Manufacturing Technology 2020, 20(2):244-249 | DOI: 10.21062/mft.2020.033

Potential of using burning equipment in the engineering company and metallurgy

Vladimíra Schindlerová, Michal Bučko, Ivana Šajdlerová
Faculty of Mechanical Engineering, VSB – Technical University of Ostrava, 17. listopadu 2172/15, Ostrava-Poruba, 708 00. Czech Republic

Currently, companies have been trying to make the use of their technology, manufacturing capabilities and experienced workforce to respond flexibly to market demands. Collecting and processing of all relevant data in the company is one of the key points to which increased attention should be paid so as to maximize the efficient use of own resources and consequently ensure a continuous reduction of pro-duction costs. The article deals with the use of burning machines in engineering company. The product range involves the production of burnouts from standard and special materials as well as welded steel parts of structures. The company has long struggled to optimize the material and information flow between particular production operations. This paper was focused on information flow logistics, which proved to be the biggest weakness of the central material preparation department during the bottleneck analysis. The scientific contribution of the resolved issue can be seen mainly in the possibility of inter-connecting process analysis and optimization of material and information flows.

Keywords: Optimization, Information system, Burning machine, Production process, Process analysis

Prepublished online: August 17, 2020; Published: August 18, 2020  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Schindlerová V, Bučko M, Šajdlerová I. Potential of using burning equipment in the engineering company and metallurgy. Manufacturing Technology. 2020;20(2):244-249. doi: 10.21062/mft.2020.033.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. MILLER, A., SIMON, M. (2014). Model planning production and logistics activities in business networks. In. Procedia Engineering, Vol. 69, pp. 370 - 376. Elsevier. Vienna. ISSN 18777058 Go to original source...
    2. R. HORBAL, R., KAGAN, R., KOCH, T. (2008). Implementing lean manufacturing in high mix produc-tion environment. In. IFIP International Federation for Information Processing, Vol. 257, pp. 257 - 267. Springler. Boston. ISBN 978-038777248-6 Go to original source...
    3. VIDROVA, Z., CENIGA, P. (2018). Methods of material flows analysis. In. Proceedings of the 32nd Interna-tional Business Information Management Association, pp. 8149 - 8159. IBIMA. Spain. ISBN 978-09998551-1-9
    4. RÖNNHOLM, H., TAKALA, J. (1998). Improving the efficiency and effectiveness of production by ma-terials management. In. International Journal of Technology Management, Vol. 16, No. 1/2/3, pp. 78 - 92, In-derscience Publishers. Switzerland. ISSN 02675730 Go to original source...
    5. KELLNER, T., KYNCL, J., PITRMUC, Z., BERANEK, L., KANAK, M., KYNCL, M. (2019) Production Process Planning in Additive Manufacturing and Conventional Machining Technology Manufacturing Sys-tem. In. Manufacturing Technology, Vol. 19, pp. 232 - 237. University in Usti nad Labem. ISSN 1213-2489 Go to original source...
    6. FIDLEROVÁ, H., PRACHAŘ, J., SAKÁL, P. (2014). Application of material requirements planning as method for enhancement of production logistics in industrial company. In. Applied Mechanics and Materials, Vol. 474, pp.49 - 54. Trans Tech Publications. Switzerland. ISSN 1662-7482 Go to original source...
    7. KREJČÍ, L., SCHINDLEROVÁ, V., BUČKO, M., HLAVATÝ, I., MICIAN, M. (2019) The Application of PFMEA for Roller Bearings Production. In. Manufacturing Technology, Vol. 19, pp. 439 - 445. University in Usti nad Labem. ISSN 1213-2489 Go to original source...
    8. SCHINDLEROVÁ, V., ŠAJDLEROVÁ, I., LEHOCKÁ, D. (2018) Dynamic simulation for optimisation solution of manufacturing processes. In. MATEC Web of Conferences, Vol. 244, EDP Science. France. ISSN 2261-236X Go to original source...
    9. TUREČKOVÁ, K., NEVIMA, J., ŠKRABAL, J. MARTINÁT, S. (2018). Uncovering patterns of location of brownfields to facilitate their regeneration: Some remarks from the Czech Republic. In. Sustainabil-ity, Vol. 10, No. 6, pp. 224 - 234. MDPI. Switzerland. ISSN: 2071-1050. Go to original source...
    10. GREGUŠOVÁ, M., SCHINDLEROVÁ, V., ŠAJDLEROVÁ, I., MOHYLA, P., KEDROŇ, J. Practical Apllication of Simulation of Business Processes. In. International Journal of Social, Education, Economics and Management Engineering, 2015, Vol. 9, No. 2, WASET. pp. 424 - 429
    11. MODROVSKÝ, R. (2019) Optimization of Production Flow through the CRAFT Method. In. Manufacturing Technology, Vol. 19, pp. 114 - 117. University in Usti nad Labem. ISSN 1213-2489 Go to original source...
    12. MĚSÍČEK, J., RICHTAR, M., PETRU, J., PAGÁČ, M. KUTIOVÁ, K. (2018) Complex View to Racing Car Upright Design and Manufacturing. In. Manufacturing Technology, Vol. 18, pp. 449 - 456. University in Usti nad Labem. ISSN 1213-2489 Go to original source...
    13. LYČKA, D. (2019) Logistics of Production Lines. Bachelor Thesis. Ostrava: VŠB -Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Mechanical Technology

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content