Manufacturing Technology 2019, 19(3):359-365 | DOI: 10.21062/ujep/296.2019/a/1213-2489/MT/19/3/359

Internal Propagation Behavior on the Turning Angles in Steel Pipes

Erkegali Amanbayev1, Bazartai Alimbayev2, Bauyrzhan Manapbayev3, Raushan Djanuzakova4
1 Department of Architecture and Construction Production M.KH. Dulati Taraz State University 080012, 7 Suleymenov Str., Taraz, Republic of Kazakhstan
2 Department of Construction and Production of Materials M.KH. Dulati Taraz State University 080012, 7 Suleymenov Str., Taraz, Republic of Kazakhstan
3 Department of Construction and Production of Materials M.KH. Dulati Taraz State University 080012, 7 Suleymenov Str., Taraz, Republic of Kazakhstan
4 Department of Automation and Telecommunication M.KH. Dulati Taraz State University 080012, 7 Suleymenov Str., Taraz, Republic of Kazakhstan

Corrosive damages can lead to accidents on pipelines in various industries. Therefore, the main objective of the work is to study the peculiarities of the development of internal corrosion at the corners of turns in steel pipes. The paper discusses the development of corrosion. It substantiates the primary importance of the development of corrosion on curved sections of steel pipes. It has been established that, in curvilinear areas, the rate of corrosion development depends on the rate of fluid flow, on the number of ions, and also on the effect of centrifugal force. The authors studied the average rate of corrosion development at the turns of hydraulic structures. Thus, the results obtained showed that the location of steel pipes of hydraulic structures affect the rate of corrosion development from inside the pipes.

Keywords: Corrosion, Steel pipes, Lorentz force, Wall thickness, Straight sections

Published: June 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Amanbayev E, Alimbayev B, Manapbayev B, Djanuzakova R. Internal Propagation Behavior on the Turning Angles in Steel Pipes. Manufacturing Technology. 2019;19(3):359-365. doi: 10.21062/ujep/296.2019/a/1213-2489/MT/19/3/359.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. ALIMBAYEV, B. A., MANABAYEV, B. J. (2012). The Development of corrosion in the elements of metal structures in the aquatic environment, p. 136, Taraz Universiteti, Taraz.
    2. ALIMBAYEV, B.A., MANAPBAEV, B.Z., ALIMBAYEVA, Z.B., DJANUZAKOVA, R.J. (2014). About one mechanism of development of corrosion in steel designs. In: Materials of the International Scientific Practical Conference, pp.111-118. Birmingham, United Kingdom. Go to original source...
    3. ALIMBAYEV, B.A., MANAPBAYEV, B.ZH., AMANBAYEV, E. (2016). The Mechanism of corrosion in steel structures in the aquatic environment. In: Materials of international scientific-practical conference "Reclamation and water management: problems and solutions" pp. 42-45.
    4. ALIMBAYEV, B.A., MANAPBAYEV, B.Zh., AMANBAYEV, E.N. (2017). Colloidal processes in the development of corrosion of steel in metal structures of hydraulic structure. In: Materials of the International Scientific Practical Conference, pp.173-176. Philadelphia, USA. Go to original source...
    5. ALIMBAYEV, B.A., MANAPBAYEV, B.ZH., DZHANUZAKOVA, R.ZH. (2013). Features corrosion in curved sections of steel pipes of hydraulic structures. In: University News, No. 2, pp. 18-19.
    6. AMANBAYEV, E., ALIMBAYEV, B.A., MANAPBAYEV, B.ZH. (2016). Features of the development of corrosion on angles of bends in tubular steel structures. In: Bulletin of Architecture and Civil Engineering University, No 4, pp. 71-75.
    7. AMANBAYEV, E., ALIMBAYEV, B.A., MANAPBAYEV, B.ZH. (2018). The Influence of the location in the plane of the steel pipe of hydraulic engineering constructions on the speed of corrosion development. In: Bulletin of Architecture and Civil Engineering University, No 1, pp. 99-104.
    8. AUGUSTIN, Ya., SHLEDZEVSKY, E. (1978). Accidents Steel Structures, Stroyizdat, Moscow.
    9. AVAKYAN, L.G. (1955). From the experience of high-pressure pipelines operatio. In: Hydraulic Engineering, No 6, pp. 17-20.
    10. BALABAN-IRMENIN, YU.V., LIPOVSKIH, V.M., RUBASHOV, A.M. (1999). Protection against internal corrosion of pipelines of the water heating systems, Energoatomizdat, Moscow.
    11. BROŽE, M. (2018). Briquettes Properties after Four Years Storag. In: Journal Manufacturing Technology, Vol. 18, No. 1, pp. 11-15. Go to original source...
    12. ČARNOGURSKÁ, M., LÁZÁR, M., PŘÍHODA, M., SKOČILASOVÁ, B., KURILLA, P., MAREK, J. (2018) High-Temperature Processing and Recovery of Cu Catalyst Promoter. In: Manufacturing Technology, Vol. 18, No. 1, pp. 22-28. Go to original source...
    13. DONG, H.B., CHUL, H.K. (2004). Corrosion Fatigue Characteristics in the Weld of Multi-Pass Welded A106 Gr B Steel Pipe. In: KSME International Journal, Vol. 18, No. 1, pp. 114-121. Go to original source...
    14. EFIRD, K.D., WRIGHT, E.J., BOROS, J.A., HAILEY, T.G. (1993). Experimental correlation of steel corrosion in pipe flow with jet impingement and rotating cylinder laboratory tests. In: Corrosion 50, pp. 81/1-81/21.
    15. EVANS, U.R. (1972). An Introduction to Metallic Corrosion, Arnold, London.
    16. FAN, L., TANG, F., REIS, S.T., CHEN, G., KOENIGSTEIN, M.L. (2017). Corrosion Resistances of Steel Pipes Internally Coated with Enamel. In: Corrosion 73, pp. 1335-1345 Go to original source...
    17. FONTANA, M.G. (1986). Corrosion Engineering, McGraw-Hill BookCompany, New York.
    18. FRANKEL, G. Ya. (1970). Protection of the inner surface of pressure pipelines of hydroelectric power plants against corrosion and mineral deposits. In: Energy Construction, No 5, pp. 54-57.
    19. FREJSHIST, A.R. (1987). From the experience of the construction and operation steel pressure pipelines of hydraulic systems. In: Hydraulic Engineering, No 3, pp. 12-19.6
    20. FREJSHIST, A.R., MARTENSON, I.V., ROZINA, I.D. (1987). Increase of reliability of mechanical equipment and steelwork of hydraulic structures, p. 232, Energoatomizdat, Moscow
    21. HENTHORNE, M. (2016). The Slow Strain Rate Stress Corrosion Cracking Test-A 50 Year Retrospective. In: Corrosion 72, pp. 1488-1518. Go to original source...
    22. JEPSON, W.P. (1994). The effect of flow characteristics on sweet corrosion in high-pressure, three-phase, oil/water/gas horizontal pipelines. In: Prevention of Pipeline Corrosion Conference. Houston, Texas.
    23. JEPSON, W.P. (1997). Model for Sweet Corrosion in Horizontal Multiphase Slug Flow. In: Corrosion/97, No. 11, TX: NACE, Houston.
    24. KOSTYUCHENKO, A.A., BORDOVSKII, A.M., KOZIK, A.N., VOROB'EV, V.V., SOSNOVSKII, L.A. (2009). Experimental studies on the failure of oil pipes with inner surface corrosion defects. In: Strength of Materials, Vol. 41, No. 5, pp. 527-533. Go to original source...
    25. KOVÁČIKOVÁ, P., VAVRO, J., VAVRO, J.jr., DUBEC, A. (2018). Measuring of Vibration-Damping Properties of Cast Iron. In: Manufacturing Technology, Vol. 18, No. 1, pp. 57-59. Go to original source...
    26. KUDISHIN, Y.I., BELINA, E.I. (2007). Metal construction, Academy, Moscow.37
    27. MANIVEL, P. (2017). The Influence of H+ and Cl- Ions on the Corrosion Inhibitive Effect of Poly(para-aminophenol) for Iron in Hydrochloric acid. In: Corrosion Science and Technology, Vol. 16, No. 4, pp. 187-193.
    28. MARCUS, P. (2012). Corrosion mechanisms in theory and practice, CRC Press, U.S. Go to original source...
    29. MARTENSON, I.V. (1982). Questions of reliability of the mechanical equipment of hydraulic engineering constructions. In: Hydrotechnical Construction, No 2, pp. 10-11. Go to original source...
    30. MARTENSON, I.V. (1985). The results of the survey and experience in the operation of mechanical equipment of hydraulic structures. In: Hydraulic Engineering, No 10, pp. 34-37. Go to original source...
    31. ORLOVA, S.S., PANKOVA, T.A., KOCHETKOV, A.V. (2016). Differential study of the kinetics of corrosion processes in pipelines transporting wastewater. In: Hydraulic Engineering, No. 4, pp. 12-19.
    32. PAKHOMOV, V.S., SHEVCHENKO, A.A. (2009). Chemical resistance of materials and corrosion protection, p. 448, Chemistry, Colossus, Moscow.
    33. PAPAVINASAM, S., DOIRON A., REVIE R.W. (2010). Model to Predict Internal Pitting Corrosion of Oil and Gas Pipelines. In: Corrosion 66, pp. 035006-035006-11. Go to original source...
    34. REFORMATSKAYA, I.I., ASHCHEULOVA, I.I., IVLEVA, G.A., TAUBALDIEV, T.S., MURINOV, S.K., TASTANOV, K.Kh., PRUTCHENKO, S.G., KOSTIN, D.V., ASTRAKHAN-MANGYSHLAK WATER CONDUIT. (2002). The Corrosion State on the Internal Surface and Methods for Its Corrosion Protection. Part I. Corrosion Deposits. In: Protection of Metals, Vol. 38, No. 6, pp. 590-594. Go to original source...
    35. REVIE, R.W. (Ed). (2011). Uhlig's corrosion handbook, Hoboken, New Jersey Go to original source...
    36. SAVELYEV, I.V. (2016). Course of physics. Mechanics. Molecular Physics, 352 p., LAN, Saint Petersburg.
    37. TAN, M.Yj, VARELA, F., HUO, Y., GUPTA, R., ABREU, D., MAHDAVI, F., HINTON, B., FORSYTH, M. (2016). An Overview of New Progresses in Understanding Pipeline Corrosion. In: Corrosion Science and Technology, Vol. 15, No. 6, pp. 271-280. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content