Manufacturing Technology 2020, 20(2):210-216 | DOI: 10.21062/mft.2020.026

Development of a Specialized Lathe Chuck for Turning Operations of Cast Iron Rope Wheels

Izabela Miturska1, Anna Rudawska1, Nadežda Čuboňová2, Nataša Náprstková3
1 Lublin University of Technology, Faculty of Mechanical Engineering, Nadbystrzycka 36, 20-618 Lublin, Poland
2 University of Žilina, Faculty of Mechanical Engineering, Department of Automation and Production Systems, Univerzitna 8215/1, 010 26 Žilina, Slovakia
3 Jan Evangelista Purkyně University in Ústí nad Labem, Faculty of Mechanical Engineering, Pasteurova 7, 400 96 Ústí nad Labem, Czech Republic

The use of lathe chucks in machine building companies is the result of a great deal of work and the develop-ment of technical thought. Due to the progress and the possibility of increasing efficiency and at the same time relieving people from work that requires a lot of effort, especially physical effort, the use of better and more efficient production methods is a target that should be pursued nowadays. In the manufacturing pro-cess, these objectives can be achieved with the use of dedicated equipment. The following work will present an example of a lathe chuck specialized in turning operations. The aim of the work was to use a universal chuck as a base for designing and manufacturing a specialized chuck so that it is possible to mount rope wheels with diameters from 240 to 580 mm. This would eliminate the necessity of time-consuming changeo-vers. In addition, it is assumed that the handle must meet the conditions imposed by the limited number of tools and the working dimensions of the machine. The machining process itself was also important, where the most advantageous solution was to perform most of the operations in one clamping.

Keywords: Specialized lathe chuck, Turning operations, Rope wheels

Prepublished online: August 17, 2020; Published: August 18, 2020  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Miturska I, Rudawska A, Čuboňová N, Náprstková N. Development of a Specialized Lathe Chuck for Turning Operations of Cast Iron Rope Wheels. Manufacturing Technology. 2020;20(2):210-216. doi: 10.21062/mft.2020.026.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BARRY, A. (2006). Technological Zones. In: European Journal of Social Theory. Vol. 9, No. 2, pp. 239-253. Go to original source...
    2. BARYLSKI, A. (2017). Quantitative Evaluation of Producibility of Fixture. In: Systemy wspomagania w inżynierii produkcji - Technology Assessment w ujęciu teoretycznym i praktycznym. Vol. 6, No. 5, pp. 21-32.
    3. ENDLER, I., LEONHARDT, A., SCHEIBE, H.-J., BORN, R. (1996). Interlayers for diamond deposition on tool materials. In: Diamond and Related Materials. Vol. 5, No. 3-5, pp. 299-303. Go to original source...
    4. FELD, M. (2002). Machining handles. Scientific and Technical Publishers.
    5. FELD, M. (2000). Mechanical construction technology. Scientific Publishers PWN.
    6. FILLA, R. (2005). Operator and machine models for dynamic simulation of construction machinery. Linköpings universitet.
    7. GRINT, K., WOOLGAR, S. (2013). The Machine at Work: Technology, Work and Organization. Wiley.
    8. HAUSMAN, J.A., LEONARD, G.K. (2003). The Competitive Effects of a New Product Introduction: A Case Study. In: The Journal of Industrial Economics. Vol. 3, No. 50, pp. 237-263. Go to original source...
    9. KALSI, N.S., SEHGAL, R., SHARMA, V.S. (2010). Cryogenic Treatment of Tool Materials: A Review. In: Materials and Manufacturing Processes. Vol. 10, No. 25, pp. 1077-1100. Go to original source...
    10. [KRAMER, B.M. (1987). On Tool Materials for High Speed Machining. In: Journal of Engineering for Industry. Vol. 2, No. 109, pp. 87. Go to original source...
    11. [KRISHNAKUMAR, K., MELKOTE, S.N. (2000). Machining fixture layout optimization using the genetic algorithm. In: International Journal of Machine Tools and Manufacture. Vol. 4, No. 40, pp. 579-598. Go to original source...
    12. KURATA, Y., MERDOL, S.D., ALTINTAS, Y., SUZUKI, N., SHAMOTO, E. (2010). Chatter Stability in Turning and Milling with in Process Identified Process Damping. In. Journal of Advanced Mechanical Design, Systems, and Manufacturing. Vol. 4, No. 6, pp. 1107-1118. Go to original source...
    13. LI, W., KARA, S. (2011). An empirical model for predicting energy consumption of manufacturing pro-cesses: a case of turning process. In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol.9, No. 225, pp. 1636-1646. Go to original source...
    14. LITVAJ, I., STANCEKOVA, D. (2015). Decision - Making, and Their Relation to The Knowledge Man-agement, Use of Knowledge Management in Decision - Making. In: Procedia Economics and Finance. Vol. 23, pp. 467-472. Go to original source...
    15. LONKWIC, P. (2007). Selected aspects of the operation of cable gearboxes in passenger lifts. In: Dozór Techniczny. Vol. 1, pp. 15-19.
    16. MARTINOV, G.M., OBUHOV, A.I., MARTINOVA, L.I., GRIGORIEV, A.S. (2014). An Approach to Build-ing Specialized CNC Systems for Non-traditional Processes. In: Procedia CIRP. Vol. 14, pp. 511-516. Go to original source...
    17. NÁPRSTKOVÁ, N., ŠRAMHAUSER, K., CAIS, J., STANČEKOVÁ D. (2018). Using of the Electron Microscope to Evaluate the Tool Wear for a Selected Cutting Insert. In: Manufacturing Technology. Vol. 18 (4), pp. 635-640. Go to original source...
    18. PETER, H. (2018). Precision machining technology. Cengage Learning.
    19. RUDAWSKA, A. (2016). Production process logistics. Wydawnictwa Komunikacji i Łączności.
    20. SCHEY, J.A. (2000). Introduction to manufacturing processes. McGraw-Hill.
    21. SCHMITZ, T.L., DONALSON, R.R. (2000). Predicting High-Speed Machining Dynamics by Substructure Analysis. CIRP Annals. Vol. 1, No. 49, pp. 303-308. Go to original source...
    22. STANCEKOVA, D., MARTIKAN, P., SVOBODOVA, J., JANOTA, M., KRATOCHVIL, J. (2018). Influence of Cutting Parameters on Cylindricity Deviation by Centerless Grinding. In: Manufacturing Technology. Vol. 18 (4). pp 674-678. Go to original source...
    23. VIVARELLI, M., PIANTA, M. (2000). The Employment Impact of Innovation: Evidence and policy. Tay-lor & Francis.
    24. ZAHAVI, E., TORBILO, V. (2019). Fatigue Design: Life Expectancy of Machine Parts. CRC Press. Go to original source...
    25. https://www.sandvik.coromant.com [access date: 22.11.2019]
    26. Operating Instructions for Megatum Smart Machine Tools. Japonia, Yamazaki Mazak Corporation [ac-cess date: 22.11.2019]

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content