Manufacturing Technology 2019, 19(5):880-885 | DOI: 10.21062/ujep/388.2019/a/1213-2489/MT/19/5/880

Integrated Tool for High-Feed Turning

Karol Vasilko
Faculty of Manufacturing Technology, Technical University of Košice, 080 01 Prešov, Bayerova 1, SR

Machining, mainly turning, si characterised by the highest labour input among the technological methods. This leads to the conditin when, for instance, in line production at hammering power press, which produces forginngs in the stroke of 1 second, tens of lathes follow and their gradual turning with the stroke of tens of seconds up to minutes. Whole history of material machining has been lead with the effort to shorten machining time by the improvement of cutting materials, tool geometry, integration of machining The article based on the method integrates roughing and finishing into one operation and ensures high quality of machined workpiece surface.

Keywords: Turning, Tool geometry, Cutting speed, Surface roughness

Published: October 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K. Integrated Tool for High-Feed Turning. Manufacturing Technology. 2019;19(5):880-885. doi: 10.21062/ujep/388.2019/a/1213-2489/MT/19/5/880.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. DE CHIFFRE, I.: Metal cutting. Mechanics and aopplications. Lydgby, Technical University of Denmark, 1990.
    2. GRZESIK, W.: Podstavy skrawania materialow konstrukcyjnych.Warszawa, 2010, 52 s., ISBN 978-83-204-3668-6
    3. HOLEŠOVSKÝ,F., HRALA, M., NOVÁK, M.: Ground Surface - Quality and its Loading Capacity. Manufacturing Technology, Vol. 3, 2013, pp. 26-32, ISBN 1213-2489.
    4. JERSAK, J et al: The integrity of th Surface after Milling of uenched Bearing Stell Manufacturing Technology, 2017, No. 4, pp.13-20, ISSN 1213-2489.
    5. KALPAKJIAN, S.: Manufacturing Engineering and Technology. New York: EddisonWesley Publishing Company, 1989, 1199 p.
    6. KOTĚŠOVEC, V.: Ortogonální frézováni dřeva, 25/1981, VVUD Praha
    7. KOVAČ, P., MIKILIČ,D.: Rezanje metala. Univerzitet v Novom Sadu, 1998, 300 s. ISBN 86-899-40015-1
    8. LISIČAN, J.: Teória a technikaspracovania dreva. Zvolen, MATCENTRUM, 1996 626 s.
    9. NEMEC, E.: K filozófii nášho odvetvia. Drevo 48, 1993, č.6, s.
    10. NOVÁK, M.: Surface with high precision of roughness after grinding. Manufacturing Technology, Vol 12, No. 12, pp.66-70, ISSN 1213-2489.
    11. POŽGAJ, A. t al.: Štruktúra a vlastnosti dreva. Príroda a spoločnosť, 1997, 486 s.
    12. TURKOVICH, B., F.: A contribution to the theory of metal cutting. Proc. Int. Conf.Prod. Eng. Tokio, 1974, Part 1, s. 505-508.
    13. ÚRAD PRIEMYSELNÉHO VLASTNÍCTVA SR. Nástroj na sústruženie. Patent SR, č.: 280127., pôvodca: Karol Vasilko

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content