Manufacturing Technology 2020, 20(2):223-228 | DOI: 10.21062/mft.2020.031

Research on wear resistance of polymeric composite materials based on microparticles from tyre recyclation process

Miroslav Müller1, Anna Rudawska2, Martin Tichý1, Viktor Kolář1, Monika Hromasová3
1 Czech University of Life Sciences Prague, Department of Material Science and Manufacturing Technology, Kamýcká 129, 165 00 Praha 6 – Suchdol, Czech Republic
2 Politechnika Lubelska, Faculty of Mechanical Engineering, Lublin, Poland
3 Czech University of Life Sciences Prague, Department of Electrical Engineering and Automation, Kamýcká 129, 165 00 Praha 6 – Suchdol, Czech Republic

A huge amount of waste comes into being from tyres which cannot already be used for their purpose. There are many ways how to utilize this waste but material recyclation is a priority. Waste tyre rubbers can be processed into a form of granulate which can be used into polymeric composite materials. This research deals with possibili-ties of tyre waste composite material utilization in areas distinguished for wear. The aim of the research was an assessment of a usage possibility of rubber powder (RP) coming into being from tyre recyclation process as a filler into a thermosetting matrix from firm Havel Composite applied into composite boards made by a vacuum infu-sion. The research focused on an evaluation of wear by friction against loosely fixed abrasive particles according to GOST 23.208-79, hardness and interaction of the matrix and the reinforcement by means of SEM analysis of the polymeric composite materials reinforced with waste microparticles arisen from tyre recyclation process. Research results proved a positive influence of the filler on the improvement of the wear resistance depending on the size of active rubber powder.

Keywords: Hardness, Mass Loss, Wear Track, Loosely Fixed Abrasive Particles, SEM
Grants and funding:

Internal grant agency of Faculty of Engineering, Czech University of Life Sciences Prague (no. 31140/1312/313108).

Prepublished online: August 17, 2020; Published: August 18, 2020  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Müller M, Rudawska A, Tichý M, Kolář V, Hromasová M. Research on wear resistance of polymeric composite materials based on microparticles from tyre recyclation process. Manufacturing Technology. 2020;20(2):223-228. doi: 10.21062/mft.2020.031.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. MÜLLER, M., VALÁŠEK, P., RUDAWSKA, A., & CHOTĚBORSKÝ, R. (2018). Effect of active rubber powder on structural two-component epoxy resin and its mechanical properties. Journal of adhesion science and Technology, Vol. 32, No. 14, pp. 1531-1547. Go to original source...
    2. BRUNEROVÁ, A., MÜLLER, M., ŠLEGER, V., AMBARITA, H., & VALÁŠEK, P. (2018). Bio-Pellet Fuel from Oil Palm Empty Fruit Bunches (EFB): Using European Standards for Quality Testing. Sustainability, Vol. 10, No. 12, pp. 4443. Go to original source...
    3. RUGGIERO, A., VALÁŠEK, P., & MÜLLER, M. (2016). Exploitation of waste date seeds of Phoenix dactylifera in form of polymeric particle biocomposite: Investigation on adhesion, cohesion and wear. Composites Part B: Engineering, Vol. 104, pp. 9-16. Go to original source...
    4. KRMELA, J., & KRMELOVA, V. (2011). Tire Casings and Their Material Characteristics for Computational Modeling of Tires. In 16th International Scientific Conference Engineering for Rural Development, pp. 206-211.
    5. KRMELA, J., & TOMANOVA, V. (2010). Microstructure of tire composite after corrosion. International Journal of Applied Mechanics and Engineering, Vol. 15, No. 2, pp. 433-439.
    6. GHOFRANI, M., ASHORI, A., REZVANI, M. H., & GHAMSARI, F. A. (2016). Acoustical properties of plywood/waste tire rubber composite panels. Measurement, Vol. 94, pp. 382-387. Go to original source...
    7. SIENKIEWICZ, M., JANIK, H., BORZĘDOWSKA-LABUDA, K., & KUCIŃSKA-LIPKA, J. (2017). Environmentally friendly polymer-rubber composites obtained from waste tyres: A review. Journal of cleaner production, Vol. 147, pp. 560-571. Go to original source...
    8. AOUDIA, K., AZEM, S., HOCINE, N. A., GRATTON, M., PETTARIN, V., & SEGHAR, S. (2017). Recycling of waste tire rubber: Microwave devulcanization and incorporation in a thermoset resin. Waste management, Vol. 60, pp. 471-481. Go to original source...
    9. MÜLLER, M., VALÁŠEK, P., & RUDAWSKA, A. (2017). Mechanical properties of adhesive bonds reinforced with biological fabric. Journal of adhesion science and Technology, Vol. 31, No. 17, pp. 1859-1871. Go to original source...
    10. AZIZ, S. H., & ANSELL, M. P. (2004). The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1-polyester resin matrix. Composites science and technology, Vol. 64, No. 9, pp. 1219-1230. Go to original source...
    11. ALVES, C., SILVA, A. J., REIS, L. G., FREITAS, M., RODRIGUES, L. B., & ALVES, D. E. (2010). Ecodesign of automotive components making use of natural jute fiber composites. Journal of cleaner production, Vol. 18, No. 4, pp. 313-327. Go to original source...
    12. BLEDZKI, A. K., FARUK, O., & SAIN, M. (2012). Biocomposites Reinforced with Natural Fibers. Progress in Polymer Science, Vol. 37, pp. 1552-1596. Go to original source...
    13. EL-TAYEB, N. S. M., YOUSIF, B. F., & YAP, T. C. (2006). Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear, Vol. 261, No. 3-4, pp. 443-452. Go to original source...
    14. PIHTILI, H., & TOSUN, N. (2002). Effect of load and speed on the wear behaviour of woven glass fabrics and aramid fibre-reinforced composites. Wear, Vol. 252, No. 11-12, pp. 979-984. Go to original source...
    15. KUMAR, B. R., SURESHA, B., & VENKATARAMAREDDY, M. (2009). Effect of particulate fillers on mechanical and abrasive wear behaviour of polyamide 66/polypropylene nanocomposites. Materials & Design, Vol. 30, No. 9, pp. 3852-3858. Go to original source...
    16. MÜLLER, M., RUGGIERO, A., VALÁŠEK, P. (2017). Mechanical Characterisation of Metal/Polymeric Composite Waste/Metal Sandwich Panel. Manufacturing Technology, Vol. 17, No. 4, pp. 530-536. Go to original source...
    17. SVOBODOVÁ, J., LYSOŇKOVÁ, I., KREJČÍ, M. (2019). Microhardness and Nano-hardness Measurement of Composite Coatings Applied to Aluminium Substrate. Manufacturing Technology, Vol. 19, No. 4, pp. 700-705. Go to original source...
    18. NOVOTNÝ, J., LYSOŇKOVÁ, I., MICHNA, Š., NÁPRSTKOVÁ, N. (2017). Research of Application Possibilities of Selected Mechanically Alloyed Metal Powders. Manufacturing Technology, Vol. 17, No. 5, pp. 811-815. Go to original source...
    19. RUDAWSKA, A. (2012). Surface free energy and 7075 aluminium bonded joint strength following degreasing only and without any prior treatment. Journal of Adhesion Science and Technology, Vol. 26, No. 8-9, pp. 1233-1247. Go to original source...
    20. VALÁŠEK, P. (2015). Polymeric microparticles composites with waste EPDM rubber powder. Agronomy Research, Vol. 13, No. 3, pp. 723-731.
    21. VALÁŠEK, P., & MÜLLER, M. (2014). EPDM rubber material utilization in epoxy composite systems. Agronomy Research, Vol. 12, No. 1, pp. 291-298.
    22. VAVRO, J., VAVRO, J. jr., PECUŠOVÁ, B., BURGET, M. (2018). Dynamic Analysis of Lever Mechanism for Manufacturing of Raw Tyres. Manufacturing Technology, Vol. 18 (1), pp. 145-148. DOI: 10.21062/ujep/68.2018/a/1213-2489/MT/18/1/145 Go to original source...
    23. VAVRO, J. jr., VAVRO, J., VAVROVÁ, A. (2019). Experimental and Numerical Modal Analysis of the Carbon Composite Plate Damaged by Cut. Manufacturing Technology, Vol. 19 (5), pp. 891-895. DOI: 10.21062/ujep/390.2019/a/1213-2489/MT/19/5/891 Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content