Manufacturing Technology 2019, 19(3):492-498 | DOI: 10.21062/ujep/318.2019/a/1213-2489/MT/19/3/492

The Effect of Welding Parameters on the Properties of Join between Studs and Steel Sheet USIBOR Type 22MnB5

Pavol Sejč, Judita Belanová
Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, Nám.Slobody17, 812 31 Bratislava. Slovak Republic

To build the car body parts of today's cars, materials of higher strength are used on an ever-wider scale. They are, for example, boron-containing steels, which are highly resistant to special thermo-mechanical processing, coated with AlSi; e.g. USIBOR 22MnB5 type materials. For the final assembly of all body mounting components, it is necessary to apply different types of joining stud elements. One of the possibilities of making joinings between sheets and fastening elements - studs is the technology of short-circuit stud welding.
This article aims to evaluate the influence of welding parameters of steel studs on high-strength steel sheet type USIBOR 22MnB5 with AlSi coating on selected mechanical properties of joints.

Keywords: Ultra-high strength steel (UHSS), stud welding, strength of welding joint
Grants and funding:

VEGA 1/0405/19 research project. Support of the UVP STU Bratislava ITMS 26240220084.

Published: June 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Sejč P, Belanová J. The Effect of Welding Parameters on the Properties of Join between Studs and Steel Sheet USIBOR Type 22MnB5. Manufacturing Technology. 2019;19(3):492-498. doi: 10.21062/ujep/318.2019/a/1213-2489/MT/19/3/492.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. MATTHEWS, A. E., DAVIES, G. M. (1997). Precoated steel development for the automotive industry. In: Proceedings of the institution of mechanical engineers, 211, Part D, pp.319-324. Go to original source...
    2. CARY, H. B., HELZER, S. C. (2005). Modern welding technology. Pearson Prentice Hall, New Jersey, ISBN 0-13-113029-3.
    3. Welding Handbook, Eighth Edition (1991). V. 2, Welding Processes, Chapter 9, Stud Welding. American Welding Society, Miami, Fl, pp. 300 - 327
    4. CHAMBERS, A.H. (2001). Principles and Practices of Stud Welding, PCI Journal Vol. 46, No 5, pp. 46-58. Go to original source...
    5. HSU, C., MUMAW, J. (2011). Weldability of Advanced High-Strength Steel Drawn Arc Stud Welding. Welding journal, march, VOL. 90, pp. 45 - 53
    6. HONGYAN, Z., SENKARA J. (2017). Resistance Welding: Fundamentals and Applications, 2nd Edition CRC Press, Published March 31,456 Pages.
    7. http://www.antec.com.au/media/downloads/stud_welding_catalogue.pdf. Available on web.(24.10.2018)
    8. YILMAZ, N. F., HAMZA, A., (2014). Effect of Process Parameters on Mechanical Properties of Arc Stud Weld. Materialprufung. October 2014, 56 (2014) 10, pp. 806 - 811 Go to original source...
    9. SHOME, M., TUMULURU, M., (2015). Welding and Joining of Advanced High Strength Steels (AHSS). 1st Edition, Woodhead Publishing,, Page Count: 204, ISBN: 9780857094360 Go to original source...
    10. DOBROCKY, D., DOSTAL, P., SUSTR, M., POKORNY, Z., STUDENY, Z., (2018). Anylysis of Weld Joint of DX51D Steel with AlMg3 Alloy Made by CMT Welding Method. In: Manufacturing Technology, Vol.18, No.2, pp. 215-221, Czech Republic. Go to original source...
    11. BUBLIKOVA, D., MASEK, I., VOREL, I., JENICEK, ©. (2017). Stability of Retained Austenite in High-Strength Martensitic Steels with Low Ms Teperature. In: Manufacturing Technology, Vol.17, No.4, pp. 428-433, Czech Republic. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content