Manufacturing Technology 2019, 19(6):1080-1087 | DOI: 10.21062/ujep/421.2019/a/1213-2489/MT/19/6/1080

Research on Engine Speed Control System Based on Fuzzy Adaptive PID Controller

Hairui Wang1, Lu Wang1, Yongyi Liao2,*, Hongwei Yang3
1 Faculty of Information Engineering and Automation, Kunming University of Science and Technology, China
2 Continuing Education College, Kunming University of Science and Technology, Kunming 650051, China
3 Education Department of Yunnan Province, China

Traditional PID fails to meet the requirements in control precision and response speed while implementing a nonlinear control. Such problem can be easily solved by adaptive fuzzy PID, which indicates that the adaptive fuzzy PID will realize the precise control in engine speed control system, a typical nonlinear system. This paper first discusses the mathematical control model of diesel engine speed-control system and the characteristics of the traditional PID control. Then, the speed control principle of the adaptive fuzzy PID controller is analyzed. Besides, the membership function of fuzzy logical, the fuzzy logical variable and the fuzzy reasoning rules are determined. Next, the adaptive correction method is briefly introduced. Finally, the model of traditional PID and adaptive fuzzy PID controller are simulated and the same disturb is added into the control systems. The simulation results show that the adaptive fuzzy PID controller has better performance in dynamic response and robustness than that of traditional PID.

Keywords: Diesel Engine, Adaptive fuzzy PID controller, Speed-control system
Grants and funding:

National Natural Science Foundation of China grants program (No.61263023 and NO.61863016).

Published: December 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Wang H, Wang L, Liao Y, Yang H. Research on Engine Speed Control System Based on Fuzzy Adaptive PID Controller. Manufacturing Technology. 2019;19(6):1080-1087. doi: 10.21062/ujep/421.2019/a/1213-2489/MT/19/6/1080.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. JIN, T., QU, L., LIU, S., GAO, J., WANG, J., & WANG, F., ET AL. (2014). Chemical characteristics of particulate matter emitted from a heavy duty diesel engine and correlation among inorganic and pah components. In: Fuel, Vol. 116, No. 1, pp. 655-661. Go to original source...
    2. LIAO Y. Y., LIAO B. Y. (2019). Dynamics Modeling and Modal Analysis of Machine Tool Considering Joints Parameters. In: Manufacturing Technology, Vol. 19, No. 2, pp. 267-272. Go to original source...
    3. JIAN, F., MARÉ, JEAN-CHARLES, & YONGLING, F. (2016). Modelling and simulation of flight control electromechanical actuators with special focus on model architecting, multidisciplinary effects and power flows. In: Chinese Journal of Aeronautics, Vol. 30, No.1, pp. 47-65. S1000936116301996. Go to original source...
    4. ZHENG, H., ZENG, Q., CHEN, W., ZHU, H., & CHEN, C. (2017). Improved PID control algorithm for quadrotor based on MCS. In: Guidance, Navigation & Control Conference. IEEE.
    5. PETRU M., MLYNEK J., MARTINEC T. (2018). Numerical Modelling for Optimization of Fibres Winding Process of Manufacturing Technology for the Non-Circular Aerospaces Frames. In: Manufacturing Technology, Vol. 18, pp. 90-98. Go to original source...
    6. SEGLA S., KAMPO J. (2018). The Role of Modelling of Road Unevennesses in Vehicle Dynamics. In: Manufacturing Technology, Vol. 18, pp. 124-129. Go to original source...
    7. SAPIETA M., SULKA P., SVOBODA M. (2018). Using a Numerical Model to Verification of Thermoelastic Analysis of Flat Specimen. In: Manufacturing Technology, Vol. 18, pp. 482-486. Go to original source...
    8. ZHU, D. H., HONG, Y. Z., & ZHU, H. Q. (2009). Mathematical model and control of magnetic bearings based on α-th order inverse system theory. In: Electric Machines & Control, Vol. 529, No. 04, pp. 539-543. Go to original source...
    9. FENG, X., JIAN-HUA, W., & CHENG-JIAN, G. (2011). Research of fuzzy-pid controller for diesel engine idle speed control. In: Tractor & Farm Transporter, Vol. 38, No. 3, pp. 43-45.
    10. SUN B.-L., FAN J.-Z., SHI. (2010). Research on Fuzzy-PID Combined Speed Governing and Rapid Control Prototyping of Marine Diesel Engine. In: Chinese Internal Combustion Engine Engineering, Vol. 31, No. 4, pp. 54-58.
    11. VARGAS-MARTÍNEZ, ADRIANA, MINCHALA-AVILA, L. I., ZHANG, Y., GARZA-CASTAÑÓN, LUIS EDUARDO, & ACOSTA-SANTANA, P. (2015). Fault-tolerant controller design for a master generation unit in an isolated hybrid wind-diesel power system. In: International Journal of Robust and Nonlinear Control, Vol. 25, No. 5, pp. 761-772. Go to original source...
    12. MAHTO, T., & MUKHERJEE, V. (2017). Fractional order fuzzy pid controller for wind energy-based hybrid power system using quasi-oppositional harmony search algorithm. In: IET Generation, Transmission & Distribution, Vol. 11, No. 13, pp. 3299-3309. Go to original source...
    13. MA, J., & JI, R. (2016). Fuzzy PID for Quadrotor Space Fixed-Point Position Control. In: Sixth International Conference on Instrumentation & Measurement. IEEE. Go to original source...
    14. YUSOF, A. M. (2013). Comparative study of conventional pid and fuzzy-pid for dc motor speed control. In: UTHM Institutional Repository.
    15. PAPADOPOULOS, K. G., TSELEPIS, N. D., & MARGARIS, N. I. (2013). Type-iii closed loop control systems-digital pid controller design. In: Journal of Process Control, Vol. 23, No. 10, pp. 1401-1414. Go to original source...
    16. CHEN, X. H., RAHMAN, M. L., & ZHANG, Y. (2016). Adaptive Fuzzy PID speed control of DC belt conveyor system. In: 2016 17th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (SNPD). IEEE.
    17. YAQI, R., ZHAOSHENG, T., QIANG, H., YAKUN, L., & HAIJUN, L. (2015). Research on the fuzzy-pid adjustment method of electronic analytical balance. Chinese Journal of Scientific Instrument, Vol. 36, No. 6, pp. 1424-1432.
    18. ROJAS, I., POMARES, H., GONZALEZ, J., HERRERA, L. J., GUILLEN, A., & ROJAS, F., ET AL. (2006). Adaptive fuzzy controller: application to the control of the temperature of a dynamic room in real time. In: Fuzzy Sets and Systems, Vol. 157, No. 16, pp. 2241-2258. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content