Manufacturing Technology 2020, 20(2):229-236 | DOI: 10.21062/mft.2020.036

Analysis of small holes manufacturing for optomechanical components

Jan Podaný, Jan Tomíček
Faculty of Mechanical Engineering, CTU in Prague. Technická 1902/4, 160 00 Praha 6. Czech Republic

Small holes can be manufactured by several ways. It is important to define in what dimensions the small holes vary. Anyway, drilling is one of the oldest technologies of holes manufacturing. In small dimensions we use the term microdrilling for description. Beside this conventional way of manufacture there are also unconventional methods. Microdrilling bits very often break before they are worn. Therefore, the tool life of these bits its quite unexpectable. It is due to relatively high load against the drill bit strength. So, it is important to choose proper drill bit material, cutting geometry, construction, process liquid, clamping and cutting conditions. These parameters are import for achieving ideal conditions for microdrilling. Even a tiny change in pre-seted parameters can lead to destruction of these delicate tools. Fiber arrays are designed and manufactured for precise positioning of optical fibers in row (1D) or in plate (2D). Fiber arrays can contain most of fibers including polarization maintaining fibers (PMF).

Keywords: microdrilling, microdrilling bit, optomechanics, fiber array

Prepublished online: August 17, 2020; Published: August 18, 2020  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Podaný J, Tomíček J. Analysis of small holes manufacturing for optomechanical components. Manufacturing Technology. 2020;20(2):229-236. doi: 10.21062/mft.2020.036.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. HORKÝ, V., Nástroje pro mikrovrtání [online]. Praha, 2019 [quoted 2019-11-29]. Available at: https://dspace.cvut.cz/bitstream/handle/10467/84907/F2-BP-2019-Horky-Vaclav-Nastroje%20pro%20mikrovrtani.pdf?sequence=-1&isAllowed=y. Bachelor thesis. CTU, Faculty of me-chanical engineering, Praha. Thesis tutor Ing. BcA. Jan Podaný, Ph.D.
    2. KAPOOR, S., Journal of manufacturing processes [online]. Dearborn, Mich.: Society of Manufacturing Engineers, 1999- [quoted 2019-06-30]. ISBN 1526-6125
    3. LASCAM. Lascam [online]. [quoted 2019-11-29]. Available at: https://www.lascam.cz/lasery-pro-vrtani/
    4. BUREŠ, M., Využití laserového mikroobrábění pro úpravu povrchu 3D tištěných kovových dílů [online]. Plzeň, 2018 [quoted 2019-11-29]. Available at: https://otik.uk.zcu.cz/bitstream/11025/33064/4/BP_v11_rev_.pdf?fbclid=IwAR1Fd0Kbh_h-yn0Xoq6tR9m2ryYN67llZqKUW2-A3hU8cyZwlyfarzp3mlE. Bachelor thesis. University of West bohe-mia in Pilsen. Thesis tutor Doc. Ing. Miroslav Zetek, Ph.D.
    5. Lasery a Optika. Lao [online]. [quoted 2019-11-29]. Available at: http://www.lao.cz/lao-info-49/vyuziti-laseru-v-prumyslu--minulost-a-soucasnost-313
    6. LASCAM. Lascam [online]. [quoted 2019-11-29]. Available at: https://www.lascam.cz
    7. D'URSO, G., Process performance of micro-EDM drilling of stainless steel [online]. 2014 [quoted 2019-11-29]. Available at: https://link.springer.com/article/10.1007%2Fs00170-014-5739-1
    8. D'URSO, G., A model to predict manufacturing cost for micro-EDM drilling [online]. 2017 [quoted 2019-11-29]. Available at: https://link.springer.com/content/pdf/10.1007%2Fs00170-016-9950-0.pdf1
    9. ELUC. Elektronická učebnice: Obrábění elektronovým paprskem [online]. [quoted 2019-11-29]. Availa-ble at: https://eluc.kr-olomoucky.cz/verejne/lekce/1421
    10. MMSpektrum: Nekonvenční metody obrábění - 6. díl [online]. 2008 [quoted 2019-11-29]. Available at: https://www.mmspektrum.com/clanek/nekonvencni-metody-obrabeni-2.html
    11. MATLÁK, J., (2013) Povrchové zpracování vybraných ocelí pomocí elektronového svazku [online]. Brno, 2013 [quoted 2019-11-29]. Available at: https://dspace.vutbr.cz/xmlui/bitstream/handle/11012/24851/2013_DP_Matlak_Jiri_115841.pdf?sequence=1&isAllowed=y. Master thesis. BUT Brno. Thesis tutor Ing. Miloslav Kouřil, CSc.
    12. ORÍŠEK, P., (2016) Povrchové zpracování vybraných ocelí pomocí elektronového svazku [online]. Brno, 2016 [quoted 2019-11-29]. Available at: https://www.vutbr.cz/www_base/zav_prace_soubor_verejne.php?file_id=129199. Master thesis. BUT Brno. Thesis tutor Ing. Miloslav Kouřil, CSc.
    13. MMSpektrum: Nekonvenční metody obrábění [online]. 2007 [quoted 2019-11-29]. Available at: https://www.mmspektrum.com/clanek/nekonvencni-metody-obrabeni-2-2.html
    14. Slideplayer: Fyzikální metody obrábění [online]. 2013 [quoted 2019-11-29]. Available at: https://slideplayer.cz/slide/3638931/
    15. DEBNATH, K., SINGH, I., & DVIVEDI, A. (2015). Rotary mode ultrasonic drilling of glass fiber-reinforced epoxy laminates. Journal of Composite Materials, 49(8), 949-963. https://doi.org/10.1177/0021998314527857 Go to original source...
    16. NATH, CH., LIM, G.C.., ZHENG, H.Y., (2012) Influence of the material removal mechanisms on hole in-tegrity in ultrasonic machining of structural ceramics, Ultrasonics, Volume 52, Issue 5, 2012, Pages 605-613, https://doi.org/10.1016/j.ultras.2011.12.007. Go to original source...
    17. THOE, T.B., ASPINWALL, D.K., WISE, M.L.H., Review on ultrasonic machining (1998) International Journal of Machine Tools and Manufacture, 38 (1998), pp. 239-255 Go to original source...
    18. ICHIDA, Y. , SATO, R., MORIMOTO, Y., KOBAYASHI, K., (2005) Material removal mechanisms in non-contact ultrasonic abrasive machining Wear, 258 (2005), pp. 107-114 Go to original source...
    19. KOMARAIAH, M., REDDY, P.N., A study on the influence of workpiece properties in ultrasonic machin-ing International Journal of Machine Tools and Manufacture, 33 (1993), pp. 495-505 Go to original source...
    20. MAHADI, H., ZHAO, J., JIANG, Z, A review of modern advancements in micro drilling techniques, Jour-nal of Manufacturing Processes, Volume 29, 2017, Pages 343-375, https://doi.org/10.1016/j.jmapro.2017.08.006. Go to original source...
    21. WÜTHRICH, R., FASCIOM V., (2005) Machining of non-conductive materials using electrochemical discharge phenomenon-an overview International Journal of Machine Tools and Manufacture, 45 (2005), pp. 1095-1108 https://doi.org/10.1016/j.ijmachtools.2004.11.011 Go to original source...
    22. JANA, D., ZIKI, A,, WÜTHRICH, R., Forces exerted on the tool-electrode during constant-feed glass micro-drilling by spark assisted chemical engraving, International Journal of Machine Tools and Manu-facture, Volume 73, 2013, Pages 47-54, https://doi.org/10.1016/j.ijmachtools.2013.06.008. Go to original source...
    23. MAHADI, H., ZHAO, J., JIANG, Z., A review of modern advancements in micro drilling techniques, Journal of Manufacturing Processes, Volume 29, 2017, Pages 343-375, https://doi.org/10.1016/j.jmapro.2017.08.006. Go to original source...
    24. WÜTHRICH, R., SPAELTER, U.; WU, Y., BLEULER, H., A systematic characterization method for gravity-feed micro-hole drilling in glass with spark assisted chemical engraving (SACE) Published 4 August 2006 Publishing Ltd Journal of Micromechanics and Microengineering, Volume 16, Number 9 https://doi.org/10.1088/0960-1317/16/9/019 Go to original source...
    25. HUMAR, A. (2004) Technologie I, Technologie obrábění - 2.část, p.9, BUT Brno, Brno, [quoted 2019-11-29]. Available at: http://ust.fme.vutbr.cz/obrabeni/opory-save/TI_TO-2cast.pdf
    26. SQS - vláknová pole [online]. [quoted 2019-11-29]. Available at: https://www.sqs-fiberoptics.com/cs/produkty/vlaknova-pole
    27. KUBIŠOVÁ, M., PATA, V., SÝKOROVÁ, L., MALACHOVÁ, M., Use of cluster analysis for assessment of surface replicas machined by a laser beam Manufacturing Technology, vol. 17, pp. 489 - 493, 2017. ISSN 1213-2489. Go to original source...
    28. KUBIŠOVÁ, M.; PATA, V.; SÝKOROVÁ, L.; KNEDLOVÁ, J., Influence of laser beam on polymer mate-rial Manufacturing Technology, vol. 17, pp. 742 - 746, 2017. ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content