Manufacturing Technology 2021, 21(5):592-599 | DOI: 10.21062/mft.2021.079

Increased Cutting Conditions when Machining Heat-resistant Steel Using Indexable Inserts

Pavel Dostal ORCID...1, Marek Sadilek ORCID...1, Lukas Kusnir ORCID...1, Karel Kouril ORCID...2, Robert Cep ORCID...1
1 Faculty of Mechanical Engineering, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic
2 Faculty of Mechanical Engineering, Technicka 2896/2, 616 69 Brno, Czech Republic

The topic of the article is the increase of cutting conditions in the machining of heat-resistant steel using exchangeable inserts. The main part is the design of a new technology for machining one of the heat-resistant materials using replaceable inserts, including a discussion of any defects and economic evaluation. The aim is to reduce production costs and contribute to the elimination of production times. These modifications of technologies have a positive effect on the overall economy of produc-tion and the use of new methods in practice. Heat-resistant steels have found application in many branches of production, especially in the aerospace industry for jet engine components. Their specific properties need a more detailed examination of the optimal conditions for their processing.

Keywords: Heat-resistant steels; machining; cutting conditions; indexable inserts; aviation
Grants and funding:

Article has been done in connection with projects Students Grant Competition SP2021/100 financed by the Ministry of Education, Youth and Sports and Faculty of Mechanical Engineering V©B-TUO and by project MPO TRIO "FV40115 Development of a new series of medium-pressure valves, their manufacturing technology and testing methodology, simulating 60 years of service life” financed by the Ministry of Industry and trade, Czech Republic.

Received: June 10, 2021; Revised: August 3, 2021; Accepted: August 27, 2021; Prepublished online: October 21, 2021; Published: November 25, 2021  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Dostal P, Sadilek M, Kusnir L, Kouril K, Cep R. Increased Cutting Conditions when Machining Heat-resistant Steel Using Indexable Inserts. Manufacturing Technology. 2021;21(5):592-599. doi: 10.21062/mft.2021.079.
Download citation

References

  1. HAVLIK, V. Increasing the Cutting Conditions during Machining Heat Resisting Steels with the Use Inserts: bachelor thesis. Ostrava: V©B - Technical University of Ostrava, faculty of Engineering, Department of Mechanical Technology, 2012, 48 p. Thesis head: Ing. Marek Sadílek, Ph.D.
  2. Material AiResist 319 [online], [cit. 2012-05-05]. Characteristics of material AiResist 319. Available on WWW: <http://books.google.com/books?id=RzMOiOEQoMC&pg=PA42&dq=material+AiResist319&hl=en&sa=X&ei=FtiKTmWH4j3sga5nK3fCw&ved=0CDEQ6AEf3#
  3. Deawoo puma 450a machine tool manual. Private materials and information provided by honeywell aerospace olomouc.
  4. Cutting tools from NTK catalog [online], [cit. 2012-05-16]. Catalog of cutting tools from the company NTK. Cutting speeds of various types of inserts. Available on WWW: <http://www.ntkcuttingtools.com/catalog/pdf/NTK-General_Overview.pdf>
  5. Kennametal.Cz/Cd_Katalog [Online], [Cit. 2012-05-01]. Catalog Of Cutting Tools From Kennametal. Vbd Designation From Kennametal. Available On Www: Http://Www.Kennametal.Com/Images/Repositories/Pdfs/A-09-02311_Aerospace_Solutions_2011.Pdf;Jsessionid=Jlqjkmwzh3j4xlaucyosfevmcqfb0iv0
  6. AB Sandvik Coromant, Machining Manual - Practice Book. 1st edition Prague, 1997. 980 p. ISBN 91- 97 22 99-4-6
  7. Techtydenik.cz [online], [cit. 2012-05-16]. Cutting tools for machining selected material groups. Available on WWW: http://techtydenik.cz/reznenastroje.php?part=12
  8. MAREK, Martin, Martin NOVÁK and Karel ©RAMHAUSER. The Impact of Changes in InFeed Rate on Surface Integrity after Chrome Plate Grinding by Silicon Carbide. Manufacturing Technology [online]. 2019, 19(2), 284-291 [cit. 2021-6-7]. ISSN 12132489. Available from: doi:10.21062/ujep/284.2019/a/1213-2489/MT/19/2/284 Go to original source...
  9. SCHMITZ, Tony L. a Kevin S. SMITH. Machining dynamics: frequency response to improved productivity. Second edition. Cham: Springer, [2019]. ISBN 978-3-319-93706-9. Go to original source...
  10. ČUBAN, Jiří and Jaroslav KOVALČÍK. Comparison of coated carbide cutting tool inserts used in machining of cylinder liners made of grey cast iron. Manufacturing Technology [online]. 2009, 9(1) [cit. 2021-6-7]. ISSN 12132489. Available from: doi:10.21062/ujep/x.2009/a/1213-2489/MT/9/1/23 Go to original source...
  11. HOCHENG, Hong a Hung-Yin TSAI, ed. Advanced analysis of nontraditional machining. New York: Springer, c2013. ISBN 978-1-4614-4053-6. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.