Manufacturing Technology 2023, 23(1):32-39 | DOI: 10.21062/mft.2023.004
Economical and Statistical Optimization of the Maintenance in the Production Process
- Department of Designing and Machine Components, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 166 07 Prague 6, Czech Republic
The article presents a comprehensive example that demonstrates the control of a plastic injection process in practice. It includes measurement and analysis of the production process, its control using a control diagram to bring the production process to a state under statistical control by applying tests of non-random clusters and subsequent evaluation of process capability. The last part of the article gives an example of the maintenance of economical statistical optimization for four scenarios.
Keywords: Quality control, control chart, process capability, process control, injection moulding, plastic maintenance management, economic and statistical optimization, non-conforming process management
Received: September 28, 2022; Revised: September 28, 2022; Accepted: January 13, 2023; Prepublished online: April 24, 2023; Published: May 3, 2023 Show citation
References
- CÉZOVÁ E. (2008). Economic-statistic design control chart, Request 08, CQR VUT Brno, ISBN 978-80-214-3774-6
- CÉZOVÁ E., DOHNAL G. (2012). Economical and statistical optimization of control chart, Robust 2012, ISSN 1210-8022, pp. 141 - 151, 2012
- CÉZOVÁ E. (2021) Quality control management for plastic injection moulding production, Experimental and Calculation methods, EVM 2021, Ústí nad Labem, ISBN 978-80-7561-316-5, pp. 61-67
- CÉZOVÁ, E. (2021). On the appropriate preparation and realization of production process quality attribute measurement. (World Symposium on Mechanical - Materials Engineering & Science 9-11 September, pp.1-9, in https://iopscience.iop.org/article/10.1088/1757-899X/1190/1/012035)
Go to original source...
- SAPUTRA, T.M. et al Quality improvement of moulding machine through statistical process control in plastic industry. Journal of Applied Research on Industrial Engineering Vol. 6, No. 2 (2019) 87-96
- SVOBODA, M., SOUKUP, J., SAPIETA, M.: Improving the quality of cutting flat glass. in MATEC Web of Conferences157, 04004 (2018) https://doi.org/10.1051/matecconf/201815704004
Go to original source...
- CÉZOVÁ, E., LOPOT, F., MACHAČ, M., KAMENICKÝ, J.: Experimental measurements on a stand for a grain sampler, In: Manufacturing Technology, in print (2022), DOI: 10.21062/mft.2022.047
Go to original source...
- VONDRÁ©EK, D., HADRABA, D., MATĚJKA, R., LOPOT, F., SVOBODA, M., JELEN, K.: Uniaxial Tensile Testing Device for Measuring Mechanical Properties of Biological Tissue with Stress-Relaxation Test under a Confocal Microscope, In: Manufacturing Technology, Vol.18, No. 5 (2018) pp. 866-872, ISSN: 1213-2489
Go to original source...
- ZHOU, W., ZHU, G.: Economic design of integrated model of control chart and maintenance management. Mathematical and computer modelling, pp. 1-7.
- HANIDA, A.S., NORAZLIN, K., NORAIDAH, S., NORAIDAH, A., HAIRULLIZA, M. J.: Statistical process control in plastic packaging manufacturing: A case study. In International Conference on Electrical Engineering and Informatics, 2009, pp. 199-203
- REX C KANU.: A study of process variability of the injection molding of plastics parts using statistical process control, 120 th ASEE Annual Conference&Exposition, 2013, pp 8
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.