Manufacturing Technology 2019, 19(2):204-208 | DOI: 10.21062/ujep/270.2019/a/1213-2489/MT/19/2/204

Change of Selected Parameters of Steel Surface after Plasma Nitriding

David Dobrocky1, Zdenek Pokorny1, Zbynek Studeny1, Petr Dostal2
1 Department of Mechanical Engineering, Faculty of Military Technology, University of Defence in Brno, Kounicova 65, Brno 612 00, Czech Republic
2 Department of Technology and Automobile Transport, Faculty of AgriSciences, Mendel University in Brno, Zemědělská 1665/1, 613 00 Brno, Czech Republic

This article deals with the evaluation of the change of selected 2D structure parameters of the grinded surfaces before and after application of plasma nitridation. Changes in parameters were analyzed on 30CrMoV9 steel samples which were ground to Ra ≈ 0.03 and then plasma nitrided in a standard nitriding atmosphere. An absolute method was used to evaluate the surfaces. Measurements were performed on a profilometer CLI 1000. The parameters comprehensively describing the surface structure were subjected by analyzes, namely the height, length, shape parameters and parameters of the material ratio. After plasma nitriding, almost all selected surface structure parameters have been increased. Higher values of the monitored parameters have an influence on the increase of friction and wear and negatively affect the running-up properties of nitrided components.

Keywords: Grinded surface, Structure, Roughness, Plasma nitridation, Microgeometry
Grants and funding:

Project for the Development of the Organization „DZRO K 201“ and by the Specific research project 2016 of the Department of Mechanical Engineering „SV16-216“. The research has been supported by the project TP 6/2017: Defectoscopic quality assessment of technical and organic materials; financed by IGA AF MENDELU.

Published: April 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Dobrocky D, Pokorny Z, Studeny Z, Dostal P. Change of Selected Parameters of Steel Surface after Plasma Nitriding. Manufacturing Technology. 2019;19(2):204-208. doi: 10.21062/ujep/270.2019/a/1213-2489/MT/19/2/204.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. GERSTENMEYER, M., ORT, B.-L., ZANGER, F., SCHULZE, V. (2017). Influence of the Cutting Edge Microgeometry on the Surface Integrity During Mechanical Surface Modification by Complementary Machining, In: Procedia CIRP, Vol. 58, 2017, p. 55-60. Go to original source...
    2. SEDLÁK, J., POLZER, A., CHLADIL, J., SLANÝ, M., JAROŠ, A. (2017). Shape Inspection of Gear Prototypes Using Reverse Engineering Method. In: Manufacturing Technology, 2017, Vol. 17, No. 6, p. 945-952. Go to original source...
    3. BAKSA, T., SCHORNIK, V., ADAMEK, P., HRONEK, O., ZETEK, M. (2018). Effect of Grinding Conditions and Strategy on the Quality of the Cutting Edge, In: Manufacturing Technology, Vol. 18, 2018, No. 1, p. 3-7. ISSN 1213-2489. Go to original source...
    4. BUMBÁLEK, B., BUMBÁLEK, L. (2010). Surface texture after grinding of ceramic materials and its influence on the friction, In: International Journal of Computational Materials Sciences and Surface Engineering, Vol. 3, 2010, No. 1, p. 172-183. ISSN 1753-3465. Go to original source...
    5. DUBOVSKA, R., JAMBOR, J., MAJERIK, J. (2014). Qualitative Aspects of Machined Surfaces of High Strength Steels, In: Procedia Engineering, Vol. 69, 2014, p. 646-654. Go to original source...
    6. SEDLÁK, J., TROPP, P., CHLADIL, J., OSIČKA, K., SLIWKOVÁ, P. (2015). High-Speed Cutting of Bearing Rings from Material 100Cr6. In: Manufacturing Technology, Vol. 15, No. 5, p. 899-908. Go to original source...
    7. MRKVICA, I., ŠPALEK, F., SZOTKOWSKI, T. (2018). Influence of Cutting Tool Wear when Milling Inconel 718 on Resulting Roughness. In: Manufacturing Technology, Vol. 18, 2018, No. 3, p. 457-461. ISSN 1213-2489. Go to original source...
    8. DAS, J., LINKE, B. (2016). Effect of Manual Grinding Operations on Surface Integrity, In: Procedia CIRP, Vol. 45, 2016, p. 95-98. Go to original source...
    9. HRONEK, O., ZETEK, M., BAKSA, T., ADAMEK, P. (2018). Surface Quality Analysis of Cutting Tool Microgeometry to Achieve Higher Durability. In: Manufacturing Technology, Vol. 18, 2018, No. 1, p. 39-46. ISSN 1213-2489. Go to original source...
    10. HECKER, L.R., LIANG, S.Y. (2003). Predictive modelling of surface roughness in grinding, In: International Journal of Machine Tools and Manufacture, Vol. 43, 2003, No. 8, p. 755-761. Go to original source...
    11. SADÍLEK, M., KOUSAL, L., NÁPRSTKOVÁ, N., SZOTKOWSKI, T., HAJNYŠ, J. (2018). The Analysis of Accuracy of Machined Surfaces and Surfaces Roughness after 3axis and 5axis Milling. In: Manufacturing Technology, Vol. 18, 2018, No. 6, p. 1015-1022. ISSN 1213-2489. Go to original source...
    12. POKORNÝ, Z., HRUBÝ, V., STUDENÝ, Z. (2016). Effect of nitrogen on surface morphology of layers, In: Metallic materials, Vol. 54, 2016, No. 2, p. 119-124. ISSN 1338-4252. Go to original source...
    13. KLANICA, O., DOBROCKÝ, D., ONDERKA, F. (2014). The changes of surface parameters of the duplex systems: nitrided layer - coating at CoCrMo alloy, In: ECS Transaction 15th Abaf Brno 2014 Advanced Batteries, Accumulators and Fuel Cells, 2014, p. 255-259. ISSN 1938-5862. Go to original source...
    14. SEDLAČEK, M., PODGORNIK, B., VIŽINTIN, J. (2012). Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surface, In: Tribology International, Vol. 48, 2012, p. 102-112. Go to original source...
    15. KLANICA, O., SVOBODA, E., SONDOR, J., BARTOŠÍK, P., HRUBÝ, V. (2013). Změna textury povrchu povlaků na nástrojích po leštění, In: Vrstvy a povlaky, 2013, p. 145-150. ISBN 978-80-970824-2-0.
    16. TYKAL, M. (1991). Význam nosné křivky profilu nerovností povrchu a její posuzování. In: Drsnost povrchu a její vlivy na funkci součástí, 1991, Brno, s. 90 - 96.
    17. DOAN, T.V., KUSMIČ, D., POSPÍCHAL, M., TRAN, Q.D., NGUYEN, V.T. (2017). Friction and wear Behaviour of 42CrMo4 Steel Treated by Tenifer, Hard Chrome and Plasma Nitriding Technologies, In: Manufacturing Technology, Vol. 17, 2017, No. 2, p. 168-174. ISSN 1213-2489. Go to original source...
    18. KUILENBURG, J. V., MASEN, M.A., GROENENDIJK, M.N.W., BANA, V., HEIDE, E. V. D. (2012). An experimental study on the relation between surface texture and tactile friction, In: Tribology International, Vol. 48, 2012, p. 15-21. Go to original source...
    19. KUSMIČ, D., DOAN, T.V. (2017). Tribological and corrosion properties of plasma nitrided and nitrocarburized 42CrMo4 steel, In: IOP Conference Series: Materials Science and Engineering (MSE), IOP Publishing Ltd., Bristol, England, 2017, p. 1-9. ISSN 1757-8981. Go to original source...
    20. KUSMIČ, D., DOAN, T.V., HRUBY, V. (2018). Corrosion and Wear Resistance of Plasma Nitrided and Duplex Treated 42CrMo4 Steel. In: Manufacturing Technology, Vol. 18, 2018, No. 2, p. 259-265. ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content