK, P. (2017). Analysis of Contact Stresses of Theoretical and Worn Profile by Using Computer Simulation. Manufacturing Technology, 2017, vol. 17, no. 4, p. 580-585. ISSN 1213-2489. Go to original source...
    13. BLATNICKÝ, M., DI®O, J., ©TAUDEROVÁ, M. (2017). Strength Analysis of a Structure for Attachment of a Winch on SUV. Manufacturing Technology, 2017, vol. 17, no. 3, p. 291-295. ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content