Manufacturing Technology 2021, 21(2):223-230 | DOI: 10.21062/mft.2021.023

Lightweight Design and Optimization Effect Evaluation of Hydro Generator Set

Yongyi Liao1,2, Baiyu Liao1
1 Key Laboratory of Vibration and Noise under Ministry of Education of Yunnan Province, Kunming University of Science and Technology, Kunming 650500, China
2 Continuing Education College, Kunming University of Science and Technology, Kunming 650051, China

With the increase of hydro generators capacity and unit size, the requirement of lightweight is prominent. Taking a mixed-flow hydro generator as the research objects, the strength, the stiffness and the dynamic characteristics of upper bracket, stator frame, lower bracket and head cover have been simulated and analyzed by means of establishing their finite element models. Based on sizing optimization design method, plate thicknesses of the main parts were selected as the design variables, and strength and stiffness were taken as the constraint conditions to optimize them with the minimum mass as the objective function. Through lightweight optimization design, the maximum normal stress and maximum displacement of the optimized main parts are within the allowable value range, modal analysis shows that their dynamic characteristics meet the requirements. The lightweight optimization design reduced the weight of hydro generator by 3457kg in total. Optimization effect evaluation under full load operation and site test between the original and improved hydro generator set show that the dynamic characteristics are improved and the performances meet the design requirements.

Keywords: Hydro generator set, Lightweight optimization design, Sizing optimization, Structural improvement
Grants and funding:

Supported by National Natural Science Foundation of China grants program (61863016) and Yunnan province science and technology plan project (S2016DC069).

Received: October 28, 2020; Revised: February 7, 2021; Accepted: February 16, 2021; Prepublished online: March 22, 2021; Published: April 6, 2021  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Liao Y, Liao B. Lightweight Design and Optimization Effect Evaluation of Hydro Generator Set. Manufacturing Technology. 2021;21(2):223-230. doi: 10.21062/mft.2021.023.
Download citation

References

  1. YANG H., LIU G., LIU Y., et al. (2014). The current research and development analysis of condition monitoring for hydroelectric generating units. In: Journal of China Institute of Water Resources and Hydropower Re-search, Vol. 12, No. 3, pp. 300-305.
  2. Sutasn T., Arkarapon S., Wiriyakorn P. (2017). Finite element analysis of counterbore-shaped parts by using sheet-bulk metal forming process. In: Manufacturing Technology, Vol. 17 (4), pp. 597-602. Go to original source...
  3. Jan M., Stefan G., Martin P. et al. (2019). Optimization of the runner numerical design dimensions using the simulation program. In: Manufacturing Technology, Vol. 19 (2), pp. 273-279. Go to original source...
  4. WANG B., LIU X. L., LIU J. S., et al. (2015). Structural optimization and manufacturing for region of high stress of pelton turbine. In: Journal of Mechanical Engineering, Vol. 51, No. 21, pp.148-155. Go to original source...
  5. LI W., ZHANG H. Q., QIAN Y., et al. (2010). Finite element analysis for outer-movement accidents of stator core laminated sheets of hydro-generator. In: Journal of Zhejiang University (Engineering Science), Vol. 44, No. 5, pp.1032-1037.
  6. QI X. Y., LI C. C., ZHNG X. J., et al. (2008). The reliability design and calculation of hydraulic turbine head cover. In: Large Electric Machine and Hydraulic Turbine, No. 2, pp. 40-43.
  7. ZHAO D. L., WANG H. Y., WU Z. J., et al. (2015). Research on rigidity & strength analysis of Francis runner and improvement measures. In: Journal of Mechanical Strength, Vol. 37, No. 4, pp. 748-753.
  8. SHAO G. H., WANG Q. Y. (2013). Optimization design of the high specific speed Francis turbine of Zangmu power station. In: Water Sciences and Engineering Technology, No. 3, pp. 51-56.
  9. MARTIN V., LUMÍR H., ADAM B. (2016). Structural damping of mechanical vibration. In: Manufacturing Technology, Vol. 16 (6), pp. 1379-1382. Go to original source...
  10. YUAN X. M., MA L., WU P., et al. (2013). Vibration analysis and optimization for upper bracket of high speed suspended hydro generator. In: Machine Design & Research, Vol. 29, No. 6, pp. 108-111.
  11. LIAO Y. Y., LIAO B. Y. (2019). Lightweight optimization design of water turbine head cover based on maximum normal stress. In: Journal of Kunming University of Science and Technology (Natural Science), Vol. 44, No. 1, pp. 47-53.
  12. LIAO Y. Y., LIAO B. Y. (2019). Lightweight design of hydro generator upper bracket based on sizing optimization. In: Water Power, Vol. 45, No. 5, pp. 91-94, 117.
  13. LIAO Y. Y., LIAO B. Y. (2019). Finite element analysis and sizing optimization of hydro generator stator frame. In: Chinese Journal of Construction Machinery, Vol. 17, No. 3, pp. 215-220.
  14. LIAO Y. Y., LIAO B. Y. (2020). Finite element analysis and Lightweight design of hydro generator lower bracket. In: Manufacturing Technology, Vol. 20, No. 1, pp. 66-71. Go to original source...
  15. YAMASAKI S., NISHIWAKI S., YAMADA T., et al. (2010). A structural optimization method based on the level set method using a new geometry-based re-initialization scheme. In: International Journal for Numeri-cal Methods in Engineering, Vol. 83, No. 12, pp. 1580-1624. Go to original source...
  16. CHRISTENSEN P. W., KLARBRING A. (2009). An introduction to structural optimization. Springer, Dordrecht.
  17. MARLER R. T., ARORA J. S. (2004). Survey of multi-objective optimization methods for engineering. In: Structural and Multidisciplinary Optimization, Vol. 26, No. 6, pp. 369-395. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.