Manufacturing Technology 2019, 19(4):712-717 | DOI: 10.21062/ujep/360.2019/a/1213-2489/MT/19/4/712

Turning with Linear Tangential Tool Shift and Its Results

Karol Vasilko
Faculty of Manufacturing Technology Technical university of Košice, Bayerova 1, SR

Machining, mainly turning, si characterised by the highest labour input among the technological methods. This leads to the conditin when, for instance, in line production at hammering power press, which produces forginngs in the stroke of 1 second, tens of lathes follow and their gradual turning with the stroke of tens of seconds up to minutes. Whole history of material machining has been lead with the effort to shorten machining time by the improvement of cutting materials, tool geometry, integration of machining of several workpiece areas in one stroke, etc. The article analyzes an effectiv way to signaficantly sorten machine time, based on the application of turning with tangential tool feed versus workpiece. Inaddition, the method integrates roughing and finishing into one operation and ensures high quality of machined workpiece surface.

Keywords: turning, machining time, tangetial shift, quality of machined surface

Published: August 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K. Turning with Linear Tangential Tool Shift and Its Results. Manufacturing Technology. 2019;19(4):712-717. doi: 10.21062/ujep/360.2019/a/1213-2489/MT/19/4/712.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. ETIN, A.O. (1964). Kinematičeskij analiz metodov obrabotki rezanijem. Moskva, Mašinostrojenije, 1964.
    2. FILE, L. (1970). Metal removal by skiving on turning machines. Machinery and production engineering, 2911, 1970.
    3. KANEVCOV, V. M., BOSINZA, A. J. (1961). Tangenciaľnoje točenije vnutrennych poverchnostej. In: Trudy instituta VNIIPP, 26, Moskva, 1961 No. 2
    4. LADANY, Sh. (1972). Die wirtscaftlichan Aspekte des Drehens mit spiralförmigem Drehwerkzeug. Microtechnic č. 8, 1972.
    5. ŠAUMJAN, G. A., JERAMAKOV, J. M. (1970). Opredelenije tolštiny sreza pri točenii Otverstvij s krugovoj podačej. Izvesija VUZ-Mašinostrojenije, Nr. 5, 1970.
    6. LOLADZE, T. N. (1989). Základy optimalizácie strojárskej technológie. Bratislava, ALFA, 1989, 216 s., ISBN 80-05-00083-9
    7. JERZAK, J et al. (2010). Surface integrity of hardened bearing steel after milling. Manufacturing Technology, Vol 10, 2010, pp. 80-87. Go to original source...
    8. VASILKO, K., STROJNÝ, M. Progresívne metódy sústruženia. Bratislava, ALFA, 1077, 208 s.
    9. MAŇKOVA, I. (2000). Progresívne technológie. Košice, Vienala, 2000, 275 s., ISBN 80-7099-430-4
    10. KUNDRÁK, J., PÁLMAI, Z. (2019). The Change of Tool Life in a Wide Range of Cutting Speeds in Hard Turning. Manufacturing Technology, April 2019, Vol. 19, No.2 Go to original source...
    11. JERSAK, J. et al. (2012). The Integrity of th Surface after Millingof uenched Bearing Steel. Manufacturing Technology, No. 4, 2012, pp.13-20

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content